Wednesday, October 27th 2021
Most of Gigabyte's Intel Z690 Motherboards Only Features Two Audio Jacks
Although we're going to try and cover all the newly launched Intel Z690 based motherboards more thoroughly before the retail availability date, we had a quick look already on what's on offer and we were struck by something rather odd when it comes to Gigabyte, most of their new boards only have two 3.5 mm audio jacks around the back. This is not limited to their cheaper SKUs, but is found through the entire product stack.
We're not entirely sure what's going on here and will check with Gigabyte once someone is awake that we can talk to about it, but we're fairly certain that this is going to cause a bit of a backlash from their customers. This was actually something we kind of saw in the leaked image of one of the Aero boards, as it didn't look like it had any audio jacks at all, but that wasn't the case. Instead, it seems to have something to do with Gigabyte's move away from the Realtek ALC1220 Intel HD audio based codecs that the company have been using for the past few generations of boards.We first spotted this on the Z690I Aorus Ultra, a Mini-ITX board and didn't think too much of it, as Mini-ITX boards often have more limited audio ports. However, it turns out that everything from the fairly entry level Z690 Gaming X all the way up to the Z690 Aorus Xtreme has had their ports cut back, although there are models in between that still feature some variant of the ALC1220 audio codec. Most of the boards appear to feature the ALC4080, something we've already seen on some ASUS motherboards, although ASUS offers a full complement of ports on their boards. It should be noted that the ALC408x is a USB audio codec and as such doesn't appear to be Intel HD audio compliant, if it matters.Some boards only have two 3.5 mm jacks as mentioned, whereas others also have an optical S/PDIF jack, but this can apparently not be used at the same time as the 3.5 mm jack and we're not sure if this requires you to unplug the 3.5 mm jack to use the S/PDIF interface. At least all of these boards sport a front panel audio header, but there are a couple of boards that make this whole change even more confusing. The first one is the Aero G, which in addition to the ALC4080 features an old and quite frankly poor quality ALC897 Intel HD codec for the front panel audio header. We really don't understand why, as this is a huge downgrade even from the ALC1220.Finally we have the Z690 Aorus Xtreme, which does away with Realtek altogether, in favour of an ESS ES9280AC USB DAC and a pair of ESS ES9080 DAC's on top of that, all of which sits on a daughter card at the rear I/O. However, this board doesn't appear to have any kind of front audio connector. We'd also expect more than a couple of 3.5 mm audio jacks and an optical S/PDIF out with a setup like this, but apparently that's all we get. What's more, the Z690 Aorus Xtreme comes with an additional "ESSential" USB DAC that could be used for front audio, but which seems kind of wasted considering the high-end audio that the board already sports. We really don't follow Gigabyte's logic here and although it's nice to see some better quality audio solutions being used, we have a feeling a lot of people will want more than two audio jacks on their motherboard. We should also mention that none of Gigabyte's competitors offer a similar cut-back on audio jacks.
Source:
Gigabyte
We're not entirely sure what's going on here and will check with Gigabyte once someone is awake that we can talk to about it, but we're fairly certain that this is going to cause a bit of a backlash from their customers. This was actually something we kind of saw in the leaked image of one of the Aero boards, as it didn't look like it had any audio jacks at all, but that wasn't the case. Instead, it seems to have something to do with Gigabyte's move away from the Realtek ALC1220 Intel HD audio based codecs that the company have been using for the past few generations of boards.We first spotted this on the Z690I Aorus Ultra, a Mini-ITX board and didn't think too much of it, as Mini-ITX boards often have more limited audio ports. However, it turns out that everything from the fairly entry level Z690 Gaming X all the way up to the Z690 Aorus Xtreme has had their ports cut back, although there are models in between that still feature some variant of the ALC1220 audio codec. Most of the boards appear to feature the ALC4080, something we've already seen on some ASUS motherboards, although ASUS offers a full complement of ports on their boards. It should be noted that the ALC408x is a USB audio codec and as such doesn't appear to be Intel HD audio compliant, if it matters.Some boards only have two 3.5 mm jacks as mentioned, whereas others also have an optical S/PDIF jack, but this can apparently not be used at the same time as the 3.5 mm jack and we're not sure if this requires you to unplug the 3.5 mm jack to use the S/PDIF interface. At least all of these boards sport a front panel audio header, but there are a couple of boards that make this whole change even more confusing. The first one is the Aero G, which in addition to the ALC4080 features an old and quite frankly poor quality ALC897 Intel HD codec for the front panel audio header. We really don't understand why, as this is a huge downgrade even from the ALC1220.Finally we have the Z690 Aorus Xtreme, which does away with Realtek altogether, in favour of an ESS ES9280AC USB DAC and a pair of ESS ES9080 DAC's on top of that, all of which sits on a daughter card at the rear I/O. However, this board doesn't appear to have any kind of front audio connector. We'd also expect more than a couple of 3.5 mm audio jacks and an optical S/PDIF out with a setup like this, but apparently that's all we get. What's more, the Z690 Aorus Xtreme comes with an additional "ESSential" USB DAC that could be used for front audio, but which seems kind of wasted considering the high-end audio that the board already sports. We really don't follow Gigabyte's logic here and although it's nice to see some better quality audio solutions being used, we have a feeling a lot of people will want more than two audio jacks on their motherboard. We should also mention that none of Gigabyte's competitors offer a similar cut-back on audio jacks.





74 Comments on Most of Gigabyte's Intel Z690 Motherboards Only Features Two Audio Jacks
Separating devices into discrete parts has many advantages, there is an old saying in the country I was born in which roughly translates to "if it does everything, it does nothing well".
As for me, I need integrated Wi-Fi as I can't drill holes into the walls of my rented apartment to pull cables through, and I'd rather not use a crappy USB dongle if possible.
Same with audio. Quality motherboards nowadays offer EMI shielding and decent enough audio codecs for everyday use. You need expensive sound gear to hear the difference anyway, which I don't have.
I know that saying, which I mostly agree with (I still use an MP3 player and a compact camera up to this day), but premium motherboards have come a long way in the last 10-15 years.
The boss decides and then everyone do as they're told. Focus groups, market research etc. is just not a thing. Sales might ask some of the distributors what they think and feed that back during a meeting, but that's usually about as much feedback as there is. Brainstorming in Taiwan is a room full of people agreeing with the boss, telling the boss how great his or her ideas are. This is why so few companies in Taiwan listen to feedback from end users as well, or even media for that matter. Over the years that I worked as a tech journalist, I managed to convince one company to implement a single feature. Everyone else just nodded, said thank you and forgot about it, until a competitor did it or at least did something similar.You can't rip it out any more, as CNVi modules aren't really something you can add to boards that lack them, since the connector isn't there.
In as much as you and I and most likely a lot of people here at TPU prefer to use wired networking, it's simply not always possible to do so and the PCIe or CNVi modules are a lot better than the USB equivalent product, so I have no issue that this is becoming a standard feature.Yeah, that was my last Creative product as well. My first was a Soundblaster 2.0 ISA card.
Just curious what's sparked the change; I hope the PC industry isn't going to try and copy Apple and kill the 3.5mm jack. You can prise my ancient HD580s from my cold, dead hands.
Why does everyone think that Creative will support products forever?
Yeah, people got upset at the lack of driver support then, and never got over it
They did slowly add support, but at the time it was a messy BSOD ridden era of confusion
I was complaining about the lack of driver support from Creative, and your counter-argument is that it's okay because DanielK wrote drivers when Creative failed to do so?Also, the X-Fi was the current-gen when all this happened. Don't try and straw-man that, it makes you look bad.
Keep your silly insults to yourself and stop reacting with your pride. But I digress, we're off-topic.
Not to take part of the battle, but I have to say that someone's custom drivers aren't really a valid argument against a lack of official driver support. Equally, a lot of people used Omega drivers for ATi graphics cards as a lightweight (and sometimes faster) equivalent to ATi's own Catalyst packages. Still, I wouldn't include Omega in ATi's list of merits.
Why are you being pedantic about spelling now, anyway? What does that bring to the thread, exactly?Creative were the last of the major audio companies to get drivers out, by several months. It's not as if the November RTM launch was a surprise - many others managed to sort their drivers during the beta and release candidates. Creative failed to do this themselves, and then missed the hard launch of a new OS by about 5 months on top of that.
DanielK's drivers provided basic compatibility, but he was not affiliated with Creative, and you cannot credit Creative for his work. To make that clear, the downloads page has "This software/driver pack is unofficial, not supported by Creative Labs. Use it at your own risk." at the top of every post.
He only started releasing his drivers in the first place because Creative failed so hard to deliver anything at all during the beta and release candidate. The fact his drivers existed at all is evidence that there was a need to do so - adding further proof that Creative were not providing satisfactory support of their own products.
AlsoSo yeah..
So, get back on topic. If you wish to discuss another topic... start a thread in the appropriate forum.
Stop the bickering and insults:
Posting in a threadAnd,
Hello, I have a Gigabyte Z790 Master MB and love it! However, it only has mic and line IO as well as a SPDF out. I was frustrated at first because I still have a 7.1 Soundblaster speaker setup that I wanted to use. So, for a fix and better audio than what the MB produces anyhow...I bought and installed a Creative Sound BlasterX AE 5 Plus Sound Card. Cost was about $110 and yes there are Windows 11 drivers for it and installed easily. Does it work well? The answer is yes and I highly recommend!