• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
  • The forums have been upgraded with support for dark mode. By default it will follow the setting on your system/browser. You may override it by scrolling to the end of the page and clicking the gears icon.

X800 fuses data for unlocking

here's my fuses

I want to bios mod it, but I have no floppy drive and can't seem to get a bootflash drive that works. how can I tell if this one is unlockable? I did see samsung on the mem chips
 

Attachments

  • X800 fuses.jpg
    X800 fuses.jpg
    33.3 KB · Views: 790
Can I unlock any pipes?
Sapphire X800GT AGP

DeviceID 4A4A
Chip Name R420
Host Interface AGP
Catalyst Version 8.4
Memory Size 256MB
Memory Type DDR3
Memory Bus Width 256-bit
Active Pipelines 8
Default GPU Clock 475.00
Default Mem Clock 490.00
CONFIG_DIE_FUSES 0xEFF36FFF
CONFIG_SUBSTRATE_FUSES 0xFFFFFE9D
CONFIG_ROM_FUSES 0x22
GB_PIPE_SELECT 0x25650


I have same card with same atitool attributes, only weird thing is, it says on core: "RADEON X800SE" 215RABCGA12F :eek:
 
Hi my friends

Hello Forum members:

I have an Ati 800GTO,PCI-E:

Ati Radeon X800GTO256MbGDDR3Connect3D.jpg

Can i Mod this Card?
Thanks

Help Dear Friend Dolf.
 
Last edited:
jtrainer, it looks like you should be able to flash. check out my posts in this thread.:cool:
 
Ok here's a screen of my x800 GTO AGP

Any ideas???

4qpyqp.jpg
 
It's unlockable
 
If I wasn't at work, I think I still have a modded bios on my home machine for my old x800

Nice... Could you PM me when you get home and maybe send it on over if you don't mind and I'll give it a try.

TY

Can that bios be used with winflash?
 
Do you have the AGP Sapphire x800gto?

I believe the above bios is a modded R430 AGP bios off of a sapphire x800gto
 
Bytor, never could find that bios, must have lost it when I wiped my system - probably didn't put it on my secondary drive :-/
 
X800 XL Revival

Hi guys, i just got a X800XL DDR1 PCI-E that was flashed with bad bios and doesn't seem to work anymore...
what i want to do, is find the bios of the card and then reflash it...
but i don't know which card is it...i got it without a sticker or cooler, just this...

if anyone recognizes the card and has a BIOS of it please send it to me!!! :):)


just click on the images to have a full view...

card overview...


R430...Infineon DDR1 ram


backside...


RX800/XL REV 1.0


Thanks!!! :)
 
That SHOULD be it...Thanks!!!

I base my thought that it is DDR1 from the memory modules that say:

Infineon
DDR SGRAM

it probably IS ddr1 right?

Damn i have to find a cooler too... :(
 
I was reading the forum but I'm not sure, what can I do? can I mode it to AIW X800XL with 128mb?... if is possible... please help ;)

d2p.png
atitoolqy2.jpg



P.d.: on the GPU say R430 and X800 PRO, the memory speed is CL1.5 samsung
 

Attachments

Last edited:
X850 Pipe unlock possible?

Hi all :3 This is my first post and i'm gonna do my best to provide alll the info you need but if i miss something please don't flame me D: I've read all the modding guides and stuff and i can't unlock the extra pipes on my X850 Pro VIVO card. It's currently flashed as a X850 XTPE and the XTPE drivers are installed. Here's some info from ATI tool...

Device ID - 4B4C
Chip Name - R481
Host Interface - AGP
Catalyst Version - 9.3
Memory Size - 256 MB
Memory Type - DDR3
Memory Bus Width - 256 Bit
Active Pipelines - 12
Default GPU Clock - 540.00 MHz
Default Mem Clock - 590.00 MHz
CONFIG_DIE_FUSES - 0xFFFFBFFF
CONFIG_SUBSTRATE_FUSES - 0xFFFFFF9E
CONFIG_ROM_FUSES - 0xA60
GB_PIPE_SELECT - 0x12B84

(sorry for a lack of a screen shot, but i assure you this is accurate)
 
Mine...

Hi... was about to flash untill i read about fuses and locks :(

I'm afraid i cant flash but i cant read these codes, plz let me know if i can flash or not :(

Im interested in activating the last 4 pipelines of my videocard... here my info comes:

CCC-INFO

Primary Adapter
Graphics Card Manufacturer Built by ATI
Graphics Chipset RADEON X800 PRO/GTO
Device ID 4A49
Vendor 1002

Subsystem ID 0002
Subsystem Vendor ID 1002

Graphics Bus Capability AGP
Maximum Bus Setting AGP 8X

BIOS Version 009.004.001.013
BIOS Part Number 113-A26101-107
BIOS Date 2004/07/19

Memory Size 256 MB
Memory Type DDR3

Core Clock in MHz 473 MHz
Memory Clock in MHz 452 MHz

============================================

ATITOOL-INFO

Device ID 4A49
Chip name R420
Host Inteface AGP
Catalyst Ver 10.2
Memory Size 256 MB
Memory Type DDR3
Memory Bus width 256 Bit
Active Pipelines 12
Default GPU Clock 475.00 MHz
Default Mem Clock 450.00 MHz
CONFIG_DIE_FUSES 0xFFF3DFFF
CONFIG_SUBSTRATE_FUSES 0xFFFFFF1E
CONFIG_ROM_FUSES 0x20
GB_PIPE_SELECT 0xAD46


---------------------------
I was following these 2 guides in order to modify bios and enable last 4 pipelines:

http://forums.techpowerup.com/showthread.php?t=8060
http://forums.techpowerup.com/showthread.php?t=11&highlight=r420

thx...
 
Last edited:
Sorry for awakening such an old thread, but i bought a sapphire x800gt used for my old comp.
tXDs8.png

9ksbv.png

FShsv.png


Is there any thing that can be done? i found that there it was laser cut that i can fix, but is there any point?

I breath life in to my old computer to play SC II and it ran fine at 30fps, more is beter :P.
 
Back
Top