• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
  • The forums have been upgraded with support for dark mode. By default it will follow the setting on your system/browser. You may override it by scrolling to the end of the page and clicking the gears icon.

*** F@H Tech Assistance Thread ***

222a.jpg


thanks for all previous helps in past . now my new config is


Phenom II X6
4GB Ram
HD 5750
500 W SMPS
21 LCD monitor HD
win7 64 bit

for this system is 9 hrs to complete the project 2 long or ok ?

thank u again all



edited
 
Last edited:
WU shortages for ATI/AMD GPU clients are common. Sorry.
 
thebluebumblebee said:
WU shortages for ATI/AMD GPU clients are common. Sorry.
Click to expand...



ty 4 quick reply , i got GPU WU after a while , ty


for cpu Folding i need to get extra fans for my cabnet , it getting ~65*C CPU temp and each cores 55+ after ~15+ minutes of folding


atm idle temp = 44*c and 35*c each cores(6)
 
thebluebumblebee said:
Is that for your GPU?
Click to expand...


unled222.jpg



ss showing all infos needed[GPU client, SMP client, cpu utilization , temp , cloak , etc

SMP client is showing 9 hrs and GPU client 5 hrs


my system spe

AMD Phenom II X6 1055T ,Benq G2220HD 22 ,GIGABYTE GA-880GM-UD2H ,COOLER MASTER Elite 310 ,CORSAIR 2GB 240-Pin DDR3 X2 , FSP Saga II 500 W HD 5750
 
9hrs for an SMP2 WU sounds about right but not for an GPU WU although ~6 hrs is what I get for core_16 but they're huge(50 million steps) compared to core_11 WU's (200K steps) and only 2.5hrs a pop

personally I think you'd be better getting rid of Fahtracker and HFM and using just the new V7.1.21 F@Hclient it's much easier to setup and keep track of whats going on
 
Athlonite said:
9hrs for an SMP2 WU sounds about right but not for an GPU WU although ~6 hrs is what I get for core_16 but they're huge(50 million steps) compared to core_11 WU's (200K steps) and only 2.5hrs a pop

personally I think you'd be better getting rid of Fahtracker and HFM and using just the new V7.1.21 F@Hclient it's much easier to setup and keep track of whats going on
Click to expand...


ty for reply , but where to get 7.1.21 version Folding@home client?

download page's latest is 6.31


http://folding.stanford.edu/English/DownloadWinOther

edit

got V7 client

unled222222222222222222.jpg
 
Last edited:
ok so now you've got V7 up and running in order to get your GPU to pick up Core_16 WU's (the new OpenCL WU's) you'll need to do a few things follow these steps and you wont go wrong
if you folow the yellow marker

1: Click Configure click configure.JPG

2: Click the Slots tab click slots then select GPU slot and then click edit.JPG

3: Select the GPU slot you added then click the edit button (bottom right)

4: In the :NAME field type: client-type
5: In the :value field type: advanced type client type in NAME and advanced in VALUE.JPG

6: click OK then OK again then click SAVE

now that you've done that the very next WU your GPU gets should be and Core_16 WU :D
 
i done, ty , hope i am getting new WU's

btw i finished SMP WC now and got creadited with 750 points

Code: 
03:24:05:Unit 01: Uploading 7.02MiB
03:24:05:Starting Unit 00
03:24:05:Connecting to 171.64.65.55:8080
03:24:05:Running core: C:/Users/removed/AppData/Roaming/FAHClient/cores/www.stanford.edu/~pande/Win32/x86/Core_a3.fah/FahCore_a3.exe -dir 00 -suffix 01 -lifeline 3432 -version 701 -checkpoint 15 -np 6
03:24:05:Unit 02:
03:24:05:Unit 02:*------------------------------*
03:24:05:Unit 02:Folding@Home GPU Core
03:24:05:Unit 02:Version 2.11 (Thu Dec 9 15:00:14 PST 2010)
03:24:05:Unit 02:
03:24:05:Unit 02:Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 15.00.30729.01 for 80x86 
03:24:05:Unit 02:Build host: user-f6d030f24f
03:24:05:Unit 02:Board Type: AMD/OpenCL
03:24:05:Started core on PID 4088
03:24:05:Unit 02:Core      : x=16
03:24:05:FahCore 0xa3 started
03:24:05:Unit 02: Window's signal control handler registered.
03:24:05:Unit 02:Preparing to commence simulation
03:24:05:Unit 02:- Ensuring status. Please wait.
03:24:06:Unit 00:
03:24:06:Unit 00:*------------------------------*
03:24:06:Unit 00:Folding@Home Gromacs SMP Core
03:24:06:Unit 00:Version 2.27 (Dec. 15, 2010)
03:24:06:Unit 00:
03:24:06:Unit 00:Preparing to commence simulation
03:24:06:Unit 00:- Ensuring status. Please wait.
03:24:11:Unit 01: 1.45%
03:24:14:Unit 02:- Looking at optimizations...
03:24:14:Unit 02:- Working with standard loops on this execution.
03:24:14:Unit 02:- Previous termination of core was improper.
03:24:14:Unit 02:- Going to use standard loops.
03:24:14:Unit 02:- Files status OK
03:24:14:Unit 02:sizeof(CORE_PACKET_HDR) = 512 file=<>
03:24:14:Unit 02:- Expanded 42448 -> 171163 (decompressed 403.2 percent)
03:24:14:Unit 02:Called DecompressByteArray: compressed_data_size=42448 data_size=171163, decompressed_data_size=171163 diff=0
03:24:14:Unit 02:- Digital signature verified
03:24:14:Unit 02:
03:24:14:Unit 02:Project: 11293 (Run 17, Clone 119, Gen 0)
03:24:14:Unit 02:
03:24:14:Unit 02:Entering M.D.
03:24:15:Unit 00:- Looking at optimizations...
03:24:15:Unit 00:- Working with standard loops on this execution.
03:24:15:Unit 00:- Previous termination of core was improper.
03:24:15:Unit 00:- Files status OK
03:24:15:Unit 00:- Expanded 657913 -> 1092080 (decompressed 165.9 percent)
03:24:15:Unit 00:Called DecompressByteArray: compressed_data_size=657913 data_size=1092080, decompressed_data_size=1092080 diff=0
03:24:15:Unit 00:- Digital signature verified
03:24:15:Unit 00:
03:24:15:Unit 00:Project: 11020 (Run 0, Clone 8329, Gen 3)
03:24:15:Unit 00:
03:24:15:Unit 00:Entering M.D.
03:24:16:Unit 02:Will resume from checkpoint file 02/wudata_01.ckp
03:24:16:Unit 02:Tpr hash 02/wudata_01.tpr:  4057115785 3822478664 3115239368 745130690 277190393
03:24:16:Unit 02:Working on ALZHEIMER DISEASE AMYLOID
03:24:16:Unit 02:Client config unavailable.
03:24:17:Unit 01: 3.34%
03:24:17:Unit 02:Starting GUI Server
03:24:21:Unit 00:Mapping NT from 6 to 6 
03:24:21:Unit 00:Completed 0 out of 1000000 steps  (0%)
03:24:23:Unit 01: 5.29%
03:24:26:Unit 02:Resuming from checkpoint
03:24:26:Unit 02:fcCheckPointResume: retreived and current tpr file hash:
03:24:26:Unit 02:   0   4057115785   4057115785
03:24:26:Unit 02:   1   3822478664   3822478664
03:24:26:Unit 02:   2   3115239368   3115239368
03:24:26:Unit 02:   3    745130690    745130690
03:24:26:Unit 02:   4    277190393    277190393
03:24:26:Unit 02:fcCheckPointResume: file hashes same.
03:24:26:Unit 02:fcCheckPointResume: state restored.
03:24:26:Unit 02:fcCheckPointResume: name 02/wudata_01.log Verified 02/wudata_01.log
03:24:26:Unit 02:fcCheckPointResume: name 02/wudata_01.trr Verified 02/wudata_01.trr
03:24:27:Unit 02:fcCheckPointResume: name 02/wudata_01.xtc Verified 02/wudata_01.xtc
03:24:27:Unit 02:fcCheckPointResume: name 02/wudata_01.edr Verified 02/wudata_01.edr
03:24:27:Unit 02:fcCheckPointResume: state restored 2
03:24:27:Unit 02:Resumed from checkpoint
03:24:27:Unit 02:Setting checkpoint frequency: 500000
03:24:27:Unit 02:Completed  40000001 out of 50000000 steps (80%).
03:24:29:Unit 01: 6.96%
03:24:35:Unit 01: 8.85%
03:24:41:Unit 01: 10.74%
03:24:47:Unit 01: 12.64%
03:24:53:Unit 01: 14.53%
03:24:59:Unit 01: 16.42%
03:25:05:Unit 01: 17.48%
03:25:11:Unit 01: 18.37%
03:25:17:Unit 01: 19.87%
03:25:23:Unit 01: 21.38%
03:25:29:Unit 01: 23.21%
03:25:35:Unit 01: 25.16%
03:25:41:Unit 01: 26.94%
03:25:47:Unit 01: 28.56%
03:25:53:Unit 01: 30.45%
03:25:59:Unit 01: 32.01%
03:26:05:Unit 01: 33.46%
03:26:11:Unit 01: 35.02%
03:26:17:Unit 01: 36.57%
03:26:23:Unit 01: 38.52%
03:26:29:Unit 01: 40.36%
03:26:35:Unit 01: 42.03%
03:26:41:Unit 01: 43.53%
03:26:47:Unit 01: 45.15%
03:26:53:Unit 01: 46.93%
03:26:59:Unit 01: 48.15%
03:27:05:Unit 01: 49.71%
03:27:11:Unit 01: 51.27%
03:27:17:Unit 01: 52.55%
03:27:23:Unit 01: 54.33%
03:27:29:Unit 01: 55.78%
03:27:35:Unit 01: 57.67%
03:27:41:Unit 01: 59.62%
03:27:47:Unit 01: 61.57%
03:27:53:Unit 01: 63.52%
03:27:59:Unit 01: 65.52%
03:28:05:Unit 01: 67.47%
03:28:11:Unit 01: 69.31%
03:28:17:Unit 01: 71.26%
03:28:23:Unit 01: 73.04%
03:28:29:Unit 01: 74.82%
03:28:35:Unit 01: 76.66%
03:28:41:Unit 01: 78.05%
03:28:47:Unit 01: 79.66%
03:28:53:Unit 01: 81.44%
03:28:59:Unit 01: 82.56%
03:29:05:Unit 01: 83.78%
03:29:11:Unit 01: 84.90%
03:29:17:Unit 01: 86.34%
03:29:21:Unit 02:Completed  40500000 out of 50000000 steps (81%).
03:29:24:Unit 01: 87.34%
03:29:30:Unit 01: 88.57%
03:29:36:Unit 01: 89.68%
03:29:42:Unit 01: 91.07%
03:29:48:Unit 01: 92.58%
03:29:54:Unit 01: 94.47%
03:30:00:Unit 01: 96.25%
03:30:06:Unit 01: 97.53%
03:30:12:Unit 01: 98.53%
03:30:18:Unit 01: 99.70%
03:30:20:Unit 01: Upload complete
03:30:20:Server responded WORK_ACK (400)
03:30:20:Final credit estimate, 750.00 points
03:30:20:Cleaning up Unit 01
03:31:40:Unit 00:Completed 10000 out of 1000000 steps  (1%)
 
03:24:05:Unit 02:Core : x=16 <<< that says yes you are
 
I've been procrastinating over doing F@H for ages. :o There are two main questions that seem to be stopping me from jumping in.

1 Will it run my graphics card flat out the whole time? I've got a GTX 580, so you can imagine how this would be undesirable

2 I did run F@H years ago and have a few units to my name. How do I get those back and associate them with TPU?
 
qubit said:
I've been procrastinating over doing F@H for ages. :o There are two main questions that seem to be stopping me from jumping in.

1 Will it run my graphics card flat out the whole time? I've got a GTX 580, so you can imagine how this would be undesirable

2 I did run F@H years ago and have a few units to my name. How do I get those back and associate them with TPU?
Click to expand...

Ad 1. Yes and no. When it runs it runs 100 %. You decide when it runs.
Ad 2. Not possible but the points you earned for another team will still be yours but will not count towards milestones. See my stats here - http://fah-web.stanford.edu/cgi-bin/main.py?qtype=userpage&username=MStenholm
 
Alright kids, I'm back into folding now that I have my i7 2600k ready to go, I kept bluescreening with my 5 GHz o/c, I had to dial it down to 4.5GHz in order to fold.

I got the two GTX470's and the 9800GTEco with the i7.

Whats the best way to set that hardware up for some monster numbers?

Thanks in advance! :)
 
Finish 10 SMP WU's before going for the bigadv WU's.
 
having some issues with the v7 client still i have it folding on my 5870 and cpu in seperate slots at min, the prob is that if i try and set up my gt240 to fold with it it gives an error straight after downloadin a core, thats prob 1

also v7 isnt sending the completed work units right i dont think its actually sent 1 yet ive attached the log, any ideas?

View attachment 41693

at the min im folding with a gui v6 client on nv gt240 and v7 on 5870 and cpu but only the gt240 clients actually getting work completed right
 
Last edited:
3:17:31:Unit 06: Upload complete
13:17:31:Server responded WORK_ACK (400)

that says it uploaded on fine there the other error msg's just mean the server is overloaded at the moment and cannot accept your work at present they should keep trying to send though..
As for the other problem with the GT240 I have no idea other than maybe trying to use an switch to tell the client what your card is so the it d/l's the right core for you GPU
 
oh allright cos ive been uninstallin and reinstallin it to sort it i took every other folding client off too but the gt240 refuses to fold though i did catch the 5870's client running on it once ?? as seen by load in afterburner which was strange , reinstalled and its back to norm, gt240 failing unstable machine .

ive since down clocked a bit so my multi is its norm setting x9 x333 3.0Ghz , so the timings bang on and also alltered it to use 2 cores of four for the smp client so its got processing overhed free for the gpu clients but still gt240 wont fold its trying to use client x11 is that right?
and i cant find the right settings to put in for a gt240

again for V7 client which again seems to make it tricky with hybrid setups which is a shame because if you could throw any card you had in and fold on it that would be optimum

sorry but also when i click to check my stats it keeps going to the old team i folded for before seein t light, the couters not goin up but it makes it harder to see if its earning me out
 
there's walk through just up a bit in this thread follow that to tell Fahclient your GPU is an G92 what exact switch you need I don't know as I don't use nVidia GPU's Buck Nasty might be able to help there more than I can with what switches to use
 
ive gone and returned it to the way it was v7 running cdu @smpx2 on the q6600 and the 5870, with the nvidia on its own client ive them all being productive but still has issues returning work and connecting ave they got 1 pc over there or sumat:D

i couldnt find the switch, V7 did find the card automatically it just kept returning unstable machine 122 which cant be fully right as its working fine now and im unable to find the right switch i tried many allready lol most just disapear so as peeps know they may have been taken but who knows, i do know that if i try to get the gt240 to fold with the 5870 it sometimes takes over from the 5870 with its core x16 but v7 wont work both at same time correctly just returns error

i appreciate the help guys and im now quite happy as at least ive got both cards running plus a 2x smp core but is it worth me running 1 single unix core as well
 
Last edited:
83 on the nv at min folding with stock clocks 575 on core 14xx on shader std im just gona run it seperate anyway as it lets me see my wu and stuff and can be ran all the time whilst gamein,on this my main pc, i intend up scaling up my wu over this year just as soon as i upgrade to an 8 core bulldozer this will fold perm till it dies with 3 decent nv cards in it (mobo has 3 crossfireable slots but i think itll work as gt240 is in one of the main CF pciex slots at min working fine)

im kinda treatin this as a learning period

nv at 99% load sos
 
First time I've setup SMP and first time using client V7. Followed the instructions here to setup.

Does this look correct? I did the thing to setup as bigadv, but I can't tell a regular SMP from a BidAdv:

-one more question... what is TPF? I see that term a lot in the forum but don't know what it means or how the time it shows corresponds to anything.
smp.jpg
 
You must log in or register to reply here.
Back
Top