Unlock the shaders - AMD Radeon RX 560D

[RyoMario90]

Hey guys I also have a Asus Strix EVO and tried to HeX edit the BIOS, found the values that needed to be replaced, saved it with polaris bios editor, flashed my card with it pixel patched it before restart and nothing, no unlock SP's and CU's, can someone look into it? here's my stock rom, thanks!

 

[Simon4650]

R0land i have the same graphics card, but i want to confirm that it is exactly the same if you tell me if your graphics card has a 6-pin connector
I leave my original VBIOS in case you need it :v

 

[yeeosnic]

Hello, Please help me to modify the bios unlocked.
It is Powercolor RX560D 4GB with one fan(no 6 pin connector)
Thank you very much!

 

[eidairaman1]

@Final_Fighter Finalhas an idear on it

 

[Final_Fighter]

i used the instructions provided by aGeoM on post 35 to unlock it. ive tested bioses using them on my other cards and know this method works so credit goes to aGeoM.

 

[yeeosnic]

i used the instructions provided by aGeoM on post 35 to unlock it. ive tested bioses using them on my other cards and know this method works so credit goes to aGeoM.

I use aGeoM's method and it works. Thank you so much.

 

[andrepunk102]

unbelievable, sucess in my card rx 560 4gb powercolor red dragon single fan

 

[Simon4650]

@R0land I have the same card, i will leave you my vbios

 

[xdelios]

Anyone tested this method on any RX 550 card? 2GB or 4GB

 

[Simon4650]

i used de ageom method but now my graphics card not show anything after restart, i know it's my fault

 

[aGeoM]

,

i used de ageom method but now my graphics card not show anything after restart, i know it's my fault

Hi

What do you mean, black screen on POST, or no info show in GPU-Z?

- No post: try re-flashing your original BIOS, you have to use another graphics card as your primary VGA adapter to boot from it and then in windows use ATIWinflash;
1 - Copy original BIOS to ATIWinfash folder.
2 - Rename it original.bin
3 - Press WinKey+r, type cmd
4 - Navigate to the folder (i.e: cd C:\Users\aGeoM\Desktop\ATIWinflash ),
5 - Type atiflash -i (check index of your bricked card ),
6 - Type atiflash -f -p index original.bin. ( replace index with the number of your graphics card from the -i command).

- No info on GPU-Z, just run Atikmdag Patcher.

 

[Simon4650]

my pc turns everything on even my graphics card but it does not do the power beep and it does not show image

 

[aGeoM]

my pc turns everything on even my graphics card but it does not do the power beep and it does not show image

Do you have an old VGA card to use? If you do, put it on the 1st PCIe slot and the 560 on the second one, then do the steps above.

 

[Simon4650]

If I have an old graphics card to use but I can not connect the rx 560 since my motherboard does not have 2 pci express slots

 

[aGeoM]

If I have an old graphics card to use but I can not connect the rx 560 since my motherboard does not have 2 pci express slots

iGPU or APU?

 

[Simon4650]

igpu

 

[eidairaman1]

igpu

Okay hook up your monitor to the igpu

 

[aGeoM]

... and check if you have it enabled in BIOS.

 

[aGeoM]

igpu

Any news? Did you recover your 560?

 

[Simon4650]

I have not tried yet but I think I'll save money for a gtx 1050ti and not bother with this graphics card anymore

 

[aGeoM]

I have not tried yet but I think I'll save money for a gtx 1050ti and not bother with this graphics card anymore

Don't give up, you will feel much better after recovering the card, and with the saved money buy your self a nice meal on a nice restaurant.

Just do what eidairaman1 said and follow the steps I rote. If you did no backup your original VGA BIOS you can search on the VGA BIOS database for one and post here a Screen Shot of you recovered 560

 

[Simon4650]

I have the original BIOS saved, but I'll try another time
I never felt good with this graphics card, I bought a rx 560 strix and they sent me a rx 560 strix evo

 

[johnnyC4G]

hallo, soory for my bad english im from germany i hope you understand me


ASUS Strix rx 560 evo \\ o4g \\

i have a problem when i flash the bios, gpuz is showing me this :

original is this

after flash i cant use the gpu, cpu clokc 0mhz memory 0 mhz
i have test rolands bios and i have try aGeoM methode.
of the end all the same shit pls help me what i can do to unlock???

 

[cdawall]

Need to run ATI pixel patcher

 

[johnnyC4G]

atikmdag-patcher-1.4.6 have i use and no changes in gpu z

my card isnt unlockable ?? i have rolands bios installed an i have 896 shaders and in advanced (gpuz) 1024 shader limit !
can it be that my graphics card has no 1024 but only 869 shader?
and my card has no software lock??

patcher i have use 3 times an then i see gpu clock an memory clock !!