Friday, June 19th 2026

Thermal Grizzly New Duronaut Pro and Hydronaut Pro Now Available

Compared to their non-pro variants, Duronaut Pro and Hydronaut Pro offer increased thermal conductivity while otherwise meeting the specific requirements of their predecessors. Duronaut Pro was developed for particularly high long-term stability, while Hydronaut Pro can be used as a thermal paste in industrial systems thanks to its silicone-free carrier structure.

At first glance, the temperature differences measured under laboratory conditions between the Pro pastes and the non-pro variants appear marginal. However, when considering how little room for improvement still exists in thermal paste development with regard to temperature, these improvements in thermal conductivity must be considered significant.
In the following graphics, thermal conductivity is given as the temperature difference (delta Kelvin) between the heat source (30 x 30 mm contact surface, 240 watts heat flow) and the cooler (contact pressure: 300 N force (48 PSI)). The lower the value, the better the thermal conductivity. Specifying the temperature delta while taking contact pressure into account is a more accurate comparison method for thermal pastes than stating thermal conductivity in watts per meter and Kelvin (W/(m × K)).

The following video shows in detail how we test our thermal paste and which factors influence the thermal conductivity of a thermal paste:

Here is an overview of the thermal conductivity of all Thermal Grizzly thermal pastes:
Duronaut Pro
Duronaut Pro is a high-end thermal paste whose development focused not only on optimized thermal conductivity compared to Duronaut, but also on particularly high long-term stability. The name "Duronaut" is derived from the English term "durability." This exceptionally high long-term stability is achieved through a specially developed silicone oil as well as the combination of aluminium micropowder and zinc oxide nanopowder in different forms.

The optimized particle shape and size minimize the so-called pump-out effect and ensure excellent adhesion of the paste to the surface. This results in an extremely low thermal contact resistance. The optimized particle shapes and sizes also make it possible to apply Duronaut Pro in a very thin layer, which additionally ensures excellent adhesion of the paste to the surface. This results in an extremely low thermal contact resistance. The minimal layer thickness during application, combined with the high conductivity of the aluminium micropowder and zinc oxide nanopowder mixture, enables very efficient heat transfer between the heat source, such as a CPU, and the cooler.

Features:
  • Extreme long-term stability
  • Excellent thermal conductivity
  • Electrically non-conductive
  • No curing
Hydronaut Pro
Hydronaut Pro can be used as a thermal paste in industrial systems thanks to its silicone-free carrier structure. In many thermal pastes, silicone-based oils, such as siloxanes, are used as the carrier fluid or as part of the matrix. Under thermal stress, especially during temperature changes, changes can occur in the paste, such as bleeding and the displacement of the paste from the contact zone. Repeated temperature fluctuations as well as micro-movements between the CPU IHS and the cooler base can intensify this effect. The mechanical displacement of the paste from the contact surface is referred to as the pump-out effect.

In normal PC use, this is generally uncritical. In industrial applications, however, escaping silicone-based oil may be undesirable, especially if adjacent materials or sealing materials, such as certain EPDM or NBR seals, are incompatible with silicone oils. This can lead to swelling or changes in the material properties. The product is RoHS-compliant and designed as an easy-to-apply thermal interface medium for demanding users.

Features:
  • Suitable for industrial applications
  • Outstanding thermal conductivity
  • No curing silicone-free
  • Electrically non-conductive
Source: Thermal Grizzly
Add your own comment

10 Comments on Thermal Grizzly New Duronaut Pro and Hydronaut Pro Now Available

#1
vbq7qK68eyYAH4iR
Mere Mortal
Given newer products, like the Carbice pad, it seems there is a real market for long term TIM products.

If TPU is interested, I'd be willing to chip in and partially fund a test between products like Carbice, Duronaut/Duronaut Pro, Kryosheet and PTM7950.

It really seems like there is value in finding out if these products, which are marketed as long term solutions, are actually long term solutions.

Each of the products above approach the issue of long term TIM stability in different ways and also come at very different price points.

I'm keen to find some answers, if TPU is!
Posted on Reply
#2
A&P211
I currently use the Kryosheet on 2 laptops, an asus x13 and msi Victor 16. X13 with a amd 7940hs, 4060, the msi with 275hx and 5080.

The x13 didn't have much improvement with the thermals but the msi did. I did notice that both laptop's temperatures don't spike up so fast. I used heat resistant tape around the cpu and gpu core as a barrier.
Posted on Reply
#3
L'Eliminateur
vbq7qK68eyYAH4iRGiven newer products, like the Carbice pad, it seems there is a real market for long term TIM products.

If TPU is interested, I'd be willing to chip in and partially fund a test between products like Carbice, Duronaut/Duronaut Pro, Kryosheet and PTM7950.

It really seems like there is value in finding out if these products, which are marketed as long term solutions, are actually long term solutions.

Each of the products above approach the issue of long term TIM stability in different ways and also come at very different price points.

I'm keen to find some answers, if TPU is!
i'd love to see a real long term test, but it would be quit a grueling test as you'd need an exact same system for all tests at the same time:
script a poweron/poweroff and load/unload to simulate a daily sequence and gaming/browsing/idling usage for a year and every month do a thermal test. And you probably can't speed it up, because for the daily power cycle you need to make sure the entire system cools down to ambient temperature equilibirum, maybe you could shave some hours -probably after 3 hours it would reach equilibirum on a 25c conditioned room-, but it would still take several months of a 6 exact computers doing nothing.

And that's only if you test a single manufcturer, it you want to test amd and intel then you'd have to double everything, VERY expensive
Posted on Reply
#4
Grimling
vbq7qK68eyYAH4iRGiven newer products, like the Carbice pad, it seems there is a real market for long term TIM products.

If TPU is interested, I'd be willing to chip in and partially fund a test between products like Carbice, Duronaut/Duronaut Pro, Kryosheet and PTM7950.

It really seems like there is value in finding out if these products, which are marketed as long term solutions, are actually long term solutions.

Each of the products above approach the issue of long term TIM stability in different ways and also come at very different price points.

I'm keen to find some answers, if TPU is!
Most tests in regards of TIM are done in just hours, or Days.
That is just not producing reliable results. Because you GPU may perform well for 2 weeks, but then the pumpout effect causes higher temps until after some months, the card is no longer usable and TIM must be replaced.
So we need long-time tests on hardware, that is known to cause problems over time (like some ASUS RTX40 GPUs).
Only then we know if Duronaut is actually durable.
Posted on Reply
#5
RejZoR
Impressive to shave away half a degree for already top of the line results of the regular version. I've bought Duronaut some time ago for graphic card where Kryonaut wasn't suitable because of pumpout. It got outdated before I could use it again on something else lol. But it's still very good so I'll just keep on using it, it's gonna be fine.
Posted on Reply
#6
sephiroth117
I am using the normal duronaut and quite happy with it

I replaced old paste with it but the consistency is here and the temps, especially idle, really dropped well above my expectations

Time will tell how durable it is for me but for now duronaut is my go to paste

PS: very important to spread the paste slowly with the provided spatula
Posted on Reply
#7
Razor512
I would like to see some testing comparing it to shorter lasting pastes such as NT-H2. It would also be good to see testing in laptops, especially thinner ones which use lower mounting pressure heatsinks, and are the most challenging for thermal pastes to handle due to rapid pump out issues.
Posted on Reply
#9
Grimling
A true service life cannot be derived from these indicators. Controlled temperature cycles with repeated measurements of BLT, thermal resistance, and material distribution are required for that. I cannot yet fully verify the claim of exceptionally high long-term stability based on the single measurement available here and without days of TTV measurements, but it already does not look bad. - Igor from Igors Lab
Igor is honest enough to tell us, that he can not make any final conclusions regarding the claim of high long-term stability that Thermal Grizzly makes. And that is why i said:
GrimlingSo we need long-time tests on hardware, that is known to cause problems over time
Posted on Reply
#10
KLiKzg
Kryonaut was used before, got pumped out after a year or two. Not satisfied at all with it!

Not going to change from MX-6, which is not showing degradation from 24/7 work & after a year.
Posted on Reply
Nov 17th, 2026 13:14 CST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts