- Joined
- Sep 25, 2011
- Messages
- 1,770 (0.38/day)
- Location
- Cussing desert
System Name | Torquey Vulture |
---|---|
Processor | Ryzen 5 2600 |
Motherboard | Gigabyte B450 MiniITX |
Cooling | DDC water loop, EK block |
Memory | 16GB Patriot Viper RGB |
Video Card(s) | EVGA 1070 |
Storage | 500gb NVME; some Phat HDDs |
Display(s) | Achieva Shimian 27" 2560x1440 |
Case | Thermaltake V1 MiniITX |
Power Supply | EVGA supernova 850 G2 |
Mouse | Corsair Harpoon |
Keyboard | Possibly the cheapest you can buy. Shift key broke recently. Space sounds like I'm kicking a ham |
Software | Windows 10 |
Hey dinky, I've been overclocking and benching for like 2 days nonstop after I checked out hwbot when you linked to it. But I can't get my 8350 stable in any bench beyond 5ghz. It's kinda driving me insane. I'm wondering tho if it has something to do with memory issues. I'm gonna borrow some from a friend (they're actually my old ripjaws) because I have some Ripjaws x 1600 that I've done everything with they've seen disgusting amounts of voltage getting stable near 2000 lol. Timings werent even horrible for $30 ram; And I have some Kingston hyperx Predators 2666, but I can only run them at 2400 because I can't move my fsb without major instability, which is also weird cuz I used to be able to run it at 275 no problem. Idk if they're bad or what the deal is, because sometimes they seem great and other days I can't boot with them. I've run them with memtest86 several times, and sometimes they pass just fine and other times they throw like 10 errors in the first pass.
Point number B: I have an unsettling dilemma where the water in my loop is disappearing. It just started like a week ago, but over the course of a few days it'll drop like a 1/4 inch. I first noticed it cuz I was hearing bubbles getting sucked through, so I topped it off. Then like a day or 2 later, more bubbles. Thankfully no water is spewing out anywhere, that I can tell. I have the sides off and it seems good. Could it be evaporating from getting hot in all the benching? Water temp has gotten as high as 35 c when I forgot to turn my fans up lol
Point number B: I have an unsettling dilemma where the water in my loop is disappearing. It just started like a week ago, but over the course of a few days it'll drop like a 1/4 inch. I first noticed it cuz I was hearing bubbles getting sucked through, so I topped it off. Then like a day or 2 later, more bubbles. Thankfully no water is spewing out anywhere, that I can tell. I have the sides off and it seems good. Could it be evaporating from getting hot in all the benching? Water temp has gotten as high as 35 c when I forgot to turn my fans up lol