Zhitai TiPlus 9100 1 TB Review 23

Zhitai TiPlus 9100 1 TB Review

Test Setup »

The Drive




The drive is designed for the M.2 2280 form factor, which makes it 22 mm wide and 80 mm long.


PCI-Express 5.0 x4 is used as the host interface to the rest of the system, which doubles the theoretical bandwidth compared to PCIe 4.0 x4.


On the PCB you'll find the controller and two flash chips. There is no DRAM cache, the drive uses HMB instead.


The sticker on the drive is really just a paper sticker (no copper core or similar conductor), so it doesn't assist with managing thermals.

Chip Component Analysis

SSD Controller

The controller on this drive is a Maxio MAP1802, a cost-optimized PCI-Express Gen 5 controller manufactured on TSMC's 6 nm process. It runs four Arm Cortex-R8 cores and connects to the NAND flash over four channels at 3600 MT/s. MAP1802 is a DRAM-less design that relies on Host Memory Buffer (HMB) instead of a dedicated DRAM chip, borrowing a small portion of system memory for its mapping tables, which helps keep both cost and power consumption down.

Interesting to note is that Zhitai has rebranded the controller—there are no visible markings on the package to indicate that it is a Maxio part, or even that it is the MAP1802. We identified it based on the IC package's style, shape and size, which match the MAP1802 exactly.

SSD Flash Chips

The two flash packages are YMTC 3D TLC NAND (X4-9070), built on the company's Xtacking 4.0 architecture with 267 layers. Each package has a capacity of 512 GB.
Next Page »Test Setup
View as single page
Nov 20th, 2026 13:29 PST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts