Tuesday, November 17th 2026

Acer Extends Nitro Series with Two 34-Inch Ultrawide Curved Gaming Monitors

Acer has expanded its Nitro gaming monitor lineup with two 34-inch ultrawide curved models: Nitro ED340CKRP and ED340CKRJ. Both use a 1500R VA matte anti-glare panel with Dynamic Frequency and Resolution (DFR). In the 5120 x 2160 mode, the refresh rates are up to 180 Hz on the ED340CKRP and 120 Hz on the ED340CKRJ. In the 2560 x 1080 mode, refresh rates goes up to 360 Hz and 240 Hz, respectively. Both models also support AMD FreeSync Premium. Acer lists typical contrast ratios of 3,300:1 for the ED340CKRP and 3,000:1 for the ED340CKRJ. Brightness is rated at 250 nits, and both displays support HDR10 and 90% DCI-P3 coverage.

Response times differ between the models. The ED340CKRJ is rated with 1 ms VRB (Visual Response Boost), while the ED340CKRP is listed with 1 ms GTG and 0.5 ms minimum. Connectivity includes two HDMI 2.1 ports, one DisplayPort 1.4 input, and a headphone jack. Both monitors also have built-in 2 W stereo speakers and a tilt-adjustable stand. Acer lists the Nitro ED340CKRP in Japan for ¥99,980 (around $627), and the ED340CKRJ for ¥69,800 (around $438). The company has not provided international pricing or availability.
Sources: Hermitage Akihabara, Acer Nitro ED340CKRP, Nitro ED340CKRJ
Add your own comment

10 Comments on Acer Extends Nitro Series with Two 34-Inch Ultrawide Curved Gaming Monitors

#1
Prima.Vera
Will never buy Acer again ever.
Their building quality is the worst of the worst. The Predator letters from the brand, half of them fell down, the edge of the screen are getting loose due to extremely poor gluing, bleeding the white light on the corners.
But the worst thing is, if the monitor sits in a cooler or colder room, when it starts, there are extreme screen horizontal lines, all over the screen, especially lower part; (like on old CRT), due to faulty capacitors or similar, and will only recover after the monitor warms up completelly.

Really garbage products.
Posted on Reply
#2
mwbreur
I have the same with Samsung so it's not just 1 brand.
1 dead pixel line top to bottom on my 34" Samsung and both 27" show the lines blurry image when turning on from standby which is caps related...

It's not just Acer..
Posted on Reply
#3
kazuviking
mwbreurI have the same with Samsung so it's not just 1 brand.
1 dead pixel line top to bottom on my 34" Samsung and both 27" show the lines blurry image when turning on from standby which is caps related...

It's not just Acer..
You can guess who makes the panel for acer if it have the same issue.
Posted on Reply
#4
InhaleOblivion
Prima.VeraWill never buy Acer again ever.
Their building quality is the worst of the worst. The Predator letters from the brand, half of them fell down, the edge of the screen are getting loose due to extremely poor gluing, bleeding the white light on the corners.
But the worst thing is, if the monitor sits in a cooler or colder room, when it starts, there are extreme screen horizontal lines, all over the screen, especially lower part; (like on old CRT), due to faulty capacitors or similar, and will only recover after the monitor warms up completelly.

Really garbage products.
Appreciate the heads on the quality issues with the newer Acer monitors.
Posted on Reply
#5
Athena
Prima.VeraWill never buy Acer again ever.
Their building quality is the worst of the worst. The Predator letters from the brand, half of them fell down, the edge of the screen are getting loose due to extremely poor gluing, bleeding the white light on the corners.
But the worst thing is, if the monitor sits in a cooler or colder room, when it starts, there are extreme screen horizontal lines, all over the screen, especially lower part; (like on old CRT), due to faulty capacitors or similar, and will only recover after the monitor warms up completelly.

Really garbage products.
The same could be said of pretty much any budget monitor, could it not?

They use the cheapest components to get to the price point that consumers want in that class of mointor
The more expensive monitors use higher quality parts (well, most of the time), but they cost a lot more, and they are usually backed with a good warranty
Posted on Reply
#6
evernessince
Prima.VeraWill never buy Acer again ever.
Their building quality is the worst of the worst. The Predator letters from the brand, half of them fell down, the edge of the screen are getting loose due to extremely poor gluing, bleeding the white light on the corners.
But the worst thing is, if the monitor sits in a cooler or colder room, when it starts, there are extreme screen horizontal lines, all over the screen, especially lower part; (like on old CRT), due to faulty capacitors or similar, and will only recover after the monitor warms up completelly.

Really garbage products.
I've had Acer monitors for the last 15 years and had zero issues. I think you just got unlucky.

I've seen friends have the most issues with MSI. Monitor lasts a year, develops banding, gets replaced, develops banding.

I had nothing but issues with the Dell monitors, had to have an ultrasharp replaced 5 times. That said, the issue was cross-hatching and the monitor was still functional.
Posted on Reply
#7
kazuviking
AthenaThe same could be said of pretty much any budget monitor, could it not?
Philips is different in that regard. They do a lot of trickle down tech and make really good bare minimum versions with not utter dogshit build quality. Their EVNIA app only using 32mb of ram in the background and doesn't phones home every day.
evernessinceI've seen friends have the most issues with MSI.
There is a reason they are called Multiple Serious Issues.
Posted on Reply
#8
evernessince
kazuvikingThere is a reason they are called Multiple Serious Issues.
Reminds me of OCZ. They were cheap but you definitely paid for it, I had 12 returns on one of their mice. MSI at least is better then that. Biostar too I remember was pretty bad, have had one of their boards in a long long time.
Posted on Reply
#9
_roman_
I'm looking for a monitor. The 250 nits (350 or more required) and curved are a no go. I do not even need to look further. 600 nits on the tablet, smartphone and on the smartwatch is quite often too dark.

Regarding the ACER quality. Acer screens which were older at work, tehy did their job. Notebooks were cheap quality.
Except the no post issue sometimes, always on blue predator logo, i do not see build quality issues wiht my acer predator bifrost radeon 9070 oc. The cooler is from cooler master and that's most likely the reason teh build quality is decent, just the firmware sucks.

Feel free to share your thoughts on the screen. Basically i could buy no screen when i just go for the brand names on geizhals.
Posted on Reply
#10
Prima.Vera
AthenaThe same could be said of pretty much any budget monitor, could it not?

They use the cheapest components to get to the price point that consumers want in that class of mointor
The more expensive monitors use higher quality parts (well, most of the time), but they cost a lot more, and they are usually backed with a good warranty
When I bought the X34 wasn't cheap at all, definitely not a budget monitor.
I know prices in Japan are ridiculous and callously overpriced, but still...
Posted on Reply
Nov 18th, 2026 21:24 PST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts