• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
  • The forums have been upgraded with support for dark mode. By default it will follow the setting on your system/browser. You may override it by scrolling to the end of the page and clicking the gears icon.

Installing drivers, do you reboot after each one or install them all then reboot once?

Do you reboot after each driver or install them all then reboot?

  • I reboot after every driver.

    Votes: 4 8.9%
  • I reboot after every driver if the driver says I need to reboot.

    Votes: 22 48.9%
  • I install all the drivers then reboot.

    Votes: 19 42.2%

  • Total voters
    45

newtekie1

Semi-Retired Folder
Joined
Nov 22, 2005
Messages
28,473 (4.00/day)
Location
Indiana, USA
Processor Intel Core i7 10850K@5.2GHz
Motherboard AsRock Z470 Taichi
Cooling Corsair H115i Pro w/ Noctua NF-A14 Fans
Memory 32GB DDR4-3600
Video Card(s) RTX 2070 Super
Storage 500GB SX8200 Pro + 8TB with 1TB SSD Cache
Display(s) Acer Nitro VG280K 4K 28"
Case Fractal Design Define S
Audio Device(s) Onboard is good enough for me
Power Supply eVGA SuperNOVA 1000w G3
Software Windows 10 Pro x64
I was reformatting my livingroom HTPC and re-installing all the drivers and this question just kind of popped into my head. I'm just curious.
 
I only reboot when asked :)
 
I'll reboot after doing a package, like after all the motherboard drivers, then I'll typically do the rest as a group as well.
 
I reboot when asked, too. However, depending on the driver... I may just reboot anyway.
 
Install all and reboot when done. Never had issues going through that process that I can recall in any of the dozens of systems I've deployed in recent years and saves time. Do what works for you or that you're most comfortable with.

I know some folks that believe its best to reboot after 2-3 driver installs. With modern systems and OSes I think this aspect might actually be less critical. YMMV though. :)
 
I was reformatting my livingroom HTPC and re-installing all the drivers and this question just kind of popped into my head. I'm just curious.
As a general rule, I slipstream drivers into the setup iso's for my personal systems. For client PC's, it depends on the OS. In years past on the 9X kernel based Windows it was important to start with the chipset drivers then video card followed by everything else with a reboot inbetween each. Because of the way the 9x kernel handled/organized drivers, it was important to get them in the right order. With 2k & XP, drivers were handled better and it was important only to do a reboot after the chipset drivers were installed. Everything else could be installed all at once, in any order, rebooting only after everything was installed. With Vista on up, it became important to reboot only once, after all drivers were installed. However, there is no problem if you want to reboot after every driver install. It's just not needed anymore because of the way drivers are handled by the kernel.
 
Got used to old fashioned way of rebooting after each install, but sometimes I reboot only when asked.
 
I will always install the Chipset driver first and then reboot and install the rest of the Mobo drivers then reboot and let windows update from there
 
None of the above!

I reboot when "I" am ready to reboot, and not a second before! It would be very rare, if not totally unheard of, for one of my computers to need a reboot right now, before I could move on. So I finish what it is I am doing and when "I" am ready, I reboot.

If installing/reinstalling my OS, it is the same thing. A new graphics driver is not going to stop me from installing a new network driver, or new sound driver. So I install them all, then when "I" am ready to reboot, I will. Windows will not get confused. It knows the difference between a graphics driver, chipset driver, and SATA driver.
 
Windows will not get confused. It knows the difference between a graphics driver, chipset driver, and SATA driver.
True. From Vista forward drivers can be done all at once. But the 9x kernel OS's could easily get things mixed up. I think that is why people still wonder about it. I have clients that still do a reboot after every driver install on Windows 10. They don't realize they don't need to. But it doesn't do any harm. Microsoft has come a long way in the last 20 years in how Windows handles hardware interactions.
 
Last edited:
Clean Windows install: I install all of the drivers (often via batch which uses flags to forego reboot) then restart (shutdown -r -t 0) at the end.
Graphics driver update: uninstall -> restart -> DDU -> restart -> install -> restart

I remember Internet Explorer 9 required a restart before install because there's two KB updates that were required and one of those needed a restart or IE9 setup would fail. That's not a driver though.
 
I follow the directions. Sometimes when I have a system that is problematic I reboot every time. But typically just when it says reboot

This of course is only in a Windows install. Now I have done it and wait till all drivers installed then reboot. Most of the time this works but I've seen errors because of this.

And I always install chipset drivers and SATA drivers first, unless its an old system that you need a gpu driver to get the correct resolution
 
Last edited:
I reboot when it's convenient for me and not until...
Been doing that since Vista... Unless I need something installed to install something else...
Not sure when the last time that happened was... Been awhile.
 
It depends ... I have had the systems demand a reboot ... I have had multiple installs witha problem requiring a OS install. I have even had utility softwater (back up in this instance) currpt a driver install. Onew thing you should always do, unless you opted for the cheapest possible MoBo, is skip the installation of drivers "in the box".

1. The higher up you go in proce, the MoBo often comes equipped with special drivers and programs with additional brand specifc improvements. With utility software and some multimedia stuff, the "key code" is embedded in the code on the MoBo CD. Don't use the CD, don't get the license.

2. Also best to establish an 'out of box' working condition cause if ya call TS, that's what they may ask . First think ya learn in TS training is the job is not to help the customer but to get them off the phone. So yes, I have had those, please wipe the drive and reinstall the OS with supplied drivers first discussions with Asus.

3. Finally, also have to watch ... some drivers require that certain windows updates have been installed.

4. Finally, some drivers are mutually exclusive, at least according to Asus. Have no use for wireless on desktop but when PC is being build, mo ethernet cable nearby so I used the Wifi to build ... move no office, connected ethernet and, at least accoridng to Asus, can only have one active at a time.
 
Last edited:
I reboot after every Driver is Installed "or when told to by the Program" usually now nVidia doesn't need a restart after a new Display Driver . I use a Program called Driver-Booster and it hasn't let me down since version 3 (Now on 5.2)

Note: upon after the Driver Downloads it creates a Restore-Point before the Install
 
Only when asked.

giphy.gif
 
I reboot after chipset drivers, then GPU then Sound
 
With windows 10 i often dont even bother with the reboot

run all the installers at once, including my bulk VCredist, DX9, and dotnet installers, my commonly used programs (potplayer, MPC-HC, chrome) and then just fire up games or benchmarks before i even reboot

a very small amount of programs/drivers wont work correctly, but usually its something simple like manually starting their programs (launching the realtek exe, etc)
 
Me too. I have my pc as a EMBY Media Server and dont have to restart unless a update requires it
 
I had to reboot after installing NZXT's CAM suite.
I knew something recent needed a reboot but it didn't effect anything including my overclock I was using on the previous version so even it waited until I was shutting down.
Just saying... OS install reboots don't count because you don't have a choice.
 
None of them, really. I voted for reboot when asked as that's the closes. I may well reboot when a driver doesn't ask for it, depending on the exact situation, but not usually after every driver.
 
Big stuff like chipset or AV anything that touches deep Ill reboot for individually.

Otherwise video editing reboot requests ,disk management software, GPU, USB etc. I will do in waves and reboot in one go.
 
I tended in the past to do a 2 to 3 groups of drivers, installing each group and restarting. Last reinstall I did I ran through every one of them befor restarting. W10 figured things out just fine.
 
Turns out I'm lazy, I only re-boot if I can't continue to work (the next driver fails to install/warning of a pending restart/the driver doesn't work).
 
Where's the doesn't reboot option
 
Back
Top