• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

ATI Catalyst 9.4 Released

That was only an inf compare... if you edit the inf to add your card you _might_ be able to use the new drivers.
 
I dont have a X2 card but I do run crossfire, and had code error on 9.1 or 9.2 cant remeber wich one it was, but anyhow It was a Microsoft Visal C++ problem wich the x64 version from the microsoft website fixed the problem. So try update that, and hope it works for you
 
Bucknuts77 said:
I dont have a X2 card but I do run crossfire, and had code error on 9.1 or 9.2 cant remeber wich one it was, but anyhow It was a Microsoft Visal C++ problem wich the x64 version from the microsoft website fixed the problem. So try update that, and hope it works for you
Click to expand...

thats rather interesting. can you please find a link to that software, for people with the issue?
 
AVIVO h264 playback has been working fine. You dont need the package either for playback, its in the regular drivers. On top of that the AVIVO never has magicly worked on its own. It has always depended on the media players to support it.
 
GUYS. I came onto something big. Hit the test custom clocks button in the overdrive menu... :D
 
Thats was one of the biggest features in this release is that they have fixed the overdrive feature.
 
alexp999 said:
Thats was one of the biggest features in this release is that they have fixed the overdrive feature.
Click to expand...

not overdrive, the test custom clocks. tis a fullscreen 3D tester now.
 
Its all part of the same feature add surely.

Test custom clocks is in the Overdrive section, no?
 
Yay, Far Cry 2 resolutions are working for me now :D
I can select other resolutions other than the 2 obscure resolutions.
Now to test 1080p works in dx10 (i doubt it though, it switches down to 1080i).
 
Gzero said:
Yay, Far Cry 2 resolutions are working for me now :D
I can select other resolutions other than the 2 obscure resolutions.
Now to test 1080p works in dx10 (i doubt it though, it switches down to 1080i).
Click to expand...

The fix for that is to add "HDTV" resolutions at 30, 50, and 60Hz.
Its odd, but it works. its on the AMD forums.
 
Hope this driver is gona give me some performance in crossfire now or if my gpu is still stuck at max 40% each
 
Mussels said:
The fix for that is to add "HDTV" resolutions at 30, 50, and 60Hz.
Its odd, but it works. its on the AMD forums.
Click to expand...

Sorry I'm not sure what that means, where do I add it?

CCC looks fine to me, all the settings are good.

I was manually forcing 1680x1050 through shortcuts, but obviously that doesn't work for 1080p.

Does this fix work for DMC4 as well?
 
Mussels said:
not overdrive, the test custom clocks. tis a fullscreen 3D tester now.
Click to expand...

Overdrive looks like that too now. I tried it out and it seems to have found the real sweetspot for my 4850. Instead of 660/993 it is now 690/1103. Hopefully that's where I can keep it.

If you run overdrive get ready to get trippy. I stared at that psychedelic screen for around 20 minutes :twitch: It plays some crazy tricks on your eyes.
 
MopeyMartian said:
Overdrive looks like that too now. I tried it out and it seems to have found the real sweetspot for my 4850. Instead of 660/993 it is now 690/1103. Hopefully that's where I can keep it.

If you run overdrive get ready to get trippy. I stared at that psychedelic screen for around 20 minutes :twitch: It plays some crazy tricks on your eyes.
Click to expand...

Grats on that i tryed OC in crossfire mode catalyst says its ok but pc crashes after about 30 min or so plying have no idear what to do enymore no oc for me in CF mode
 
9.4 Hotfix AGP ... are available too :)

Got them , but i run a virus scan on the system , so i will delay a bit installation and testing .

XP drivers are 38 megs ... not that compact size , after all this old cards removal .

8.11 = 35.5 Mb
8.12 = 34.5
9.2 = 36.6
9.3 = 36.7
9.4 = 38.6
 
After some playing around my conclusion is that Catalyst 9.4 SUCK. Furmark on min/max and average FPS took a heavy hit, average dropping 7FPS, max dropping 11FPS, and min dropping 5-8FPS (forget exactly). Catalyst 9.2 perform very well, although some may find the CCC will not run, easy fix, just use the CCC for 9.3.
 
I cant even get the overdrive menu to work on this install with my 4850 on vista x64 it's all greyed out :(
 
On Windows XP 32 .. the Hotfix install, got well .

The only drastic change that I noticed, was that SmartGart registers it self silently ...
No more pop up , that CCC will test AGP compatibility , and get enabled.

Auto-tune , has nothing as 3D graphic test , just the ordinary panel .

So far so good .
 
9.4's installed flawlessly! Everything so far is working good...I see no gains nor losses with these drivers as of yet....
 
Looks like AVIVO Converter is NOT AVAILABLE as of yet for Vista 64 ...So far I have not been able to get it to work.

attachment.php


AVIVO.jpg
 
Ketxxx said:
After some playing around my conclusion is that Catalyst 9.4 SUCK. Furmark on min/max and average FPS took a heavy hit, average dropping 7FPS, max dropping 11FPS, and min dropping 5-8FPS (forget exactly). Catalyst 9.2 perform very well, although some may find the CCC will not run, easy fix, just use the CCC for 9.3.
Click to expand...

Did you try renaming furmark.exe? With past drivers ATi has intentionally crippled the card for that bench, maybe they've done it again? :ohwell:
 
erocker said:
Did you try renaming furmark.exe? With past drivers ATi has intentionally crippled the card for that bench, maybe they've done it again? :ohwell:
Click to expand...

I still get a decent score but its a little less than the 9.2's but exceptable.Yes I renamed and have left it that way.
 
Why did ATi deliberately cripple their drivers with Furmark? :wtf: It only hurts them.
 
When the 4xxx series was released furmark was responsible for burnin up quite a few cards.
 
You must log in or register to reply here.
Back
Top