madmanmarz
New Member
- Joined
- May 22, 2007
- Messages
- 22 (0.00/day)
i flashed my msi x1950 512mb with your 1.7 bios and it worked just fine. problem is the card is not stable at those clocks. anything over 600 for the gpu when running 3d gives me no display. strangely my old his 256mb single slot got me 641/769 w/ stock bios. anyway i'm assuming that my card will not work for increasing the voltage.
the bios did improve performance at those clocks, probably due to the memory timings. (i go by my max frames in atitool - from 670fps max to 722fps with the new bios).
i'll put my stock bios up as soon as i can, but i'm curious if you could make me a custom bios based off 1.7 that gives me 602/776, i'll pm you, ketxxx.
ps if anyone is having troubles with finding the filename for the modded bios, type dir into ms-dos and it will show you the files on disk. mine was x1950mod~1.rom or something like that.
the bios did improve performance at those clocks, probably due to the memory timings. (i go by my max frames in atitool - from 670fps max to 722fps with the new bios).
i'll put my stock bios up as soon as i can, but i'm curious if you could make me a custom bios based off 1.7 that gives me 602/776, i'll pm you, ketxxx.
ps if anyone is having troubles with finding the filename for the modded bios, type dir into ms-dos and it will show you the files on disk. mine was x1950mod~1.rom or something like that.
Last edited: