Tuesday, May 17th 2022

NVIDIA RTX 4090 "Ada" Founders Edition Cooler Spied, Retains Dual-Axial Flow-Through Design

In what is a sign that the July 2022 rumored debut of NVIDIA GeForce RTX 4090 "Ada Lovelace" graphics card is on track; the first spy pictures of its Founders Edition cooler surfaced on ChipHell forums. The cooler appears to be an evolution of the Dual-Axial Flow-Through cooling architecture NVIDIA debuted with the RTX 30-series "Ampere" Founders Edition cards, where air is drawn in from one end of the card, flows through the cooling solution that's a series of aluminium fin-stacks skewered by a series of heatpipes; and ventilated through the back of the card, with a second fan in "pull" configuration.

From the looks of it, the aluminium fins on the RTX 4090 Founders Edition cooler appears to have a dark-grey matte finish, which could indicate some form of ceramic surface-treatment that improves heat-dissipation; while the cooler's base making primary contact with the GPU and memory chips, appears to be a vapor-chamber plate with a nickel-plated copper surface. From the location and sizes of the thermal pads for the memory chips, we guess that the GPU is surrounded by 10 memory chips, which could indicate a 320-bit memory interface, making this card a possible successor to the original RTX 3080. The cooler itself is more than 2 slots thick, and appears to be as thick as the RTX 3090 FE cooler.
Sources: ChipHell, Wccftech, VideoCardz
Add your own comment

31 Comments on NVIDIA RTX 4090 "Ada" Founders Edition Cooler Spied, Retains Dual-Axial Flow-Through Design

#26
Assimilator
DeathtoGnomesJ.F.C.

Guess the mini crowd will be crying about that. :cry:
The mini crowd will ALWAYS be crying about something.
ymbajaGetting close to the point where the the gpu will simply be the entire case an you’ll bolt on your meager add-on components such as a motherboard and cpu..
Considering that today's GPUs are quite literally more complex than every other part of a system combined...
Posted on Reply
#27
HisDivineOrder
It will be amazing if it comes out in July. That'll be a real sign that AMD is going to show up with a real threat AND/OR that they are pricing this above what currently exists. Imagine slotting in this above the $2k for the 3090 Ti.
Posted on Reply
#28
80251
ChomiqNah, better to use a riser and dremel with 70% of gpu sticking out the side of the case :D
That would keep the card cool and the case!
Posted on Reply
#29
Tomorrow
dgianstefaniI think the FE design is very tasteful and aesthetic. Many people do. I am surprised though they didn't really change it in the new generation, normally it's updated.
I hope this is a joke. The whole 12pin connector hanging in the middle of the board in plain view ruins any aesthetic it might have displayed on a shelf.
Plus it's a nightmare to take apart and service (GN found like 70+ screws and glue). Not to mention cleaning those individual nooks and crannies of dust is a pain in the ass.

FE only looks good taken out of the package or displayed on a shelf. In real world use where cleaning and servicing is nessessary it's about as anti-repair and annoying as Apple's products. It just seems it was designed by designers to looks good in a render not by engineers to be functional in a case.
Posted on Reply
#30
PapaTaipei
TiggerThe only reason they have to have such stupid sized coolers on GPUs now is they just can't stop making them consume such idiotic amounts of power. Whatever GPU I use, I will always put a water block on it instead of one of these massive lumps in my case spewing 400+ watts of heat into the case.

Tasteful :laugh:
Question: how do you cool all the board? Doesn't water blocks only cool the GPU chip? I heard way back this was the issue with wb.
Posted on Reply
#31
WhitetailAni
PapaTaipeiQuestion: how do you cool all the board? Doesn't water blocks only cool the GPU chip? I heard way back this was the issue with wb.
Waterblocks now contact both the GPU core, VRMs, memory, and everything else that could need cooling.
Old ones were GPU core only, and so you got little heatsinks and some thermal paste and stuck them on the RAM and VRMs etc, then pointed a fan at it.
Posted on Reply
Add your own comment
Nov 17th, 2026 21:06 CST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts