• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
  • The forums have been upgraded with support for dark mode. By default it will follow the setting on your system/browser. You may override it by scrolling to the end of the page and clicking the gears icon.

Your PC ATM

brandonwh64 said:
I just used Prime95 cause it generates the most heat. linX doesnt do a good job. i believe InteBurnTest is the best
Click to expand...

Are you using custom settings? For me LinX creates more heat. Though, there is a bug in it and depending on certain voltages you will get low heat output but your GFlop output will be lower given different amounts of memory used. You just have to change the amount of memory used to resolve this.
 
eidairaman1 said:
500 Watt Antec Neo HE that is almost 4 Years Old now. Still working hard.
Click to expand...

little Hiper typeR 580 for me been going strong for a couple of years now before that i had an Raidmax modular 520 for about 5 years it' still going with some new caps installed in my mates PC
 
sorry for the camera quility on some shots

my new PC ATM :D

img5722y.jpg

img5723p.jpg

img5724a.jpg

img5725e.jpg

img5727r.jpg

img5728o.jpg
 
Looks good :toast:

So how nice is that corsair cooler? Seems really popular and I'm wondering if it would be a worthy replacement for my modded coolit eliminator or if it would just be about the same.
 
speaking of tempreatures its not bad, around 25c idle for me on stock cpu. havent really checked any overclocking on the rig yet. the only problem id say is putting the pump thing onto the cpu its abit flimsy the way its connected to the socket

i dont think there will be any need to upgrade to it the coolit would prob have the same temps

also would it be better if i flip the rad upside down?
 
IINexusII said:
speaking of tempreatures its not bad, around 25c idle for me on stock cpu. havent really checked any overclocking on the rig yet. the only problem id say is putting the pump thing onto the cpu its abit flimsy the way its connected to the socket

i dont think there will be any need to upgrade to it the coolit would prob have the same temps

also would it be better if i flip the rad upside down?
Click to expand...
Oh, I never noticed that's where the pump was, I guess I just never thought about it :laugh:

I have no idea about flipping the rad; I pretty much don't know crap about loops.
 
IINexusII said:
speaking of tempreatures its not bad, around 25c idle for me on stock cpu. havent really checked any overclocking on the rig yet. the only problem id say is putting the pump thing onto the cpu its abit flimsy the way its connected to the socket

i dont think there will be any need to upgrade to it the coolit would prob have the same temps

also would it be better if i flip the rad upside down?
Click to expand...

Difference would be minimal, and if I'd be nitpicking about it, the current setup would be best as the heat rises into the rad instead of being directly pumped back out.

But that would probably not even be a degree difference there, especially over time when the loops temperature levels out.
 
just a bit of testing before one goes in the "Hers" rig.....

DSC02877.jpg
 
I can't see the picture because of how aswesome it looks!

Or, it could be because of a work filter :ohwell:

Ether way, I know it looks sex! :rockout:
 
jesus, that is just beautiful peet!
 
alot cleaner looking
S5031133.jpg
 
That looks nice, but one question: Why don't you have heatspreaders on your ram?
 
DDR3's dont get as hot as ddr2 afaik,
 
But heatspreaders look sexy!
 
Oh hai guys.

008.jpg
 
I don't need pictures to say mine looks like crap. Runs like crap. Need upgrade asap. lol
 
mines sexy. :)

and no heat spreaders??? nooooo!
 
LOL. naked and HOT!!!!
 
You must log in or register to reply here.
Back
Top