Ryzen DRAM Calculator by 1usmus

[R3jn1971]

1.45v is perfectly fine. DDR4 does not get very hot.

do we currently have a 1: 1 divider with infinity fabric ?? cpu z shows me 3:56 and timing is 1867 and infinity fabric 1867 so it should be 1: 1 which is the best option for ryzen

 

[Tomorrow]

do we currently have a 1: 1 divider with infinity fabric ?? cpu z shows me 3:56 and timing is 1867 and infinity fabric 1867 so it should be 1: 1 which is the best option for ryzen

Yes you are using 1:1. Best option is to test latency with AIDA64. If it's under 70ns then it's defenetly 1:1. If it's 80ns or more then it is not 1:1

CPU-Z shows old value based on FSB. FSB is no longer used and was used in Intel s775 motherboards a decade ago. No sure why CPU-Z still shows this.

 

[R3jn1971]

Yes you are using 1:1. Best option is to test latency with AIDA64. If it's under 70ns then it's defenetly 1:1. If it's 80ns or more then it is not 1:1

CPU-Z shows old value based on FSB. FSB is no longer used and was used in Intel s775 motherboards a decade ago. No sure why CPU-Z still shows this.

My Aida 64 benchmark results

 

[Tomorrow]

Looks good. Very similar to mine. Not suprising considering we use the same memory kit.

 

[R3jn1971]

Looks good. Very similar to mine. Not suprising considering we use the same memory kit.

I wanted to thank you very much, you helped me a lot because I have never heard of j-die memories apparently this is something new because nowhere is information about them and as you can see they are better than c-die thank you very much

 

[Tomorrow]

My pleasure. This was my first encounter with J-Die but so far im very happy with the performance. Especially fo the price.
Some have suggested that J-Die might be the successor to C-Die or just a better binned version of it.

 

[R3jn1971]

If you had any newer, better settings for these memories, let me know when I have free time, maybe I can try to get something out of them

 

[Zach_01]

Im using 1.45v. These are the settings DRAM Calculator recommends. The performance i get currently and the actual settings from BIOS. Hope this helps.

From what I'm seeing in BIOS pics you haven't set all the available settings from RyzenDRAMCalc... A lot are on auto. May be you can achieve I little better performance and/or latency if you do.
Still very nice results as is.

 

[Tomorrow]

The BIOS shows more settings than the calculator suggests. So those that the calculator does not suggest i've left at auto mostly. There are a few that the calculator did suggest but since they are worse than the auto settings i did not set them.

 

[Zach_01]

Dont asume that because the suggestion it's worst than auto it will definately hurt performance. The end result is just a combination of settings. All timings are kind of related to each other. More or less related, depends.
I'm just saying give it a try and see, thats all.

 

[phanbuey]

Dont asume that because the suggestion it's worst than auto it will definately hurt performance. The end result is just a combination of settings. All timings are kind of related to each other. More or less related, depends.
I'm just saying give it a try and see, thats all.

Especially for sub-timings this is true. That's what makes them such a B*CH to overclock; you have to trial and error them.,

 

[Deleted member 185158]

Yes you are using 1:1. Best option is to test latency with AIDA64. If it's under 70ns then it's defenetly 1:1. If it's 80ns or more then it is not 1:1

CPU-Z shows old value based on FSB. FSB is no longer used and was used in Intel s775 motherboards a decade ago. No sure why CPU-Z still shows this.

It's still a "bus" frequency, the name had just changed through out the years. Reference clock is pretty popular, but likely look silly on Cpu-z. They could change it to BCLK perhaps, which is just "Base clock" and that would fit nicely on the cpu-z.
Never the less, it all means the same thing....

 

[mestregroda]

Is it a bug? Latest version 1.6.2 "coming soon" message, when hitting fastest button.
Using Corsair Vengeance LPX: CMK16GX4M2D3600C
Micron 8Gb B-Die (20 nm) / 1 die
1024M x64 (1 rank)

Using Gigabyte x570 Ultra
32gb (4 x 8Gb)

 

[TheLostSwede]

My Aida 64 benchmark results

A tip for screenshots, Alt+Prt Scr (print screen, top right on the keyboard) while having a window active (as in click on it) and then you can just to CTRL+V in a post here and it'll upload automatically.

Is it a bug? Latest version 1.6.2 "coming soon" message, when hitting fastest button.
Using Corsair Vengeance LPX: CMK16GX4M2D3600C
Micron 8Gb B-Die (20 nm) / 1 die
1024M x64 (1 rank)

Using Gigabyte x570 Ultra
32gb (4 x 8Gb)

Not a bug, he's simply not added all types of options into the current release. Extreme or even Fast isn't available for most memory types on top of that.

 

[Chomiq]

A tip for screenshots, CTRL+Prt Scr (print screen, top right on the keyboard) while having a window active (as in click on it) and then you can just to CTRL+V in a post here and it'll upload automatically.

It's Alt+Prt Scr over here.

 

[Zach_01]

Actually both working if you paste it somewhere that accepts it.
Ctrl+Prt Scr and paste (Ctrl+V)
Alt+Prt Scr and paste (Ctrl+V)
...and if you want to keep it
WinKey+Alt+Prt Scr goes straight to folder "Videos > Captures"
Dont remember if I created the Capture folder tho...

 

[TheLostSwede]

It's Alt+Prt Scr over here.

You're correct. Fixed.

Actually both working if you paste it somewhere that accepts it.
Ctrl+Prt Scr and paste (Ctrl+V)
Alt+Prt Scr and paste (Ctrl+V)
...and if you want to keep it
WinKey+Alt+Prt Scr goes straight to folder "Videos > Captures"
Dont remember if I created the Capture folder tho...

Ctrl+Prt Scr doesn't take a screen shot of only the active program though.
WinKey+Alt+Prt Scr seems to trunkate some content though, as in you don't get the entire window. Try with CrystalDiskMark for example.

 

[Zach_01]

Is it only at my keyboard that both combos work then?

 

[TheLostSwede]

Is it only at my keyboard that both combos work then?

Ctrl+Prt Scr for me takes the active screen, i.e. if you have two screens and hit Prt Scr, it takes the entire desktop, whereas holding down Ctrl limits it to one screen and Alt is the active window/program.

 

[R3jn1971]

Heloo eweryone my new timings score J-die memory

i go search to 16-18-18--36-1t

 

[mstenholm]

Heloo eweryone my new timings score J-die memory


i go search to 16-18-18--36-1t

You are now three days and nine post in being a member and I'm sure that somebody already asked you to fill out your System Specs. You get no response if people have to guess what RAM you have from other than old grumpy farts like me.

 

[R3jn1971]

Sorry, I will complete everything tomorrow

 

[Space Lynx]

Is my ram running IF 1:1? for full specs see under my profile pic. I think it is, but I remember reading somewhere 3733 was the max, yet my B-Die under ryzen calculator is fully stable at 3800 fclk 1900

 

[TheoneandonlyMrK]

Is my ram running IF 1:1? for full specs see under my profile pic. I think it is, but I remember reading somewhere 3733 was the max, yet my B-Die under ryzen calculator is fully stable at 3800 fclk 1900

You would have to have set the infinity fabric speed beyond 1800 since it is supposed to auto divide after that but your NB clock says it's working at memory clocks?!, It didn't work like that for me , i can do those clocks but i have to setup the infinity fabric manually.

 

[Space Lynx]

You would have to have set the infinity fabric speed beyond 1800 since it is supposed to auto divide after that but your NB clock says it's working at memory clocks?!, It didn't work like that for me , i can do those clocks but i have to setup the infinity fabric manually.

My mobo has been doing it automatically right on the NB clocks for everything I put in it 3600 and under, and this is what Ryzen Calc told me to put, I did all the sub timings manually too just as it said to do, and MSI BIOS latest 1.04 BIOS seems to be doing the IF 1:1 automatically for me.

so do I need to change anything or not? I am pretty sure I am running 1:1, I gained like 1000 points in Final Fantasy XV benchmark coming from xmp 3200 cas 14, no other variables changed.

or should I go into BIOS and manually change the FCLK to 1933 or something?