Monday, July 7th 2025

AMD Ryzen 9 9950X Prices Slashed by a Third Over MSRP, Drops to $434

AMD Ryzen 9 9950X 16-core/32-thread processor powered by the "Zen 5" microarchitecture saw its price on Amazon Prime reduced to $434. This implies a 33% reduction over the chip's launch MSRP of $649. At this price, the chip ends up around $100 cheaper than the Intel Core Ultra 9 285K. Our testing shows that the 9950X beats the 285K in productivity workloads, and matches it in 4K Ultra HD gaming. The 9950X was AMD's flagship desktop processor until it was supplanted by the Ryzen 9 9950X3D, which sells for roughly $700 owing to its gaming performance that's second only to the Ryzen 7 9800X3D, while retaining productivity performance comparable to the 9950X. The Ryzen 9 9950X is a 16-core/32-thread part with two 8-core CCDs, each with 32 MB of on-die L3 cache. The processor ticks at 4.30 GHz base, with a maximum boost frequency of 5.70 GHz, and a TDP of 170 W.
Source: VideoCardz
Add your own comment

89 Comments on AMD Ryzen 9 9950X Prices Slashed by a Third Over MSRP, Drops to $434

#76
A Computer Guy
Vayra86To fetch a better price ...

so you can buy MOAR hardware of course!
I struggle with this now. It might have been cheaper to be a stamp collector but 3950x, 5950x, 7950x are in my collection now. I learned my lesson after getting the 3800x at launch so I wait for the price drops. Currently patiently waiting for 9950x to dip below $400.
freeagentAnd Zen 6 is coming, and you know the best CPU's come from the first run.. dammit!
You may be on to something there. The first stepping 5950x I got from ebay is a bit better than the first one I bought after the big price drop to $550 after release from $799.
Posted on Reply
#77
Vayra86
A Computer GuyI struggle with this now. It might have been cheaper to be a stamp collector but 3950x, 5950x, 7950x are in my collection now. I learned my lesson after getting the 3800x at launch so I wait for the price drops. Currently patiently waiting for 9950x to dip below $400.

You may be on to something there. The first stepping 5950x I got from ebay is a bit better than the first one I bought after the big price drop to $550 after release from $799.
I've learned to wait, and every time I didn't have any more patience, I overspent by a good margin. The latest, rare, example is my 7900XT. Could've had a 9070XT now for 200 less. Then again I understand the feels, the urge, the yolo moment you have when you just click buy...
Posted on Reply
#78
freeagent
A Computer GuyYou may be on to something there. The first stepping 5950x I got from ebay is a bit better than the first one I bought after the big price drop to $550 after release from $799.
All of my Zen 3 parts are first run, or close to it.. and they are stronger than most people's that show their results. Some are better though, and that bugs me :)

My 9900X is pretty decent, cant do 6600 1:1 though. 6400 at 2200 is what I normally run.

Edit:

Maybe it can do 6600.. I should relax my timings a bit and try again..

Edit again:

I noticed this trend with Intel like 15 years ago.. not sure if it is the same with them since they had their recent scandal..
Posted on Reply
#79
Vayra86
freeagentAll of my Zen 3 parts are first run, or close to it.. and they are stronger than most people's that show their results. Some are better though, and that bugs me :)

My 9900X is pretty decent, cant do 6600 1:1 though. 6400 at 2200 is what I normally run.

Edit:

Maybe it can do 6600.. I should relax my timings a bit and try again..
So deep down in your mind, you want to buy yourself into a top spot. Its a bit like cheating in online games isn't it :D
Posted on Reply
#80
freeagent
Vayra86So deep down in your mind, you want to buy yourself into a top spot.
Maybe :D
Vayra86Its a bit like cheating in online games isn't it :D
Not really.. I just exploit what it can do that's all :D
Posted on Reply
#81
A Computer Guy
freeagentAll of my Zen 3 parts are first run, or close to it.. and they are stronger than most people's that show their results. Some are better though, and that bugs me :)

My 9900X is pretty decent, cant do 6600 1:1 though. 6400 at 2200 is what I normally run.
Do the Zen5 chips have a better shot at 6400? My prior understanding for Zen4 was 6000 is the sweet spot, 6200 can be problematic, 6400 was difficult.
Posted on Reply
#82
freeagent
A Computer GuyDo the Zen5 chips have a better shot at 6400? My prior understanding for Zen4 was 6000 is the sweet spot, 6200 can be problematic, 6400 was difficult.
I am not sure, I only have one :D

But mine did 6200 no problem, 6400 didn't take much work, but 6600 is a bit tough. I would have to relax timings a bit, and probably run 1.3 VSOC. Also my VDDG's could have probably used a bump. I will try again later..
Posted on Reply
#83
wolf
Better Than Native
I don't want to derail the thread, and I want this to remain respectful so please don't take this as antagonizing but I want to try address this/add a point of view with the aim that we can all continue to improve this long running situation.
RedwoodzYou must be young. The people you call AMD fanboys have a much longer memory than yours. They remember the decades of AMD trolling on every tech site in the industry, inc. reviewers.
Does it happening in the past excuse anyone from doing it today? This feels akin to trying to break generational cycles like generational trauma, and we should all be striving to be the best versions of ourselves and break those cycles, be better than the people who did it to us, lest the cycle continue. Having copped it a decade or two ago doesn't feel like much of a justification to do it to people who never did it to you. I don't mean you specifically in this instance, I mean generally for anyone.
RedwoodzTeam Blue did WAAAY more hate bashing than you have ever experienced going the other way.
This comes across as an assumption on your part about their experience, which you have no way to truly know. You might be right, but you also might not which is why I try stay away from that kind of speculation.
RedwoodzPeople with long memories and the basic understanding that monopolies are very bad for tech know that you have to root for the underdog to succeed and support them when you can.
I certainly do, and from my perspective they do too, we want AMD to succeed and support them by purchasing their products when they're the right product for our need at the time, and recommending them to friends, family etc when we believe it's the right product for them too, I don't believe that means willingly buying products we believe will be worse for meeting that need, just to support the underdog. But to each their own, I can appreciate some are willing to weight that aspect with some significance when making purchases.

In this instance I believe that notion (supporting the underdog) is somewhat decoupled from what they're saying about toxic fandom/comments, and that toxic fandom can achieve the opposite of the desired effect (where the underdog attracts more fans and customers), by putting people off a given company or product/range by association with those undesirable traits/people/comments.
Posted on Reply
#84
JustBenching
DavenThen just stop and look at yourself as an example of why Nvidia and I guess Intel too don't always have the best product in all cases.
Intel, for sure, they don't have the best product for every scenario. AMD is better in a lot of scenarios actually. Overall id say they are both neck and neck in the desktop space, with AMD having better gaming out of the box solutions and Intel having a lot more MT performance at the mid / high range segment. But in GPUs it's more black and white, there isn't anything that amd is really better at - especially with RDNA 4 ( RDNA 3 at least offered more vram?). They can only compete in price - which means they do have the inferior product. If you are not a fan of the company, there is nothing compelling about amd gpus unless they are cheaper. An AMD gpu is an option if it's cheaper, if it's not cheaper it's not an option - I don't know why this is a contestable point.
Posted on Reply
#85
_roman_
Hecate91Did the socket frame lower temps at all? The only reason I have seen to use one is to keep the thermal paste mess off the gaps in the IHS.
Edit- I didn't consider a offset bracket before, that may be worth doing for an OC but I personally don't want to remove a socket mechanism.
the noctua offset brackets which i used on am4 does not change anything in the shown cpu frequency in /proc/cpuinfo while compiling. Heavy workload in the gnu userspace.
e.g. ryzen 5800x @ noctua nh-d15 chrom... black
the picture below also show the noctua offset brackets. For some reason the noctua nh-d15 stock fans are much loader as the be quiet dark rock pro 5 fans. Not a measurement!

I somehow managed to get thermal paste to the wrong spot even with that aftermarket socket.
I had for years on the graphic card dram chips on my previous asus g75vw notebook also the non conductive thermal paste. It happens, just leave it untouched.


I switched my mainboard after 2 years. There is less thermal paste at teh wrong spots at my ryzen 7600x.




Before - old mainboard.
previous asus mainboard. I already put back the asus oem cpu mounting brackets. The thermal paste was between cpu and the red cpuframe. I's not a seal.
For myself applying thermal paste is easier.




Some people use spatula to make a slim thermal paste surface. I did it this time the first time.
Note: not in the pictures.
Posted on Reply
#86
Redwoodz
wolfI don't want to derail the thread, and I want this to remain respectful so please don't take this as antagonizing but I want to try address this/add a point of view with the aim that we can all continue to improve this long running situation.

Does it happening in the past excuse anyone from doing it today? This feels akin to trying to break generational cycles like generational trauma, and we should all be striving to be the best versions of ourselves and break those cycles, be better than the people who did it to us, lest the cycle continue. Having copped it a decade or two ago doesn't feel like much of a justification to do it to people who never did it to you. I don't mean you specifically in this instance, I mean generally for anyone.

This comes across as an assumption on your part about their experience, which you have no way to truly know. You might be right, but you also might not which is why I try stay away from that kind of speculation.

I certainly do, and from my perspective they do too, we want AMD to succeed and support them by purchasing their products when they're the right product for our need at the time, and recommending them to friends, family etc when we believe it's the right product for them too, I don't believe that means willingly buying products we believe will be worse for meeting that need, just to support the underdog. But to each their own, I can appreciate some are willing to weight that aspect with some significance when making purchases.

In this instance I believe that notion (supporting the underdog) is somewhat decoupled from what they're saying about toxic fandom/comments, and that toxic fandom can achieve the opposite of the desired effect (where the underdog attracts more fans and customers), by putting people off a given company or product/range by association with those undesirable traits/people/comments.
I agree, wrong is wrong no matter who is doing it. That's also why you won't find a single post of me critisizing anyone's choice of hardware. That's why I resist people trying to alter others choices. I just point out when someone else is.
Posted on Reply
#87
Doctor Who
Chrispy_What makes you think AM6 will be any better? AM5's "problems" are the result of maintaining compatibility and that's something AMD strive for. If you want a disposable platform that breaks compatibility every generation or two, look to Intel.

As for AM5's "problems", the thick IHS makes cooling aggressive overclocks harder, but the most popular SKUs are pulling 162W at most, many of them default to 87W. Perhaps if you're trying a hefty PBO+ profile on a 9950X or 9950X3D then you'll grow to resent the IHS but it seems to be fine even for 9950X at stock settings (230W PPT) even with an affordable air cooler on it. Yes, it throttles but that just means that after 10 minutes of boosting at 5.4GHz it's running at 5.35GHz. If you really want that infinite duration max boost at 230W to get the extra 1-2% more performance, just buy a bigger cooler that can definitely handle the load.

Everyone ought to know that the efficiency nosedives and performance gains are on very diminishing returns by the point you're pushing AM5 above 200W. Just spend 10 minutes tuning an undervolt with curve modifier and get 5.5GHz performance at 180W. Heck, Ryzen Master will even do it automatically for you on a per-core basis. Click a button, walk away, and come back an hour later to some settings that you can plug into the BIOS and forget about.
Everything you said has nothing to do with me asking a question about AM6 not being LGA compliant or something. I am all for compatibility, AMDs done a fantastic job sticking with one socket for several years. There's no question AM5 platform has experienced more widespread problems, especially when it was initially launched in comparison to AM4. So we all hope that AM6 will have a similar launch as AM4 has had.
igormpNo, LGA allows to have more pins in the same area.
Clearly Intel mastered LGA where as AMD has had issues with their 1st introduction of it within its AM5 platform.
AMD has had a lot more luck with PGA.
Posted on Reply
#88
blinnbanir
Super XPEverything you said has nothing to do with me asking a question about AM6 not being LGA compliant or something. I am all for compatibility, AMDs done a fantastic job sticking with one socket for several years. There's no question AM5 platform has experienced more widespread problems, especially when it was initially launched in comparison to AM4. So we all hope that AM6 will have a similar launch as AM4 has had.


Clearly Intel mastered LGA where as AMD has had issues with their 1st introduction of it within its AM5 platform.
AMD has had a lot more luck with PGA.
Um Threadripper boards were LGA and that was years ago. Pin count is the reality.
Posted on Reply
#89
Chrispy_
Super XPEverything you said has nothing to do with me asking a question about AM6 not being LGA compliant or something. I am all for compatibility, AMDs done a fantastic job sticking with one socket for several years. There's no question AM5 platform has experienced more widespread problems, especially when it was initially launched in comparison to AM4. So we all hope that AM6 will have a similar launch as AM4 has had.
You said AM5 had it's fair share of problems, and I'm just pointing out that AM6 might not fix those problems because some of AM5's problems were a direct result of maintaining compatibility with AM4 coolers. As for the AGESA updates, late OS optimisations, and lower TDPs hampering performance of things like the vanilla 9900 and 9700X, some of that was true at AM4's launch too. I'm not overly concerned with a couple of rough months that get Microsoft/AGESA updates - it's software that gets patched over time. The solution is to avoid being an early adopter if you don't want to pay full asking price for a slightly unfinished platform... ;)

I'm only guessing, but I suspect you're right in that AMD will continue to offer backwards-compatibility with AM4 coolers, meaning yet another very thick IHS. It's problematic, but only for a tiny fraction of enthusiasts.
Posted on Reply
Add your own comment
Nov 21st, 2026 14:50 PST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts