Zhitai TiPlus 9100 1 TB Review 23

Zhitai TiPlus 9100 1 TB Review

Rendering, Virtualization & File Synchronization »

Thermal Throttling

Due to the compact form factor, M.2 drives lack the ability to actively cool themselves, usually having to rely on passive airflow instead. All vendors include some form of thermal throttling on their drives as a safeguard, which limits throughput once a certain temperature is exceeded.

On this page, we will investigate whether the tested drive has such a mechanism, how high temperatures get, and what effect this has on performance. We will test the drive in a typical case, installed in the M.2 slot between the CPU and graphics card.

Each of the charts has time moving from left to right, showing transfer speeds in MB/s and also reporting the drive's temperature in degrees Celsius (measured using SMART).

Real-Life Temperatures

This thermal testing approach simulates typical SSD workloads using PCMark10 storage traces, which replay real-world disk usage without executing the full applications. It helps us create consistent, realistic usage patterns, not just primitive synthetic "random read" or "random write" operations. We can also reduce idle gaps in the trace playback to make the SSD work harder, but not unrealistically so. The recorded activity comes from apps like Adobe and Office, as well as gaming and file transfers. We repeat the entire test sequence three times to extend the total workload duration, followed by a cool-down period to observe how the SSD dissipates heat.


Even without a heatsink, the drive won't run into thermal throttling in typical usage.

Thermal Stress Test

In these tests, the SSD is hammered by nonstop incoming writes to simulate worst-case thermal stress under the heaviest possible load. The test also checks how the drive deals with thermal throttling and whether it continues to function normally.

Drive with Small Thermalright Heatsink


I installed a Thermalright TR-M2, which is a compact full-metal heatsink. There's a little bit of thermal throttling, but it takes quite a long time of non-stop heavy activity.

Drive with Big Thermalright Heatsink


With the much bigger Thermalright HR-10, there is no more throttling, and temperatures are much lower.

Thermal Image & Hot Spot

Thermal Camera FLIR Image during Write Test

For this thermal image, we deliberately ran the drive without a heatsink, to reveal where the heat concentrates on the PCB. Unsurprisingly, the controller is by far the hottest spot—the surface temperature of the sticker on top of it reached around 100 °C. Thermal throttling is confirmed to be functioning properly to protect the drive.
Next Page »Rendering, Virtualization & File Synchronization
View as single page
Nov 20th, 2026 14:23 PST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts