Friday, June 8th 2018

Noctua Reveals New Chromax CPU Coolers and Accessories

Noctua's Chromax line was introduced for hardware enthusiasts who don't dig the beige and tan color scheme on Noctua products. The Chromax family has grown over the years to include fans, heatsink covers, colored cables, and anti-vibration pads. Noctua has announced at Computex 2018 the addition of the NH-D15, NH-U12S, and NH-L9i CPU coolers to the Chromax line of products. Everything from the heatsink, fan, cables, and mounting parts will come in black. As usual, colored anti-vibration pads and heatsink covers will be available for consumers who desire to add some color to the CPU cooler. Additionally, Noctua also plans to expand the Chromax fan portfolio to include the NF-A20, NF-A14, NF-A12x25, NF-F12, NF-A9, and NF-A8 models.

We also got the opportunity to witness some of Noctua's latest accessories. First, there's the 24V to 12V DC-DC step-down converter which basically lets consumers run any Noctua 12V fan in 24V environments. The converter features support for PWM control and RPM monitoring. Nevertheless, it also allows voltage-based speed control since the output voltage scales with the input voltage. The nifty gadget supports fans up to 1A and operating temperatures up to 60°C. On another note, Noctua also showcased its eight channel PWM fan hub that allows users to control up to eight fans simultaneously. The hub draws power via a 4-pin PWM or SATA power cable. The rear side of the hub incorporates a magnet for easy installation on PC cases. One of the more peculiar accessories is the desk fan. With NF-A12x25 120 mm fan in the center, the prototype boasts a three-way Airflow Amplification System (AAS) which allegedly combines helix energy recovery, progressive ow acceleration, and Venturi-effect volume enhancement. The desk fan draws power from a USB port.
Add your own comment

35 Comments on Noctua Reveals New Chromax CPU Coolers and Accessories

#26
Xzibit
RejZoRSorry @Xzibit but that info is just pure BS. 6W ? BeQuiet specs for SW3 140HS say otherwise. It's 1.68W. Which is also supported with simple calculation of V*A=W. 12V*0.14A=1.68W. I really don't know where you got 6W.

www.bequiet.com/en/casefans/723
I was looking at the downloadable PDF they provide.

Downloads>Documents>Datasheets

12V*0.14A=1.68W
12V*0.5A=6W

Ask be quiet! to clarify what is start and what is max

Neweggs table for BL071
Input Power (W) = 6
Input Current (A) = 0.5



non-PWM



That's some elaborate BS. /s
Posted on Reply
#27
RejZoR
0.5A is a safety rating, not consumption. Current consumption is 0.14A. It literally says in the specs sheet. Official one, not some 3rd party shop like Newegg which always cock up specs and I don't trust anyone but manufacturer. I don't need to ask anyone, I just need to read the data which is right there, publicly accessible. Why is BeQuiet using an amperage safety rating on the back of the fan instead of actual one, I have no clue. You'll have to ask them. But they do specify ACTUAL consumption current and that's what's realistic. I literally see no physical reason why 2 fans of relatively similar specs would have over 3x difference in power consumption.

Posted on Reply
#28
Xzibit
RejZoR0.5A is a safety rating, not consumption. Current consumption is 0.14A. It literally says in the specs sheet. Official one, not some 3rd party shop like Newegg which always cock up specs and I don't trust anyone but manufacturer. I don't need to ask anyone, I just need to read the data which is right there, publicly accessible. Why is BeQuiet using an amperage safety rating on the back of the fan instead of actual one, I have no clue. You'll have to ask them. But they do specify ACTUAL consumption current and that's what's realistic. I literally see no physical reason why 2 fans of relatively similar specs would have over 3x difference in power consumption.
You do realize the video unboxing has those specs on the box as well @0:33. Your asking us not to believe be quiet! yet believe them ?
Posted on Reply
#30
Xzibit
RejZoRDude, can you even read?

www.bequiet.com/en/casefans/723

TECHNICAL DATA section. It's LITERALLY all there.
They are 2 possibilities.

Be Quiet! messed up on that spec sheet
Be Quiet!Version: 11/2016 We do not take responsibility for typographical errors. Similar image.
or
Be Quiet! messed up on all retail boxes and fan stickers. Not just this fan but their entire line up.
Posted on Reply
#31
RejZoR
What do you believe it's more plausible, basically same spec'd fan using over 3x more power than some other for no logical reason what so ever or a bad decision to print something on a box/back of the fan? This is logic and electrical basics. And it's not even a typo, they simply decided to print max current limit. Meaning this thing can be feed by half an amp and not fry for whatever reason. That doesn't mean it actually draws half an amp during normal operation.
Posted on Reply
#32
Xzibit
RejZoRWhat do you believe it's more plausible, basically same spec'd fan using over 3x more power than some other for no logical reason what so ever or a bad decision to print something on a box/back of the fan? This is logic and electrical basics. And it's not even a typo, they simply decided to print max current limit. Meaning this thing can be feed by half an amp and not fry for whatever reason. That doesn't mean it actually draws half an amp during normal operation.
I think someone should test all the popular fans out there to find out.
Posted on Reply
#33
VSG
Editor, Reviews & News
The current/power draw ratings are tested by a 3rd party agency, atleast if you are selling the fan in the USA, and is a worst case scenario of the highest measurement recorded during startup and operation. In most cases, the actual operating power draw is lesser than the number on the back but that remains the one to be followed when assigning fans to be powered off fan headers.
Posted on Reply
#34
EatingDirt
Simple fact is, Noctua's are great fans and are not overrated.

I'm using Chromax A-14's for myself, but I considered both the Be Quiet's & noiseblockers to replace my cases stock phantek's. Unfortunately, first I tried to cheap out and try my luck on some Arctic Bionix F140's first. They simply vibrated so much within my case, I couldn't stand to use them. So, eventually I ended up with Noctua's because they have a much lower dba rating at max specified RPM than either the Be Quiet & Noiseblocker.

From personal experience, the only noise I hear up to 1,100 rpm is air and I rarely have the need to run them over that speed.
Posted on Reply
#35
CrAsHnBuRnXp
Holy hell! The fans arent shit colored brown!
Posted on Reply
Add your own comment
May 3rd, 2024 23:52 EDT change timezone

New Forum Posts

Popular Reviews

Controversial News Posts