Your PC ATM

[peche]

thats a huge block ...

 

[Vego]

Beautiful build! I am planning to switch my 750D for that case in the near future. What pump are you running and where is it located?

Pump is in the bottom, hidden, its a D5 with EK top

 

[Arrakis9]

i put some hardware in it just to test the air cooling out. not sure what i want to do next..

 

[Warrgarbl]

Just finished upgrading my PC. Had an i7-2600k @ 4.4Ghz which I salvaged from a closed loop water cooler failure that died spectacularly (WHEA_UNCORRECTABLE_ERROR) on a Friday afternoon, of all times, and took the motherboard’s EC Firmware with it. After reflashing the board I still had an i5-2500 lying around, but decided to buy a nice upgrade. I think it looks great in all white and black

 

[Jetster]

Just finished upgrading my PC. Had an i7-2600k @ 4.4Ghz which I salvaged from a closed loop water cooler failure that died spectacularly (WHEA_UNCORRECTABLE_ERROR) on a Friday afternoon, of all times, and took the motherboard’s EC Firmware with it. After reflashing the board I still had an i5-2500 lying around, but decided to buy a nice upgrade. I think it looks great in all white and black

That's how you support a GPU from hanging

 

[Warrgarbl]

Yes... it's increasingly necessary for GPUs with third party coolers. My company has even bought some plastic parts we place under the GPUs for transport, we had some cases where the GPUs warped just by being shipped around.

 

[Ruru]

Made some cleaning, those dust filters are more clean that it looks

SSD is behind the MB tray so don't wonder about it.

 

[GelatanousMuck]

Here's Mine!

If you're curious as to where those tubes are going click the link in my Sig.

 

[Ruru]

View attachment 77410

Here's Mine!

If you're curious as to where those tubes are going click the link in my Sig.

Ur PSU is upside down bro!

Sabertooth? I'll drink to that! Best fking motherboards EVER!

 

[GelatanousMuck]

Made some cleaning, those dust filters are more clean that it looks

Wash them in Dawn or some dish detergent and water, dry them with a hair dryer on low heat and they'll look brand new.

Ur PSU is upside down bro!

The electricity doesn't care!

 

[Ruru]

Wash them in Dawn or some dish detergent and water, dry them with a hair dryer on low heat and they'll look brand new.



The electricity doesn't care!

Nah, I'll wash the filters when I wash dishes

Haha, true.

 

[Frick]

Put together a cheapo system for my sister. The case is from an Acer M1641, and it would actually be at least ok with some modding. I won't be doing that though. Cables could probaly be a bit nicer, but not much anyway. No front fan annoys me, but at least the thermals are much better than it was with the stock Celeron cooler I tried at first. That really didn't work.

Motherboard: LGA1155 from a Dell Inspiron 620.
CPU: Intel Core i3 2120 3.3Ghz + CM Hyper TX3 (with one broken pin, but it works well enough)
RAM: 2x2GB DDR3. I was thinking about parting with half my memory, because I seriously don't need it. But I like my symmetrical RAM too much.
GPU: Powercolor Radeon HD7850 PCS+ 2GB.
HDD's: 250GB+500GB something something.
PSU: FSP400-60THN-P. Yeaaahhhh dual 12V lines at 14A and 15A and the 15A line feeds the CPU only. Adapters galore.

So yeah. The innards of the PSU looks pretty fresh actually, I don't think it has been used much. Comes from one of them cheap office machines iirc. It seems the CPU cooler/PWN controller only has two or three settings though, so it gets kinda loud. BTW, you can't fit any fan at the front, unless it is really thin. No fan at the sides either, the CPU cooler gets in the way.

And yes, you have to remove everything to swap HDD's in the upper bays.

 

[Whilhelm]

Finished the Hard pipe loop in my old Murdermod TJ-07.

 

[JATownes]

Sorry for the delay in posting the update to my first Intel...It's been a crazy week, and I haven't had a lot of time to play. But here she is:

And a little bonus:...The mirror finish on the Heatkiller is pretty amazing:

Finished the Hard pipe loop in my old Murdermod TJ-07.

View attachment 77425
View attachment 77426

DAMN!!! That is really sick looking loop!

 

[PP Mguire]

Haven't had much of a chance to do stuff with my PC since I got the new board and stuff. A lot will be changed in the next 2 months, but for now I needed to make my rig Quakecon ready so here it is. Also was able to finally get my custom desk up after 3 months of not being able to. Didn't quite finish as I was tired and just wanted to game but it's pretty much finished. Goofed when I bought the LEDs but this'll do for now.

 

[ensabrenoir]

Haven't had much of a chance to do stuff with my PC since I got the new board and stuff. A lot will be changed in the next 2 months, but for now I needed to make my rig Quakecon ready so here it is. Also was able to finally get my custom desk up after 3 months of not being able to. Didn't quite finish as I was tired and just wanted to game but it's pretty much finished. Goofed when I bought the LEDs but this'll do for now.View attachment 77437 View attachment 77438

More light.....more pictures please

 

[R00kie]

Watercooling build is finally finished! This was the most exciting thing that I've ever done to my PC

 

[PP Mguire]

More light.....more pictures please

Sure thing, what do you want to see?

Watercooling build is finally finished! This was the most exciting thing that I've ever done to my PC
*snip*

Nice job, I like the white tube. Where did you get those angled EK fittings? Only ones I could find were the black EK ones I have now and had to spend a metric ass ton for Bitspower.

 

[R00kie]

Sure thing, what do you want to see?

Nice job, I like the white tube. Where did you get those angled EK fittings? Only ones I could find were the black EK ones I have now and had to spend a metric ass ton for Bitspower.

The 90 degree ones are from Alphacool, and the 45 ones are indeed from EK. Both variants bought from Scan UK. You can still get some from their own shop, but seeing that you live in US, it might take some while before they get to you.

 

[PP Mguire]

The 90 degree ones are from Alphacool, and the 45 ones are indeed from EK. Both variants bought from Scan UK. You can still get some from their own shop, but seeing that you live in US, it might take some while before they get to you.

Alphacool? They look like they say EK though

Edit: Shouldn't post before coffee, the angles are adapters lol.

 

[R00kie]

Alphacool? They look like they say EK though

Edit: Shouldn't post before coffee, the angles are adapters lol.

Hah, yes they are adapters

 

[Jetster]

 

[ensabrenoir]

!!!!!!!!!!!!!!!!!!!!!!
Wifey stumbled upon an old 42" comercial display monitor at the local Habit for Humanity for................$20!!!!!!!!!! its an Nec....ips 60hz 1080p gotta figure out if this thing is overclockable...

.....and mount this thing further away..... anyway nice little new toy for her....

 

[GhostRyder]

Soon @RCoon , @rtwjunkie , and @the54thvoid


Somehow messed up my first order so I was able to redo it, still waiting on shipping details (Yes I edited out my information and the Order Number). Any who, I will be making a video of the journey to the Titan XP posted on the forums as soon as I get it and doing some serious work/upgrading which will be posted here and in its own thread.

 

[rtwjunkie]

which will be posted here and in its own thread.

Look forward to your reporting!