• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
  • The forums have been upgraded with support for dark mode. By default it will follow the setting on your system/browser. You may override it by scrolling to the end of the page and clicking the gears icon.

X800 fuses data for unlocking

Hi W1zzard.

I am new to this,I have an ATI X800Pro vivo 256MB AGP card
if I send yo the information on the fuses would you be able to
let me know if I can soft mod from 12 pipes to 16 pipes please

Reg 00000990 :0xFFF7FFFF
Reg 00000994 :0xFFFFFF9F
Reg 0000099c :0x00001021
Reg 0000402c :0x00006e48
 
Wow. This thread can still be replied to? All these threads that are stickied should be allowed to drop down. Who still worries about X800 or HD3800 cards anymore? More relevant topics should be stickied and anyone needing this ancient information should have to search for it.
 
then why bother to bring it up to the top of the posting lists? I really dont get it, bump a thread to say we dont need it?
 
X800 missing part question, located on PCB B28 ?

vmempencil.jpg
< A piece fell off my x800xt ( B28 ) left edge of top from VDD blue pencil <

When video card is powered; the fan spins up but it gives me a black screen with an error that power plug was not connected, which in fact it is properly plugged in and powered by molex connector. The missing part on the PCB location B28 is the source of my problem.

I don't know what this (B28) was as there are no markings on the one in the picture. I guess the missing part has something to do with the memory side of the card.

I've lurked around several forums over the past several months and nothing, only guess was maybe its like PCB part B21, from this picture there are similar.

My x800 xt was the second video card I ever purchased and has sentimental value to me.
I can solder a replacement missing part, if I knew what it is to be replaced with.

SO...where can I find informational source on what the PCB markings on the card represent?
 
Hi W1zzard.

I am new to this,I have an ATI X800Pro vivo 256MB AGP card
if I send yo the information on the fuses would you be able to
let me know if I can soft mod from 12 pipes to 16 pipes please

Reg 00000990 :0xFFF7FFFF
Reg 00000994 :0xFFFFFF9F
Reg 0000099c :0x00001021
Reg 0000402c :0x00006e48

This specimen (artefact) from the good old time can be unlocked to 16 pipes with flashing 16 pipe BIOS (XP or 16p PRO). Save the original BIOS just in case.

It is nice to see that someone is still modding X8x0 cards but it is realy time to un-stick the thread and to send it for "deserved" rest.
 
I having a bit of difficultly learning proper skills needed to make advanced modifications to video cards. How does one go about finding out what parts are located on the video card.

I need to solder on a new part ( B28 ), I'll order the part from from an electronic part supplier aka. digikey. But I don't know what this part is, as there are no markings for reference a suitable replacement part to order on the part itself, only on the pcb marking B28.

My skill level is now to the point I can advance from pencil scrubbing to small part replacement soldering or variable resistor bridging to avoid graphite displacement. Understanding the use of a multimeter, feedback loops, offset loops and line noise.

I lack the knowledge of finding a repository of pcb documents for part reference of various video cards. Any help would be appreciated in this area.
 
This specimen (artefact) from the good old time can be unlocked to 16 pipes with flashing 16 pipe BIOS (XP or 16p PRO). Save the original BIOS just in case.

It is nice to see that someone is still modding X8x0 cards but it is realy time to un-stick the thread and to send it for "deserved" rest.

Thank you Dolf for your reply much apreciate,and for your valued and precise information.

cheer's:):)
 
ATITool asks for a Kernel Mode Driver on starting.

  • Download and install ATITool
  • Click on "settings"
  • Now scroll to the bottom of the list, you should see four new values listed. (The screenshot here is from an X850 XT PE)

Post yours here and include information like model and number of active pipelines.

I got HIS Radeon X800 GTO PCI-E 256MB with R430 and 2ns Samsung memory.
I want to use ATITool to have a look at my card features. I've downloaded v0.26. On starting, the program asks for a Kernel Mode Driver:
Code:
The Kernel Mode Driver does not seem to be running.
A device driver is required for communication with your video hardware.
I don't understand which driver the program asks for as I've already installed Catalyst 8.593.100.0.
Please help.
Regards

P.S. The information on the fuses:

Reg 00000990: FFFFDFFF
Reg 00000994: FFFFFF9E
Reg 0000099C: 00000A61
Reg 0000402C: 0000AD46
 
Last edited:
Back
Top