• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Share your AIDA 64 cache and memory benchmark here

This is another Micron Kit I have Crucial Ballistix 3600 CL 16-18-18-38-58 (C9BLM) 16GB DR Micron Rev. E
Running ar 4133 CL16-19-19-44-63 1:1:1. Left CCD on Auto it will only boot with 1.2 CCD. This passes at least 5 cycles of TM5 1usmus.

View attachment 262964View attachment 262965
I see you are above 2K.. very nice. I am on the fence between a 5800X and 58X3D. I do like the price of the X, and 12 cores is a bit excessive for my needs :D
 
I see you are above 2K.. very nice. I am on the fence between a 5800X and 58X3D. I do like the price of the X, and 12 cores is a bit excessive for my needs :D
If you game more than bench the 58X3D maybe the better option. I would wait a few days till the 7700/7600X launches unless you get a really good deal
like what I got with this 5800X. Well a good deal were I am. We dont get Amazon US prices here. :laugh:

 
Last edited:
Are these results good? ballistix 3200 CL16 overclocked to 3733CL16, tell me if you have any advice
3733CL16 ULTIMO.png
3733CL16 ULTIMO ZT.png
 
Put the Samsung B-die kit on the 5800X to see what's what! :laugh:
cachemem 489ns.png
ZenTimings_Screenshot 49ns B.png


Are these results good? ballistix 3200 CL16 overclocked to 3733CL16, tell me if you have any advice
View attachment 263094View attachment 263097
You can try lowering WTRS to 4 WTRL 12 and TWR 16 and RTP 8. This may affect your TRAS and RC settings not sure why your running RTP 14.

I prefer to have those set I would just run tRP 19 and tRAS 44 and tRC 63. If it does show reduced performance in ADIA64 then try 42 / 61 and 38 /58 for RAS and tRC.

Also both SCLs can go to 4 maybe even 2. Adjust VDDP to 0.95V or 0.9V im sure even 0.85V would work

I see you are above 2K.. very nice. I am on the fence between a 5800X and 58X3D. I do like the price of the X, and 12 cores is a bit excessive for my needs :D
Saw the 5800X going for 260 US on Amazon this morning
 
Last edited:
Stable Daily. Hours upon hours tweaking.


nice timings. is it stable running linpack?
don't know, never used linpack, only intel xtu, cinebench r23, aida stability tests, 3dmarks and games i play where it is stable 24/7
 
Immagine 2022-09-28 194213.png
I'm currently debating if 63ns is adequate for this 4x8gb setup or I should seek more. VDIMM is 1,38v
Those sticks really don't like going higher than 1833, but these timings are really stable (threw at it memtest86, prime95, y-cruncher, TM5, OCCT and more for a total of over 24h of testing)
Also tried disabling GDM with terrible results.
Any advice? Thanks
 
Kingston Fury KF3200C16D4 and Ryzen 3600 frequencies 1800 mhz and 4460 mhz
 

Attachments

  • 43-38-19-cl-16-19-19-39.png
    43-38-19-cl-16-19-19-39.png
    92.5 KB · Views: 358
  • 42-446-1116-2.png
    42-446-1116-2.png
    92.3 KB · Views: 338
5800X3D really makes you work for it :laugh:

My VRM's laugh in its face Mwaha..

Capture.PNG
 
5800X3D really makes you work for it :laugh:

My VRM's laugh in its face Mwaha..
Why is all your sub timmings on Auto? Fix that and repost.
Lets is if read/write/copy performance goes up and latency goes down.
 
Why is all your sub timmings on Auto? Fix that and repost.
Lets is if read/write/copy performance goes up and latency goes down.
Thats my 3200C14 DOCP profile :D

not stable.PNG

Lets is if read/write/copy performance goes up and latency goes down.
1933 1:1 is like 1800 1:1 with this CPU..

It's not at all like my 5600X or 5900X.

But it is doing this with 4 sticks, my other CPUs cannot...
 
Thats my 3200C14 DOCP profile :D

View attachment 264124

1933 1:1 is like 1800 1:1 with this CPU..

It's not at all like my 5600X or 5900X.

But it is doing this with 4 sticks, my other CPUs cannot...
How many WHEA 19s at that, give or take a hundred? :p
 
This is the lowest bin Micron Rev. E I have. (C9BJZ) Crucial 3200 CL 16-18-18-36.

cachemem 4925 56ns 105ns D.png
ZenTimings_Screenshot C9BJZ 3800 CL 16 TM5 PASS.png


Crucial 3200 CL16 LB 3800 CL16 Tm5 Pass crop.jpg
 
Last edited:
This is my current result. Crucial Ballistix 3200Mhz CL16 2x16Gb running "safe" settings at 3800MHz.

1664968252769.png

1664968322429.png




Edit: I had the wrong settings, see uclk in the pic above at 950MHz. Forced it 1:1 at 1900MHz and values are a lot better.

1664968945404.png
 
Last edited:
Last edited:
Crucial 3600 CL 16-18-18-38-58 (C9BLM) 8GB SR. Micron Rev E

4133 CL16
cachemem C9BLM 5GB SR 53ns B.png
C9BLM 8GB SR 4133 CL16 TM5 PASS CROP.jpg


3800 CL14
cachemem C9BLM 3800 CL14 545ns 3.png
crucial-3600-cl16-3800-cl14-tm5-pass-crop-jpg.264430


EDIT:
Looks like 1.51V was not needed on this kit it only needed 1.37V to boot and 1.46V to pass 4133 CL16
C9BLM 4133 CL16 1.46v TM5 PASS crop.jpg
 

Attachments

  • Crucial 3600 CL16 3800 CL14 Tm5 pass CROP.jpg
    Crucial 3600 CL16 3800 CL14 Tm5 pass CROP.jpg
    260.2 KB · Views: 1,857
Last edited:
Alder Lake BCLK bug :rolleyes:
Aida64 is only "calculating" numbers, dont actually measure anything "real performance", one of the reason it shouldn't be taken too series..

100

View attachment 264503


150
View attachment 264504

170
View attachment 264505

200
View attachment 264506

215 much wow :laugh:
View attachment 264507

This has been the most thoughtful, useful, and complete response I have received. Thankyou for your time and knowledge, as it is greatly appreciated!

sincerely,

skippy mouse issue : )
 
Back
Top