Your PC ATM

[SN2716057]

A bit envious of the 600s, tbh. My G500a has the top vent holes in the middle. Which means only 30mm thick rads fit there, thicker hit the heatsinks/memory.

edit and ps: I wonder if the top panel can be swapped for the 600s?

 

[Deleted member 223428]

I have the same case for my main rig- really nice! Solid side panel also, didn't want a TG panel in my main rig

The P600s was the only case I found that was able to retire my Silverstone FT-01B ... which I used for nearly 12 years!

I've been really happy with it. My only complaint has nothing to do with the case itself - it's just probably bigger than I need. Mine sits under the desk area so the solid panel works out well - less likely to take critical damage if I accidentally kick it.

I used an Antec Three Hundred from 2011-2020. That poor thing really didn't have any wire management space and through the years I had it crammed full with various card combos in Crossfire and SLI. Sure wasn't pretty to look at inside.

A bit envious of the 600s, tbh. My G500a has the top vent holes in the middle. Which means only 30mm thick rads fit there, thicker hit the heatsinks/memory.

edit and ps: I wonder if the top panel can be swapped for the 600s?

It looks like it might

 

[Vario]

Upgrades, always upgrades. Adding 140mm fans to the front so I can use my MNPCTech fan grills. One 120mms they are too close together to fit .
Finally getting some carbon fiber in the build. So far just the one piece, put it fits and looks great.View attachment 281255View attachment 281256View attachment 281257

I like the grills, very old school. Get some UT99 on that machine.

 

[avidgamer121]

Running stock nowadays (newer hardware) mostly means running higher, totally overkill voltages.

i don't think i need to worry about as my temps are totally fine

 

[Vario]

A bit envious of the 600s, tbh. My G500a has the top vent holes in the middle. Which means only 30mm thick rads fit there, thicker hit the heatsinks/memory.

edit and ps: I wonder if the top panel can be swapped for the 600s?

Can you use thin fans so you can use a thicker radiator, such as the Noctua NF-A12x15? I have three of these fans and the performance is nearly the same as any other high end silent 120x25mm, but very thin!

 

[Valentine]

Might change back to my Meshify 2 when I get a new motherboard.

 

[Ruru]

Took those front fans from my 2nd rig and put 2x bq! PWM fans to it as I put watercooling to it so it needed some PWM fans.

 

[WhiteNoise]

Currently

 

[Ruru]

Currently

View attachment 281759

Noice, yet that must be a nightmare to keep totally clean (as seen on the side panel)?

 

[WhiteNoise]

@Kissamies I'll have you know, that yer right....now I'm going to take the panel off and clean it.

 

[Ruru]

@Kissamies I'll have you know, that yer right....now I'm going to take the panel off and clean it.

Microfiber cloth and that stuff I use to clean my glasses is my secret weapon for cleaning TV/monitors and case side panels

 

[jallenlabs]

And done. For now. Er... this week anyway.

 

[WhiteNoise]

Looks like someone else could use a window cleaning, huh @Kissamies

 

[Ruru]

And done. For now. Er... this week anyway.
View attachment 281779

The side panel would love to have some love from a microfiber cloth..

 

[Fangio1951]

Nothing sexier than copper on copper.
BTW people I'm sorry for the bad image quality. My phone cam is ruined.

hi m8,

If you like copper, what do u think of this ??

 

[jallenlabs]

The side panel would love to have some love from a microfiber cloth..

Agreed. Freaking finger print magnet. When I take some more serious pics, its will get a full cleaning. Maybe this weekend, I dunno.

 

[Ruru]

hi m8,

If you like copper, what do u think of this ??View attachment 281791

Feels weird that I call copper sexy but here we are

 

[Valentine]

https://imgur.com/a/Jd4Po64

I took a chance at this for $130 Cad. I was planning on buying a refurbished Maximus XII for $340 Cad.

Ultimately I still prefer the Asus board since it has passively cooled vrms but of course the massive discount sways me into the MSI board. Yet to check if the damn thing actually works because it only came in today; if it does, then I'll keep it over the Maximus.

 

[Ruru]

Sandy

 

[DR4G00N]

New gpu upgrade, Instinct MI25/WX 9100 16GB to replace my old 780 Ti sli setup. (Imagine there's also a GTX 1050 in the second pcie slot, I was too lazy to grab another pic).

 

[Vario]

New gpu upgrade, Instinct MI25/WX 9100 16GB to replace my old 780 Ti sli setup. (Imagine there's also a GTX 1050 in the second pcie slot, I was too lazy to grab another pic).

View attachment 281794View attachment 281795

Looks nice, the empty 5.25 bays would be a great spot to stick a 120mm fan. That is a monster power supply.

 

[tabascosauz]

Slowly banishing all traces of gamer branding and RGB, still waiting on the Cablemod 12VHPWR

 

[freeagent]

Looks great!

Nice GPU.. it doesn't look too thick at all

 

[Veseleil]

banishing all traces of gamer branding and RGB

Please banish that WD sticker as well.

 

[freeagent]

Please banish that WD sticker as well.

I didn't want to say it

I try to supportive most of the time