• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Share your AIDA 64 cache and memory benchmark here

A little OC :pimp:

db941c17_3360mem.PNG
 
No way to beat 8 core CPU but here is mine :)

attachment.php


WOW :respect:
Nice Core, cache and memory speeds and timings :rockout:

This is on LN2 or Phase cooling?
 
Thanks :)

This result was on dice. Memory on air. Cache clock can probably go higher but when I was testing it then I couldn't set higher bclk and lower ratio was giving me worse results in other tests. I just made quick AIDA64 run when I was benching something else.
 
Thanks :)

This result was on dice. Memory on air. Cache clock can probably go higher but when I was testing it then I couldn't set higher bclk and lower ratio was giving me worse results in other tests. I just made quick AIDA64 run when I was benching something else.
What temps do you get with dice?
 
I don't remember exactly. Pot is something near -68/-70C idle while CPU above 0 under full load on all cores. I'm usually not checking idle temps on CPU as most boards can't read anything below 0 or -10C anyway.
 
I don't remember exactly. Pot is something near -68/-70C idle while CPU above 0 under full load on all cores. I'm usually not checking idle temps on CPU as most boards can't read anything below 0 or -10C anyway.
Thanks, I was thinking about pot temps :toast:

I'm getting 70L of LN2 on Tuesday to do some more serious benching :)
 
was tweaking for 32m efficiency

e42corsair_cmd16gx3m4a2666c10_aidamem.png
 
cachemem.png


My ram is bad?
 
My Asus G750JX ROG laptop, cpu capped at 2.8Ghz

aida64 cache & memory benchmark.JPG
 
Last edited:


You have a good mobo and a good CPU it's just getting hobbled by slow ram maybe think about getting some faster ram anything over DDR3-1600 should not only improve your scores but it will also increase overall system performance on a daily basis that you will see
 
Why is your ram running at 666MHz?
when running at higgher frequensi, my gaming controller like xbox 360 controller have delay.
No, it's just 1333mhz so not bad , just slow unfortunately.
:)
You have a good mobo and a good CPU it's just getting hobbled by slow ram maybe think about getting some faster ram anything over DDR3-1600 should not only improve your scores but it will also increase overall system performance on a daily basis that you will see
i have corsair dominator 2133mhz cl9 (2x4GB), but running at default setting. when running xmp, affected delay controller.
 
Still have not finish fine tuning. Mild overclock with XMP DDR4 right now.
 

Attachments

  • cachemem.png
    cachemem.png
    198 KB · Views: 2,018
Still have not finish fine tuning. Mild overclock with XMP DDR4 right now.
:eek:
I can not say anything about your rig.
amazing.
just a dream for me
---------------------
 
v4.30.2903 beta, results for comparison.

3930k @ 4.8GHz/ DDR3 Dom GTs 16GB @ 2400MHz 10-11-11-28-CR1/ 1.575v
 

Attachments

  • cachemem_10_11_11.png
    cachemem_10_11_11.png
    199.6 KB · Views: 1,299
My stock 2133 MHz XMP vs overclock to 2400 MHz
2133 vs 2400 Comparison.png
 
anyone have asus maximus hero VII + G Skill Trident X 2400C10D (2x8GB)?
dear want to see the results?
 
My Ares RAM is running the same frequency and nearly the same timings.
I imagine those Tridents probably use the same IC's as what my Ares has in them(Just binned slightly better)
Performance should be similar to my overclock, would be very cool if someone could confirm this with a test though.
 
G.SKILL TridentX F3-2400C9D-8GTXD @ XMP#2

aida64cachememn2sol.png
 
cachemem.png
I did some overclocking on the RAM, unfortunately I was unable to get it stable at 2800Mhz. 4.6Ghz at 1.280v on the CPU, nice chip.
 
cachemem.png


hope it's not too bad :)
 
Back
Top