shevanel
New Member
The Msi x58 platinum came today so I started assembling everything.
I'm having an issue where I push the power button and the machine starts up for 3 seconds then shuts off. This repeats non-stop.
here is a hardware list:
msi x58 obv
1x3 kingston hyper
antec ea650 earthwatts psu
8600gt
apogee gt waterblock
I have the wb on as tight as I can get it without it seeming too tight tight.. this is the first time Ive had to use the bracket and screws, usually I'm used to the springs and thumb screw type.
I cleared cmos and checked all conections but I do not know what is wrong, any advice, solutions or other input would be highly appreciative.
Thanks
I just tried to move the pumps rpm plug to the cpu1 panel and it didn't solve the problem.
I'm having an issue where I push the power button and the machine starts up for 3 seconds then shuts off. This repeats non-stop.
here is a hardware list:
msi x58 obv
1x3 kingston hyper
antec ea650 earthwatts psu
8600gt
apogee gt waterblock
I have the wb on as tight as I can get it without it seeming too tight tight.. this is the first time Ive had to use the bracket and screws, usually I'm used to the springs and thumb screw type.
I cleared cmos and checked all conections but I do not know what is wrong, any advice, solutions or other input would be highly appreciative.
Thanks
I just tried to move the pumps rpm plug to the cpu1 panel and it didn't solve the problem.
Last edited: