Thursday, January 19th 2017

Logitech's New Addition to Their Gaming Mice Line-up - The G203 Prodigy

by
Raevenlord
 Discuss (34 Comments)
In another addition to their gaming mice product range, Logitech has gone and left behind the complex, sometimes overly contoured designs of recent gaming mice in developing their new G203 Prodigy. The G203 does present a design that is closer to a neutral one, with no particular ergonomics considerations for either a left-handed or right-handed person (save for the pair of left-side thumb buttons). This thus increases the overall number of users whose natural hand posture may allow them to use this gaming mouse with more comfort, though it does mean the mouse makes some sacrifices in overall ergonomics.
Logitech is one of the few companies whose products tend to be vertically integrated, with Logitech developing its product designs, optical or laser sensors and other components in-house. This has translated into a prodigy of a gaming mouse based on one of the company's in-house-developed sensors with on-the-fly adjustable resolution (200-6000 DPI). The G203 also leverages an ARM processor which supports a USB report rate of up to 1000 Hz. The different buttons (as well as the RGB lighting, though it's more subdued and clean looking in this model than in other mice we've seen recently) on the G203 can be reprogrammed using Logitech's software suite, with button configuration being stored in the mouse and not on the PC.
IMpressive regarding the Logitech G203 Prodigy is its price: the company sells it for $39.99 in the U.S. and for €44.99 in the E.U., which does put it in a very positive light regarding some of its competitors.

Related News

Add your own comment

34 Comments on Logitech's New Addition to Their Gaming Mice Line-up - The G203 Prodigy

#1
ZoneDymo
yep...that sure is a mouse....exciting stuff.
Posted on Reply
#2
thesmokingman
? A cheaper version of the Pro? I don't get it?
Posted on Reply
#3
AsRock
TPU addict
Sad, so very sad. they should of made it a lefty mouse too. Or just made it a lefty mouse as they have enough right handed mouse's anyways.
Posted on Reply
#4
RejZoR
I don't understand why not a single mice vendor makes mouse bottom side dramatically raised from the gliding feet level. I'm using Goliathus mouse pad which is soft and all my mice keep on grinding with the belly on the pad surface. Sensor can be where it is because height matters, but the rest of the belly should be raised by 2-3mm. So that nothing of the mouse grinds against the pad.
Posted on Reply
#5
MxPhenom 216
ASIC Engineer
RejZoRI don't understand why not a single mice vendor makes mouse bottom side dramatically raised from the gliding feet level. I'm using Goliathus mouse pad which is soft and all my mice keep on grinding with the belly on the pad surface. Sensor can be where it is because height matters, but the rest of the belly should be raised by 2-3mm. So that nothing of the mouse grinds against the pad.
Depending on the sensor used, the mouse wouldnt work. Most competitive mice with optical pmw3310 and 3360 sensors have what is called 1 "dvd" lift off distance where at and after 1 dvd height from the pad it stops tracking. Dvds are about 1-2mm thick. Check out Rocket Jump Ninja's mice reviews on youtube and youll see what i mean.

Edit: i guess its not a pixart sensor like other logitech mice, but my point still stands.
Posted on Reply
#6
Tekelectric
It's basically going to be the US version of the G102 from Asia which is a cheaper version of the G Pro. Here's the link to the sensor tests www.overclock.net/t/1615853/g102-mercury-sensor-info

EDIT: I forgot OP said it already had an in house sensor, but go check out the tests, it seems like the sensor isn't too bad.
Posted on Reply
#7
RejZoR
MxPhenom 216Depending on the sensor used, the mouse wouldnt work. Most competitive mice with optical pmw3310 and 3360 sensors like this logitech one have what is called 1 "dvd" lift off distance where at and after 1 dvd height from the pad it stops tracking. Dvds are about 1-2mm thick. Check out Rocket Jump Ninja's mice reviews on youtube and youll see what i mean.
I've said everything that isn't a sensor or a glide pad should be lifted a lot more. And yet NO one does this. And all of the mice I've tried grind with entire belly on the surface of the mouse mat. It's especially bad with my G502 which has a textured belly.
Posted on Reply
#8
Tekelectric
RejZoRI've said everything that isn't a sensor or a glide pad should be lifted a lot more. And yet NO one does this. And all of the mice I've tried grind with entire belly on the surface of the mouse mat. It's especially bad with my G502 which has a textured belly.
I mean this mouse shouldn't have that problem since the only things that are making contact with the pad are the mouse feet. The rest of the bottom stays just above and doesn't touch anything else :)
Posted on Reply
#9
MxPhenom 216
ASIC Engineer
RejZoRI've said everything that isn't a sensor or a glide pad should be lifted a lot more. And yet NO one does this. And all of the mice I've tried grind with entire belly on the surface of the mouse mat. It's especially bad with my G502 which has a textured belly.
My Steelseries Rival 300 doesn't grind at all, and it is extremely quite on my corsair cloth pad.
Posted on Reply
#10
semantics
RejZoRI've said everything that isn't a sensor or a glide pad should be lifted a lot more. And yet NO one does this. And all of the mice I've tried grind with entire belly on the surface of the mouse mat. It's especially bad with my G502 which has a textured belly.
Your mouse pad is too thick and too soft it's flexing and creating an uneven surface to track on. Mice now of days are made to track on a hard flat surface the era of ball mouse styled mouse pads should have died out but people still use and design them like that. The funny part is some of those are "gaming surfaces".
Posted on Reply
#11
Tekelectric
semanticsYour mouse pad is too thick and too soft it's flexing and creating an uneven surface to track on. Mice now of days are made to track on a hard flat surface the era of ball mouse styled mouse pads should have died out but people still use and design them like that. The funny part is some of those are "gaming surfaces".
Well even so, it shouldn't even be problem with that mouse pad since I've tried it myself and it's nice to use. The G502 just has that inherent problem of textured plastic on the bottom. RejZoR could probably grab thicker mouse feet and see how that works out.
Posted on Reply
#12
thesmokingman
RejZoRI've said everything that isn't a sensor or a glide pad should be lifted a lot more. And yet NO one does this. And all of the mice I've tried grind with entire belly on the surface of the mouse mat. It's especially bad with my G502 which has a textured belly.
I've had that issue with my old 502 as well. I switched to the Pro during the xmas sales and find that it doesn't suffer from this problem. I used to use steel series pads but they wear out too fast and am now using ikross g70 pad, a knock on amazon. This pad is like the steelseries but firmer.
Posted on Reply
#13
sutyi
thesmokingmanI've had that issue with my old 502 as well. I switched to the Pro during the xmas sales and find that it doesn't suffer from this problem. I used to use steel series pads but they wear out too fast and am now using ikross g70 pad, a knock on amazon. This pad is like the steelseries but firmer.
What I found that I usually wear out cloth pads relatively fast sadly. I'm currently on a HyperX Skyn stuck on my desk. Doesn't move about, it won't unravel at the edges and it is easy to clean. Been on my desk two years now and still going strong.
Posted on Reply
#14
Tekelectric
sutyiWhat I found that I usually wear out cloth pads relatively fast sadly. I'm currently on a HyperX Skyn stuck on my desk. Doesn't move about, it won't unravel at the edges and it is easy to clean. Been on my desk two years now and still going strong.
Use a stitched edged mouse pad :D
Posted on Reply
#15
MxPhenom 216
ASIC Engineer
TekelectricUse a stitched edged mouse pad :D
Yeah I want a Zowie GSR mat being in the largest size they make.
Posted on Reply
#16
RejZoR
thesmokingmanI've had that issue with my old 502 as well. I switched to the Pro during the xmas sales and find that it doesn't suffer from this problem. I used to use steel series pads but they wear out too fast and am now using ikross g70 pad, a knock on amazon. This pad is like the steelseries but firmer.
I've had G3 before and it had the same issue. Belly grinding on the mouse mat.
Posted on Reply
#17
eidairaman1
The Exiled Airman
is it sturdier than a MX510 or 518?

If not- waste of time
Posted on Reply
#18
Vario
RejZoRI don't understand why not a single mice vendor makes mouse bottom side dramatically raised from the gliding feet level. I'm using Goliathus mouse pad which is soft and all my mice keep on grinding with the belly on the pad surface. Sensor can be where it is because height matters, but the rest of the belly should be raised by 2-3mm. So that nothing of the mouse grinds against the pad.
Stack another set of feet on the mouse, thats what I do.
Posted on Reply
#19
RejZoR
But then you also lift the sensor...
Posted on Reply
#20
Xzibit
thesmokingmanI've had that issue with my old 502 as well. I switched to the Pro during the xmas sales and find that it doesn't suffer from this problem. I used to use steel series pads but they wear out too fast and am now using ikross g70 pad, a knock on amazon. This pad is like the steelseries but firmer.
Never had that issue using SS soft mats and G3.

Maybe applying too much force because your excited during game play. Probably why the stiffer mat worked.

The only way i get that effect is if i concentrate force on the mouse / try'n to grind it into the pad.
Posted on Reply
#21
Readlight
This is inredible how expensive is PC componets in E.U vc dolars
If you by laptop this means you wil get expensive shit laptop.
Beter to be cautious on what you by.
In depo pc components loks cheaper.
Posted on Reply
#22
sutyi
TekelectricUse a stitched edged mouse pad :D
Had no luck with that either, although one might argue that I didn't exactly buy the highest possible quality from those.
Posted on Reply
#23
NeDix!
still the best offer is the G303 on blackfriday .. at 20-25USD
Posted on Reply
#24
Frick
Fishfaced Nincompoop
RejZoRI've said everything that isn't a sensor or a glide pad should be lifted a lot more. And yet NO one does this. And all of the mice I've tried grind with entire belly on the surface of the mouse mat. It's especially bad with my G502 which has a textured belly.
Intellimouse Explorer 3.0 masterrace suffer not those things, also with my rubber-with-cloth mousepad from the 90's.

I like this mouse actually. I fear it might be a bit too small, but those features are nice, for that price. When/if my Intellimouse Explorer dies and I can't find a new one for decent money I might take a look at this.
Posted on Reply
#25
RejZoR
I've actually filed the edges of my old G3 because it got so bad. And I've given it new gliding skates. I just don't get it why is it so hard to make the mouse "belly" arched everywhere but where gliding skates are (and the sensor). Or if they can make a sensor which allows slightly higher placement. The gliding smoothness would be so much better. I mean, I had to toss out all the weights from my G502 because belly itself is adding more resistance than I want. I like the silky smooth texture of clothed mouse mats opposed to cold and gritty feeling metal ones.
Posted on Reply
Add your own comment
Apr 19th, 2024 19:50 EDT change timezone

Latest GPU Drivers

New Forum Posts

Popular Reviews

Controversial News Posts