BIWIN is a major memory and SSD OEM that manufactures products for leading PC brands, including Lenovo, HP, and Acer. These include everything from USB flash drives, to portable SSDs; and even memory DIMMs. Acer has been trying to enter the DIY hardware market in a big way with its Predator brand, it's tapping into BIWIN for the memory side of things. We've had the Acer Predator Hermes DDR5 RGB series at the high-end; and the Pallas II DDR5 series at the entry level, and Acer is looking to fill the gap with the Vesta II DDR5 series. The original Vesta II series won a Red Dot design award in 2022. The Vesta II comes in certain upper mid-range speeds of DDR5-6000, DDR5-6400, DDR5-6600, and DDR5-6800; with capacities that include 32 GB (2x 16), and 64 GB (2x 32 GB). We also ran into some SSDs that strick to Acer's main marquee, which includes the FA200, a PCIe Gen 4 drive, which is based on a high-end Gen 4 platform, with speeds of up to 7.2 GB/s sequential reads, and up to 6.2 GB/s sequential writes. The drive comes in capacities of up to 4 TB.

Switching gears, we see the first Lenovo-branded DIY client SSDs in the retail channel. The LN960 is a fairly premium M.2-2280 drive with a Gen 4 x4 interface, capacities of up to 4 TB, sequential speeds of up to 7.4 GB/s, and a graphene-based heatspreader. The LN860 is an entry-level NVMe drive based on a Gen 3 x4 interface, with sequential speeds of up to 3.5 GB/s. The LS800 is is being offered more as an upgrade option for those still on older machines with a 2.5-inch SATA 6 Gb/s drive bay. It comes in capacities of up to 1.92 TB, has modern SLC caching technology, and offers sequential speeds of up to 520 MB/s.

The emergence of the COVID-19 pandemic led to severe delays in manufacturing and logistics. In particular, governments worldwide began implementing border restrictions in 2Q20 to combat the ongoing health crisis, leading to a sudden decline in order volumes for channel-market SSDs, according to TrendForce's latest investigations. Annual shipment of SSDs to the channel (retail) market reached 111.5 million units in 2020, a 15% YoY decrease. In terms of market share by shipment, Kingston, ADATA, and Kimtigo once again occupied the top three spots, respectively.

Looking at the channel market for SSDs as a whole, NAND Flash suppliers (among which Samsung possessed the largest market share) accounted for around 35% of the total shipments in 2020, while SSD module makers accounted for the other 65%. The top 10 module makers accounted for 71% of channel-market SSD shipments from all SSD module makers. Taken together, these figures show that the market remained relatively oligopolistic in 2020. However, it should be noted that TrendForce's ranking of SSD module makers for 2020 takes account of only products bound for the channel market and under brands owned by the module makers themselves; NAND Flash suppliers were therefore excluded from the top 10 ranking.

BIWIN, a leading chip manufacturer for flash storage, reached an agreement with Acer to bring Acer-branded memory and personal SSD storage products to customers in the United States and China. The product offerings will take advantage of BIWIN's manufacturing capabilities and Acer's global brand recognition to provide the latest memory and storage solutions for both professional and home users. The new Acer-branded SSD portfolio offers a range of 2.5" SATA, M.2 SATA and M.2 PCIe NVMe drives. The entry-level 2.5" SA100 offers performance and reliability and is available in capacities from 120 GB to 1.92 TB.

The RE100 is available as a standard 2.5" SATA drive as well as in a smaller M.2 SATA form factor. With capacities from 128 GB up to 1 TB (M.2) and 4 TB (SATA) and with read and write speeds of 560 MB/s and 520 MB/s, the RE100 performs close to the SATA interface's maximum speed and is an extremely reliable solution in terms of speed and capacity to upgrade any desktop PC or laptop to the latest SATA technology. In terms of maximizing performance, an Acer-branded M.2 PCIe Gen3 NVMe drive, the FA100—is available in capacities from 128 GB up to 2 TB, reaching up to 3300 MB/s read and 2700 MB/s write speeds. This exceptional performance is six times faster than standard SATA SSDs.

BIWIN, a leading chip manufacturer for flash storage, reached an agreement with Acer to bring Predator-branded memory and personal SSD storage products to customers in the United States and Canada. The product offerings will take advantage of BIWIN's manufacturing capabilities and Predator's global brand recognition to provide the latest memory and storage solutions for both casual and professional gamers.

The Predator brand is known for providing hardcore PC gamers and esports professionals with high-end gaming solutions that give them a competitive edge. The new high-end flagship memory and storage portfolio under the Predator brand begins with state-of-the-art memory modules and blazing fast solid-state drives. With a powerful "cyberpunk inspired" design to match the power of its performance, the new Predator Apollo memory module series offers speed, style and special lighting. Its ultra-high frequency, ultra-low timing, and overclocking capabilities will satisfy even the most speed-thirsty gamers.

BIWIN announced its own retail channel brand of memory products in the North American region, named Biwintech. BIWIN is a Shenzhen-based OEM of DRAM and NAND flash client-segment memory products that supplies to giants in the PC industry, such as HP. It is now bringing a sizable portfolio of memory products under its own Biwintech brand to the market, which include DDR4 UDIMM and SO-DIMM PC memory modules, M.2 NVMe SSDs, 2.5-inch SATA SSDs, USB portable SSDs; and memory cards, including SDXC and microSDXC cards, CFast cards, and CFexpress cards. Interestingly, the announcement doesn't mention UFDs (USB flash drives). Biwintech will go to market with 5-year warranties on all its products, including 9 to 5 phone- and 24-hour e-mail tech support.

HP today unveiled the Portable SSD P500. These drives come in capacities of 1 TB, and feature a USB 3.2 gen 1 interface, with a single connection handling both power and host connectivity. A USB type-C to type-A male-to-male capable, and a type-C to type-A adapter are included. The drive measures 79.1 mm x 53.9 mm x 10 mm (WxDxH), weighing 45.4 g, and features a solid aluminium body that comes in four color options - aquamarine, cherry red, gray, and silver; all with diamond-cut edges. As for performance, its OEM Biwin claims sequential read speeds of up to 420 MB/s sequential reads, and up to 255 MB/s sequential writes. The company didn't mention pricing.Update 08:32 UTC: The HP P500 is currently retailing for 699 RMB - 899 RMB in China, which converts to $98 - $126, so 10-12 cents per GB.

BIWIN, a world-leading expert in the development and manufacture of flash and advanced NAND flash memory, has launched a new business-grade SSD that is perfect for the digital signage market, the half slim H6201. There are many different industrial applications for digital signage and the field is growing. To operate in public and outdoor environments, it is critical that the components are reliable, scalable, efficient and of low maintenance cost.

Flash memory is suitable for industrial grade products for a variety of reasons. By comparing with traditional HDD, SSDs are far more reliable because they have no moving parts. This makes them an ideal solution for deployments where heat, cold, dust, humidity and even shock and vibration are common. BIWIN SATA II Half-slim SSD H6201's MTBF of 2,000,000 hours is more than doubled comparing with mechanical hard drives, leading to lower maintenance costs. H6201 is extremely fast with the ability to handle high IO data throughput such as multiple data streams suitable for graphics and video in a very small package. SSDs are much more energy efficient. For example, H6201's maximum power consumption is 0.97W, which eliminates the dependency on system fans for cooling. The result is a quieter design with lower annual energy costs.

BIWIN, a world-leading expert in the development and manufacture of flash and advanced NAND flash memory, has introduced two Industrial Grade Disk-On-Modules (DOMs) with SATA interface, D5211 and D5212. They are well suited for installation needing long endurance parts with high reliability under rugged conditions.

D5211 and D5212, available in capacities of up to 16GB, are SLC NAND based modules with a PE Cycle as high as 100,000 times. The products complies with strict, industrial grade controllers to ensure a stable operating performance under extended temperature ranges between -40°C to 85°C.

BIWIN, a world-leading expert in the development and manufacture of flash memory, has launched a new business-grade SSD M5301, a full sized mSATA that runs at 99% lower power consumption under DEVSLP mode. This is designed to meet the ever more aggressive power/battery life requirements of today's Ultrabook and other compact mobile devices. The company will be presenting their latest products at the Computex trade show in Taiwan at Booth No. J0218.

DEVSLP enables hosts and devices to completely shut down the SATA interface, saving more power vs. the existing Partial and Slumber power states, which require the physical layer to be left powered. DEVSLP will help to enable a new generation of power friendly SATA-based mobile devices.

Biwin, an industry leader in flash storage products, today announced a new slim-profile 7 mm casing option for their entire range of 2.5-inch client and enterprise class SATA III SSDs. The new slim-profile SSDs are 26% slimmer than most standard SATA SSDs which measure 9.5 mm thick, allowing for much higher density SSD deployments.

This 7 mm enclosure is available immediately on the company's Elite, Pro and Smart Series 2.5-inch SATA II and SATA III SSDs, as well as the company's new NuvoDrive NX and NuvoDrive PX 2.5-inch SATA III SSDs in capacities up to 480 GB. The new casing, like Biwin's existing 9.5 mm case, is constructed of black anodized aluminum to provide rugged protection of components in a featherweight design.

Biwin, an industry leader in flash storage products, today launched 6 Gbps Elite Series Mini SATA (mSATA) III SSDs in 25GB, 60 GB and 120 GB capacities that support sequential read and write speeds up to 500 MB/sec and 480 MB/sec respectively, and up to 50,000 4k random write IOPS. These Elite Series mSATA III SSDs, based on the SandForce SF-2281 SSD processor, rapidly accelerate storage performance in modern ultrabooks and small form factor industrial computers.

These drives feature state of the art AES encryption, wear leveling and ECC, and robust resistance to shock, vibration, dust and other environmental threats, making them an excellent choice for primary storage in industrial computing. Elite Series mSATA III SSDs will begin shipping in July to resellers and OEMs worldwide. The 120 GB model will retail for about $1 per Gigabyte.

Biwin, an industry leader in flash storage products, will showcase a working PCIE based solid state drive (SSD) in a technology demo system in their booth at the Computex convention this week in Taipei. Although this product will not be released for sale, it is the precursor to the company's future line of PCIE-based enterprise class SSDs.

Today's SATA SSDs deliver sequential and random performance that is dramatically faster than HDDs. But enterprise applications demand ever greater performance, requiring storage solutions with far greater bandwidth than SATA can provide. PCI Express, or PCIE, offers three big advantages as an SSD interface:
- universal availability;
- massive bandwidth in a single volume;
- general freedom from compatibility issues.

Biwin, an industry leader in flash storage products, today announced the NuvoDrive PX enterprise class 2.5 inch SATA III 6 Gbps SSD that supports up to 85,000 random write IOPS and features data loss protection in the event of sudden power failure.

NuvoDrive PX is based on the LSI SandForce SF-2582 Flash Storage Processor, which packs the vanguard of enterprise reliability features such as global wear leveling, NCQ support, SMART commands support, and an ECC engine capable of correcting up to 55 bits per 512-byte sector.

Biwin, an industry leader in flash storage products, today announced the world's first 10-channel 2.5-inch SATA III (6 Gbits/sec) SSD, the enterprise class NuvoDrive NX, offered in 80 GB, 160 GB and 300 GB capacities.

Virtually all current SATA III SSDs have 4- or 8-channel controllers. The NuvoDrive NX's is based on an advanced new 10-channel controller that alleviates the issue of flash bandwidth on the SATA III bus for high speed sequential transfers. The 10-channel controller also, for the first time, makes popular 80 GB, 160 GB and 300 GB capacities available in a SATA III SSD.

Embedded computing OEMs are seeking ways to shorten their design cycles and save precious space inside their systems. Biwin, an industry leader in flash storage products, today announced an e-MMC SSD in a 169-ball BGA chip that addresses both those demands, enabling customers to design in a complete storage solution on a single chip with an industry standard interface.

Biwin's new e-MMC SSDs are offered in capacities from 2 GB to 64 GB. They integrate both flash and a full SSD controller into a single chip, featuring advanced SSD features such as ECC, wear leveling and bad block management. They also include two key new features for embedded memory applications: power-on boot and explicit sleep mode, which translate to significant benefits for the end-user.

The vast majority of laptop and desktop computers sold today are equipped with rotating hard disk drives (HDDs), making the storage system the biggest bottleneck in most client computing applications. Biwin, an industry leader in flash storage products, today announced Elite Series SATA III SSDs, based on the LSI SandForce SF-2281 Flash Storage Processor, that are designed to substantially improve storage performance in laptops and desktops.

With a standard 2.5" form factor (dimensions: 100 x 69.8 x 9.5 mm), Elite Series SSDs are compatible with virtually any desktop computer and millions of laptops. They support 6 Gbps SATA III, and are downward compatible with 3 Gbps SATA II systems.

Biwin today announced the opening of Biwin America, Inc., in San Jose, California to develop and market new flash based SSD storage solutions for enterprise, embedded and client applications.

Biwin is already an established leader in OEM and ODM USB flash drives. The company boasts impressive manufacturing strength that includes die sorting and packaging, over 20 SMT lines, and sophisticated test and QC processes. The founding of Biwin America, Inc., in the heart of Silicon Valley, marks the company's expansion into the USA market with a focus on expanding their existing SSD product portfolio. The company will sell its products directly to OEMs as well as through distribution.