Wednesday, June 1st 2016

Raijintek Unveils its First Passive Liquid Cooler

Raijintek unveiled its first liquid cooler that works without a prime-mover for the coolant (i.e. no pump). Further, its radiator lacks fans (i.e. no power, no noise). This closed-loop cooler works in the same principle as a heat pipe, with a combination of convention and phase-change doing the heavy lifting of heat-transfer. Heat from the source (your CPU) causes the special coolant to change phase to vapor, move to the heat-exchanger (radiator), where it condenses back to liquid, and flows back down to the block. We saw this contraption in action, and we can tell you that it works. It is ready for the real-world. Raijintek spent vast amounts of R&D budget developing this technology, and has patented it in most markets. We could see the first products based on this technology very soon.
Add your own comment

25 Comments on Raijintek Unveils its First Passive Liquid Cooler

#2
Joss
well.... I'm impressed
Posted on Reply
#3
RejZoR
But wouldn't saturation of heat also slow down the circulation. The bigger the difference, the bigger is flow. But as the difference becomes smaller when heat is saturated within the coolant, it'll circulate slower and get even hotter.
Posted on Reply
#4
thevoiceofreason
RejZoRBut wouldn't saturation of heat also slow down the circulation. The bigger the difference, the bigger is flow. But as the difference becomes smaller when heat is saturated within the coolant, it'll circulate slower and get even hotter.
Possibly adding a slow fan on the radiatior would make it more efficient. I will take the sound of a fan over a pump any day.
Posted on Reply
#6
BarbaricSoul
JUST WOW :eek:, an AIO liquid cooler that can't have pump issues. I may go back to a AIO if this is good enough to cool a OC'ed chip running full load for weeks on end.
Posted on Reply
#7
Steamroller
thevoiceofreasonPossibly adding a slow fan on the radiatior would make it more efficient. I will take the sound of a fan over a pump any day.
Yeah! Much easier to find some quality and silent fans than to listen to the crappy AIO pump sound.
Posted on Reply
#9
Air
It will require an special coolant with low boiling point. Performance will be very dependent on the radiator positioning (avove or bellow cpu).
Posted on Reply
#10
AsRock
TPU addict
AirIt will require an special coolant with low boiling point. Performance will be very dependent on the radiator positioning (avove or bellow cpu).
I would of thought above for best performance.

Anyways why not show a real test of this in action ?, that supposed to be hot steamy water ?, umm i need to see it actually working not this rubbish.
Posted on Reply
#11
SAL9000
There is another cooling system that uses a similar method from a french company named Calyos and this company made a version for a PC. www.modding.fr/presentation-le-pc-0db-de-calyos/
I first saw this when searching for supercomputers and liquid cooling so they have the expertise
Posted on Reply
#12
Air
AsRockI would of thought above for best performance.

Anyways why not show a real test of this in action ?, that supposed to be hot steamy water ?, umm i need to see it actually working not this rubbish.
Yeah, im not sure it would even work below. Also agree about this test being pretty bad. All it shows is that the liquid moves inside the pipes... no information about temperatures, heat dissipated, etc...
Posted on Reply
#13
Caring1
AirIt will require an special coolant with low boiling point. Performance will be very dependent on the radiator positioning (avove or bellow cpu).
I would have thought also it requires a low boiling point to vaporise without cooking the CPU.
Also the design optimally requires the block to be horizontal or the positioning of the inlet and outlet to be upper most.
Posted on Reply
#14
Potatoking
Pretty sure this is a joke
I cant be the first one to realize
Posted on Reply
#15
eidairaman1
The Exiled Airman
bulky version of a heatpipe cooler pretty much.
Posted on Reply
#16
yogurt_21
eidairaman1bulky version of a heatpipe cooler pretty much.
this...seriously.
Posted on Reply
#17
thesmokingman
Raijintek spent vast amounts of R&D
Simple rad, some fittings, simple block, tubing... that equals vast amounts?
Posted on Reply
#18
PopcornMachine
Some here are missing the point. It's the 'special coolant' that makes this different, and probably required a lot of R&D.

And until the cooling efficiency is tested and verified, it is to early to draw a conclusion.

But if this does provide the cooling of a custom loop without a pump, sign me up.
Posted on Reply
#19
truth teller
PopcornMachineSome here are missing the point. It's the 'special coolant' that makes this different, and probably required a lot of R&D.
create concoction that evaporates at 50ºc under a slightly increased pressure (ethyl alcohol is at around 75ºc)
spend millions of dollars on something else
...
profit?
Posted on Reply
#20
R-T-B
truth tellercreate concoction that evaporates at 50ºc under a slightly increased pressure (ethyl alcohol is at around 75ºc)
spend millions of dollars on something else
...
profit?
You seem to be missing the "easier said than done" part of that equation.
Posted on Reply
#21
Keullo-e
S.T.A.R.S.
World's first passive? Uhm, Zalman Reserator anyone..?

Yeah, it had a pump, but still it was passive-cooled..
Posted on Reply
#22
geon2k2
Simple things are usually very hard to do.

This sounds interesting, but we'll have to see some reviews first and then compare the price with the performance and the competition. If this will be in the 3 digits $$$ area from price perspective and offer more or less the same performance as a 30$, typical air cooler ... it will not be such amazing product anymore. But let's see there could still be a market for it, for the guys which would pay anything to have a silent, high performance computer.
Posted on Reply
#23
W1zzard
I have no idea about pricing, but looking at it it just looks like a normal rad with a normal waterblock and a special coolant, which cant cost that much
Posted on Reply
#24
DeathtoGnomes
Special coolant? R-34? R-502?
Refrigerants used in window AC units or central air work well when under pressure. However without pressure and open to the atmostphere most refrigerants evaporate very, very rapidly. In a closed loop like this it can be contained and even have a bit of pressure to it, if the loop is strong enough.

The more refrigerant heats up the more it expands, if this loops heats up to much, the weakest link in the loop will break.

So its prolly safe to say the bulk of the R&D went into just developing the refrigerant.


Note:Some people might call refrigerant Freon, but Freon was a brand name and mostly associated with old R-12 originally.
Posted on Reply
#25
neliz
W1zzardI have no idea about pricing, but looking at it it just looks like a normal rad with a normal waterblock and a special coolant, which cant cost that much
As I spent some time at Rajintek as well, it will be very competitive with current AIO water coolers, so price won't be an issue.
Posted on Reply
Add your own comment
Apr 20th, 2024 11:20 EDT change timezone

New Forum Posts

Popular Reviews

Controversial News Posts