• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Cmos Checksum Error/ Cmos Checksum Bad???

all u can do, is try one thing at a time, u got any back up parts, cpu/gpu/memory etc
 
The_Real_DeaL31 said:
try flashing bios again, try a different version this time, then reflash back to your bios version u use, btw how are u flashing?
Click to expand...

i use EZ Flash with a usb stick.
 
try a another alternative, use ez flash with floppy, or make a win 98 boot disk, that's what i do if ez flash dont work, sometimes i get lazy and use asus update which only works 90% of the time, ive been close to killing my board cause of it
 
to me it could only be memory/motherboard, or heatsink not fully secure with processor
 
The_Real_DeaL31 said:
to me it could only be memory/motherboard, or heatsink not fully secure with processor
Click to expand...

the heatsink is secure cause i tightened that thing up til i couldnt twist the screws no more. it's gotta be motherboard or memory, but i'm learning towards the motherboard if all else isnt helping.
 
have u tried one stick of memory
 
is all your settings to factory clocks or auto
 
try one stick of memory then get back to us
 
method526 said:
the heatsink is secure cause i tightened that thing up til i couldnt twist the screws no more. it's gotta be motherboard or memory, but i'm learning towards the motherboard if all else isnt helping.
Click to expand...
:eek:your only supposed to tighten them so far

scratchchin7ad.gif
like someone else said it could be a faulty bios chip, problem is they do go wrong and then the board is caput ,
it also could be 1 of the pins on the chip it'self has come loose or unsoldered ,can happen .

also you said you want to know if you can RMA the board, even though you've took off the mofset heatsinks ,hm i doubt it unless you can put them back on without leaving fingerprints on them ,which is possible btw.

:confused:why did you take them off was it to fit your new cooler?
you also said you've no sound at all which could also indicate you've damaged your mobo .
also not very likely but still possible you might have damaged the bios chip with static electricity, did you ground yourself before starting i'e touching a radiator wear an antistatic wrist strap?
do you no anyone with a good knowledge of pc's who could help out for free
and yes you could have knocked 1 or more of the tiny capacitors or resistors of the board (you'll be able to see if you have by the marks left on the board damaged parts will leave a sort of scuffed mark or an imprint in the solder look on the board with a magnifying glass
 
Last edited:
dr emulator (madmax) said:
:eek:your only supposed to tighten them so far

http://www.snesorama.us/board/images/smilies/scratchchin7ad.gif like someone else said it could be a faulty bios chip, problem is they do go wrong and then the board is caput ,it also could be 1 of the pins on the chip it'self has come loose or unsoldered ,can happen .
also you said you want to know if you can RMA the board, even though you've took off the mofset heatsinks ,hm i doubt it unless you can put them back on without leaving fingerprints on them ,which is possible btw.
:confused:why did you take them off was it to fit your new cooler? you also said you've no sound at all which could indicate you've damaged your mobo .
also not very likely but still possible you might have damaged the bios chip with static electricity, did you ground yourself before starting i'e touching a radiator wore a antistatic wrist strap?
Click to expand...

well my body conducts more heat than electricity so hopefully i wasnt shocking anything. i took the mofsets off cause i got enzotech mofset coolers for free, and they really kept things cool to the touch. i guess i have to get a new motherboard then? i'll get it when i finish this damn paper that's stuck in the mist of my problems.
 
bummer. rma that sucker!
 
method526 said:
the heatsink is secure cause i tightened that thing up til i couldnt twist the screws no more. it's gotta be motherboard or memory, but i'm learning towards the motherboard if all else isnt helping.
Click to expand...

you try to loosen the cooler VARY LITTLE? sometimes it can bow the board and cause problems
 
p_o_s_pc said:
you try to loosen the cooler VARY LITTLE? sometimes it can bow the board and cause problems
Click to expand...

maybe, i'm not screwing into the motherboard, but into a part of the retention bracket that is already screwed into the motherboard, so the board shouldnt be bent.
 
method526 said:
maybe, i'm not screwing into the motherboard, but into a part of the retention bracket that is already screwed into the motherboard, so the board shouldnt be bent.
Click to expand...

then i have no idea but its worth a try
 
method526 said:
well my body conducts more heat than electricity so hopefully i wasnt shocking anything. i took the mofsets off cause i got enzotech mofset coolers for free, and they really kept things cool to the touch. i guess i have to get a new motherboard then? i'll get it when i finish this damn paper that's stuck in the mist of my problems.
Click to expand...

a_hrm.gif
it's a shame we couldn't put you in touch with someone else from here who's near you who could help i'm sure someone wouldn't mind:)
 
well even ASUS says the possibility of a faulty bios chip is possible. i guess it's time to move on. if they say i can RMA the board (even though i do not have the stock MOFSET coolers anymore), then yay!, but i probably wont use the board anyway. time to try the gigabyte limelight!
 
well gentlemen, i cant send this in for RMA because of my heatsink modification. ASUS says i can PAY them to fix it for me, but i dont think i'll do such a thing.
 
method526 said:
well gentlemen, i cant send this in for RMA because of my heatsink modification. ASUS says i can PAY them to fix it for me, but i dont think i'll do such a thing.
Click to expand...

time to get a gigabyte board or buy the other Rampage


also you willing to donate the board to me? If i could get it working i would put it to use for crunching ASAP
 
For your components, and a X48 chipset, you might want to also consider MSI X48C Platinum.
Sorry to here the bad news.
 
You must log in or register to reply here.
Back
Top