System Name | Hp Omen 15 2019 |
---|---|
Processor | i7-9750H |
Motherboard | Intel Cannon Point HM370, Intel Coffee Lake-H |
Cooling | HP THERMAL MODULE N18E G2 |
Memory | SK hynix HMA81GS6JJR8N-VK x2 |
Video Card(s) | nVIDIA GeForce RTX 2070 with Max-Q Design (HP) |
Storage | Intel Optane H10 |
Display(s) | AUO82ED |
Audio Device(s) | SPDIF Interface (FiiO USB DAC-E10) |
Power Supply | 200w |
Ok some good and some bad news:
I changed OCC to performance mode and rebooted and afterwards there was no more pl1 throttling during Cinebench 20. I also reached 2986 points.
BUT my CPU was thermal throttling basically from the beginning till end and stayed at 97 degrees all the time. I will post my setup, maybe you can see why this happens?
My Laptop is on a stand so there is air circulation etc.
that's really good progress !!
well, all that I can think of is a poor thermal paste application from the factory, but I think that you have done your best to manage the throttling.
System Name | Hp Omen 15 2019 |
---|---|
Processor | i7-9750H |
Motherboard | Intel Cannon Point HM370, Intel Coffee Lake-H |
Cooling | HP THERMAL MODULE N18E G2 |
Memory | SK hynix HMA81GS6JJR8N-VK x2 |
Video Card(s) | nVIDIA GeForce RTX 2070 with Max-Q Design (HP) |
Storage | Intel Optane H10 |
Display(s) | AUO82ED |
Audio Device(s) | SPDIF Interface (FiiO USB DAC-E10) |
Power Supply | 200w |
Yeah it's probably bad thermal paste application. Is it worth doing that? it will void warranty, right?
System Name | Hp Omen 15 2019 |
---|---|
Processor | i7-9750H |
Motherboard | Intel Cannon Point HM370, Intel Coffee Lake-H |
Cooling | HP THERMAL MODULE N18E G2 |
Memory | SK hynix HMA81GS6JJR8N-VK x2 |
Video Card(s) | nVIDIA GeForce RTX 2070 with Max-Q Design (HP) |
Storage | Intel Optane H10 |
Display(s) | AUO82ED |
Audio Device(s) | SPDIF Interface (FiiO USB DAC-E10) |
Power Supply | 200w |
Ok I have never done repasting. I have to remove a lot of components to get to the CPU and GPU right? Would you go for Arctic MX-4 or Noctua NT-H2?
that's really good progress !!
well, all that I can think of is a poor thermal paste application from the factory, but I think that you have done your best to manage the throttling.
System Name | Hp Omen 15 2019 |
---|---|
Processor | i7-9750H |
Motherboard | Intel Cannon Point HM370, Intel Coffee Lake-H |
Cooling | HP THERMAL MODULE N18E G2 |
Memory | SK hynix HMA81GS6JJR8N-VK x2 |
Video Card(s) | nVIDIA GeForce RTX 2070 with Max-Q Design (HP) |
Storage | Intel Optane H10 |
Display(s) | AUO82ED |
Audio Device(s) | SPDIF Interface (FiiO USB DAC-E10) |
Power Supply | 200w |
So I ended up RMAing my Laptop and since it's back the heat problems are gone! They replaced the cooling parts and now I also reach about 3085 on Cinebench without any throttling and the temperature never gets past 70-75° during the benchmark!
System Name | Hp Omen 15 2019 |
---|---|
Processor | i7-9750H |
Motherboard | Intel Cannon Point HM370, Intel Coffee Lake-H |
Cooling | HP THERMAL MODULE N18E G2 |
Memory | SK hynix HMA81GS6JJR8N-VK x2 |
Video Card(s) | nVIDIA GeForce RTX 2070 with Max-Q Design (HP) |
Storage | Intel Optane H10 |
Display(s) | AUO82ED |
Audio Device(s) | SPDIF Interface (FiiO USB DAC-E10) |
Power Supply | 200w |
System Name | Hp Omen 15 2019 |
---|---|
Processor | i7-9750H |
Motherboard | Intel Cannon Point HM370, Intel Coffee Lake-H |
Cooling | HP THERMAL MODULE N18E G2 |
Memory | SK hynix HMA81GS6JJR8N-VK x2 |
Video Card(s) | nVIDIA GeForce RTX 2070 with Max-Q Design (HP) |
Storage | Intel Optane H10 |
Display(s) | AUO82ED |
Audio Device(s) | SPDIF Interface (FiiO USB DAC-E10) |
Power Supply | 200w |
If you exit ThrottleStop, you can monitor your CPU voltages with HWiNFO. That will show you if the new HP utility is working correctly. If it is using the XTU libraries, it might have the same limitations where the voltages might not be restored correctly after a sleep resume cycle.
Good to see major manufacturers taking enthusiasts a little more seriously. Another user recently showed me an HP laptop with a heatsink that could actually keep the CPU cores at a reasonable temperature. Amazing!
System Name | Hp Omen 15 2019 |
---|---|
Processor | i7-9750H |
Motherboard | Intel Cannon Point HM370, Intel Coffee Lake-H |
Cooling | HP THERMAL MODULE N18E G2 |
Memory | SK hynix HMA81GS6JJR8N-VK x2 |
Video Card(s) | nVIDIA GeForce RTX 2070 with Max-Q Design (HP) |
Storage | Intel Optane H10 |
Display(s) | AUO82ED |
Audio Device(s) | SPDIF Interface (FiiO USB DAC-E10) |
Power Supply | 200w |
Some computers might not reset the CPU voltage registers during a reboot. Best to hold the Shift key down and select Shut down from the Windows menu to do a full shutdown. The new HP app might have picked up the previous settings from the CPU and is just using those. Will it allow you to adjust the core and cache voltages individually?
System Name | Hp Omen 15 2019 |
---|---|
Processor | i7-9750H |
Motherboard | Intel Cannon Point HM370, Intel Coffee Lake-H |
Cooling | HP THERMAL MODULE N18E G2 |
Memory | SK hynix HMA81GS6JJR8N-VK x2 |
Video Card(s) | nVIDIA GeForce RTX 2070 with Max-Q Design (HP) |
Storage | Intel Optane H10 |
Display(s) | AUO82ED |
Audio Device(s) | SPDIF Interface (FiiO USB DAC-E10) |
Power Supply | 200w |