• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Fake GTX1050, I want use it, pls help!!!

you said you are expecting spd flasher to arrive from amazon. wait till you have it before you try to de-solder anything.
you might be able to fix it without de-soldering
 
Yep man, you are wright!!! Thks!!!

but how I can do it? with the same soft, nvfalsher???

Did someone try it?
 
I got the same VGA card.. I have ch341a with a clip.. driver & software was installed.. but still need a corect bios.. its a 1024 or 1536 vram..?
I've tried to flash spi bios of my dead motherboard (m-flash update failure - no display) and its work..
 
I got the same VGA card.. I have ch341a with a clip.. driver & software was installed.. but still need a corect bios.. its a 1024 or 1536 vram..?
I've tried to flash spi bios of my dead motherboard (m-flash update failure - no display) and its work..
Sincerely I have no idea how detect how much memory I have, GPU-Z can't detect the volume of memory, only I can tell that are 6 memory chips with 2Gb density from what are write on them. Also I tried some bios of 1 Gb, 1.5 Gb and 2Gb and Ti550 chip - (not flashing thru nvidia flash program, the Falcon program always stop) - using Ch341 clip, but without success... For the moment... I have no enough resources of bios, some .rom I was forced transform them on .bin for Ch341 clip...
 
Sincerely I have no idea how detect how much memory I have, GPU-Z can't detect the volume of memory, only I can tell that are 6 memory chips with 2Gb density from what are write on them. Also I tried some bios of 1 Gb, 1.5 Gb and 2Gb and Ti550 chip - (not flashing thru nvidia flash program, the Falcon program always stop) - using Ch341 clip, but without success... For the moment... I have no enough resources of bios, some .rom I was forced transform them on .bin for Ch341 clip...
Got artefak with 1536 MB vram .. then flash it with 1024 vram.. at boot screen it shows 550 ti.. but after install driver detected as gts 450.. and memory chip as HYNIX.. not correct yet.. But the card is work fine and run well when play old game such as Sniper Ghost and CoD..
 

Attachments

  • IMG_20200410_004109.jpg
    IMG_20200410_004109.jpg
    2.2 MB · Views: 167
  • IMG_20200410_003156.jpg
    IMG_20200410_003156.jpg
    1.5 MB · Views: 179
  • IMG_20200409_161058.jpg
    IMG_20200409_161058.jpg
    2.7 MB · Views: 178
  • IMG_20200409_152032.jpg
    IMG_20200409_152032.jpg
    1.8 MB · Views: 164
Specs seems fine for 550 Ti, don't worry about the name.
 
Finally I've made it as ASUS GTX 550 Ti.... Card Name, Sub Vendor and Memory Chips are shown in GPU-Z...
BUT....
Pixle Filrate seems too low...
Texture Filrate and Bandwidth looks normal...
 

Attachments

  • ASUS 550 ti.jpg
    ASUS 550 ti.jpg
    127.8 KB · Views: 144
Last edited:
Finally I've made it as ASUS GTX 550 Ti.... Card Name, Sub Vendor and Memory Chips are shown in GPU-Z...
BUT....
Pixle Filrate seems too low...
Texture Filrate and Bandwidth looks normal...
Nope, looks perfectly normal.

 
Got artefak with 1536 MB vram .. then flash it with 1024 vram.. at boot screen it shows 550 ti.. but after install driver detected as gts 450.. and memory chip as HYNIX.. not correct yet.. But the card is work fine and run well when play old game such as Sniper Ghost and CoD..
I'm glad for you. I know from edairaman1 that GF116 chip is detected like GT450/GTX550 even 650 in relation with the quantity and density of memory allocated. At this point was made only 2 models: with 1Gb and 2 Gb. What I can spouse from the mark of my memory is the density is from 2Gb memory but really I do not know the quantity. So I will try bios with 1gb memory. Can you give the info where did you find the Asus bios for download, or that "artefak with 1536 MB vram" bios?!?...

Oops forgot to adjust that, the i was for another bios rom lol

@Kriptonite i made some adjustments.
Pls write to me again the correct commands in order...
 
I'm glad for you. I know from edairaman1 that GF116 chip is detected like GT450/GTX550 even 650 in relation with the quantity and density of memory allocated. At this point was made only 2 models: with 1Gb and 2 Gb. What I can spouse from the mark of my memory is the density is from 2Gb memory but really I do not know the quantity. So I will try bios with 1gb memory. Can you give the info where did you find the Asus bios for download, or that "artefak with 1536 MB vram" bios?!?...


Pls write to me again the correct commands in order...

Of course you can Find it all and download it at Tech Power Up.. check the Pic of GPU-Z.. you can see what BIOS version that I take..
The card has 6 chip ram.. same as yours.. if each 256 MB then I think all is 1536 MB but all bios file came with Artefak...
Only work at 1024 bios file
At pic detected as GTS 450 flashed with unverified Bios File (Galaxy).. got no subvendor..
I use one of Gigabyte bios.. got Artefak
I use Asus.. and thats the result..

For note I use CH341A programmer V.1.30
No command to write.. just cllick Erase chip-Blank check-Open the bios file- than Write... And Done..

I got this tool for only about $6.. (IDR 90.000) And now I can use again my blank motherboard and the "no driver" fake VGA
 

Attachments

  • IMG_20200410_185604.jpg
    IMG_20200410_185604.jpg
    630.9 KB · Views: 95
I got this tool for only about $6.. (IDR 90.000) And now I can use again my blank motherboard and the "no driver" fake VGA
Well guys, problem solved, thnks to all... finally, after tried many bios, included the Asus one offered by Chloe Price, I found one from Point of View with 1,5 Gb memory and the same qualities of Ti 550... Here is the probe...
 

Attachments

Hi.. how's the card performance after re-flashed?
My card looks perfect at gpu-z as Asus GTX 550 ti.... BUT.. at default clock goes overheat and then show artefak when playing a midle game...
Stabil when downclocked at 800 MHz gpu clock and 900 MHz memory clock..
Looks like GTS 450 Spec..
u can mod the bios (writing in the 800 900 clocks) using Nibitor. Then flash with nvflash as usual (dont even need to use spi flasher lol)
 
Hello,
I have no problem with the Point of view bios since I loaded it... It's working fine, I don't use any overclocking program, I'm content with it...
u can mod the bios (writing in the 800 900 clocks) using Nibitor. Then flash with nvflash as usual (dont even need to use spi flasher lol)
 
u can mod the bios (writing in the 800 900 clocks) using Nibitor. Then flash with nvflash as usual (dont even need to use spi flasher lol)
Oke.. nice advice .. thanks.. so I dont need to take of the Card...

Hello,
I have no problem with the Point of view bios since I loaded it... It's working fine, I don't use any overclocking program, I'm content with it...
Well.. I'll try it then... Will be nice if its work on my card...
 
Hello! The same nonsense and I came across. Maybe you met her too. Which BIOS to try to flash (there is a programmer)
GPU name erased (NVIDIA 12BGB371 1125A1 PAH608.M00 is all you can see)
RAM-ELPIDA 1032 BBBG-50F 8 pieces of chips
BIOS chip- Pm25LD010_flash
 

Attachments

  • 1050ti_joom.jpg
    1050ti_joom.jpg
    83.6 KB · Views: 121
  • 20210218_134134.jpg
    20210218_134134.jpg
    1 MB · Views: 106
  • 20210218_135903.jpg
    20210218_135903.jpg
    1.5 MB · Views: 96
  • 20210218_135908.jpg
    20210218_135908.jpg
    1.3 MB · Views: 108
  • 20210218_142213.jpg
    20210218_142213.jpg
    1.6 MB · Views: 100
  • 20210218_142226.jpg
    20210218_142226.jpg
    3.9 MB · Views: 112
  • 20210218_144803.jpg
    20210218_144803.jpg
    1.6 MB · Views: 88
  • 20210218_144819.jpg
    20210218_144819.jpg
    1.8 MB · Views: 84
  • Aida64_GPU 1050_1.jpg
    Aida64_GPU 1050_1.jpg
    113 KB · Views: 99
  • HW_INFO.jpg
    HW_INFO.jpg
    164.6 KB · Views: 116
  • GPU 1050.jpg
    GPU 1050.jpg
    136.6 KB · Views: 126
Hello! The same nonsense and I came across. Maybe you met her too. Which BIOS to try to flash (there is a programmer)
GPU name erased (NVIDIA 12BGB371 1125A1 PAH608.M00 is all you can see)
RAM-ELPIDA 1032 BBBG-50F 8 pieces of chips
BIOS chip- Pm25LD010_flash
First of all: you must find in which type of video card is used your NVidia chip by brands, after you can search the site for bios starting by brand models with 1 Gb memory, brand by brand until you can have stable functionality of your fake card. After that you can try different bios for models that use your NVidia chip but with different memory quantity: 1,5 Gb, 2 Gb, 3 Gb, until you find a brand with stable bios... Success!...
 
geee
when you people will learn not to buy gpus from alliexpress and alike sites.....
:shadedshu:
with 192 shaders should be gts 450 rev 2.0 or 550ti
 
I tried BIOS from my working GF116_GTX550Ti
on the screen a picture like this:
geee
when you people will learn not to buy gpus from alliexpress and alike sites.....
:shadedshu:
with 192 shaders should be gts 450 rev 2.0 or 550ti
I knew that I was buying a fake, the money was returned immediately and without question I thought I would rewrite the BIOS and it would work, but so far not one BIOS has come up :(
 

Attachments

you have to look for bios that is from card with gf116 and that uses same ELPIDA 1032 BBBG-50F memory.
and even then it might turn out you need to modify the bios in order to run the fake card properly.
 
Back
Top