• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Share your AIDA 64 cache and memory benchmark here

Screenshot (7).png
 
Two channels DDR4 3200 should be around 50GB/sec max? 37 is slow.
That's what I think and I don't get what's going on. Yes I can mess with primary and secondary timings but to me stock XMP should be already getting at least 50k, if I'm not mistaken.
 
Can anyone help? Why are my memory speeds so low?
I would guess 3300MHz on NB Frequency...
Here's 3600MHz dual channel kit at 1.35V :
cachemem.png
 
That's Quad Channel score, you have half of that (Dual Channel).
 
On latest BIOS (F8)

aida64 cache bench F8 BIOS.png
 
Just messin around.. probably not the most stable system out there.. :laugh:

Capture2.PNG

Capture3.PNG

Capture4.PNG
 
Tuned XMP 1 profile, Karhu 1-hour stable.

Screenshot 2022-09-16 101840.jpg
 
Excellent stock ram score
 
Last edited:
Had some time to play around with my Micron B Die sticks today
cachemem CM MAX 4066 517.png
ZenTimings_Screenshot CB MAX 4066 517 .png


Still busy with testing managed to boot 4133 1:1:1 as well
ZenTimings_Screenshot 552ns.png
ZenTimings_Screenshot 552ns cb max.png


4200MT CL19 1:1:1
cachemem CB MAX 4200 0.96 1.2VSOC .png
ZenTimings_Screenshot CB MAX 2100 FCLK 59K Aida64.png
 
Last edited:
Last edited:
Old photo, but if you're doing a benching run (not 24/7 OC), a room fan designed to dry paint does the trick nicely :D

229079066_525291565360200_3599198131012782065_n.jpg
 
Any suggestions on how I can boost these numbers would be greatly appreciated... the memory latency seems a little high.
1663723185388.png
 
Seems to be a wall at 51.5ns. Got a little brave with the voltages but not pratical for daily or overall performance has Y-cruncher numbers are down by 5 secs compared to 3800 FCLK 1900.
Thanks to @Taraquin once again for the help. :toast: (I did manage to boot 4800MT 2:1)
cachemem 4200 CL14 515ns 61K.png
ZenTimings_Screenshot 4200 CL14 61K 515ns.png
ZenTimings_Screenshot 4800 Z.png


Any suggestions on how I can boost these numbers would be greatly appreciated... the memory latency seems a little high.
View attachment 262419
Most of you subtimings are on AUTO.
What RAM is this? post CPU-Z screenshot of SPD TAB.
 
Last edited:
Most of you subtimings are on AUTO.
What RAM is this? post CPU-Z screenshot of SPD TAB.
How did you know?
Also, I don't know whether I should use it at 4000 with desynchronized Fclk/Uclk or keep the current changes.
1663799765012.png

Sorry for the late response
 
How did you know?
Also, I don't know whether I should use it at 4000 with desynchronized Fclk/Uclk or keep the current changes.
View attachment 262530
Sorry for the late response
I would leave primary timings alone for now and only adjust the subtimings.
I would recommend you bump DIMM voltages to 1.4 - 1.45V. Stock XMP voltage is 1.35V and can cause problems when you try to lower sub timings.

RRDS 4
RRDL 6

tFAW 16 If the system does not boot with tfaw 16 change RRDS 5 and RRDL 7 and change TFAW to 20

WTRS 4
WTRL 12

TWR 16
RTP 8

These are safe values that should boot. On quad channel setup like yours I think it should work.
 
Last edited:
I would leave primary timings alone for now and only adjust the subtimings.
I would recommend you bump DIMM voltages to 1.4 - 1.45V. Stock XMP voltage is 1.35V and can cause problems when you try to lower sub timings.

RRDS 4
RRDL 6

tFAW 16 If the system does not boot with tfaw 16 change RRDS 5 and RRDL 7 and change TFAW to 20

WTRS 4
WTRL 12

TWR 16
RTP 8

These are safe values that should boot. On quad channel setup like yours I think it should work.
Thanks a lot for the advice:)
I will try that out later today

edit: here are the results. I tested it with both synchronized speeds and 4000 memory.
1663902725974.png
1663902734363.png
 
Last edited:
Had to renew my key so now I am current again :cool:

Screenshot 2022-09-24 233103.png
 
This is another Micron Kit I have Crucial Ballistix 3600 CL 16-18-18-38-58 (C9BLM) 16GB DR Micron Rev. E
Running ar 4133 CL16-19-19-44-63 1:1:1. Left CCD on Auto it will only boot with 1.2 CCD. This passes at least 5 cycles of TM5 1usmus.

cachemem CB 4133 CL16 56ns.png
ZenTimings_Screenshot 4133 56ns.png
 
Back
Top