Your PC ATM

[R00kie]

Hahaha, I love my RAM sticks! 1333 @ 1933MHz, over 1.7volts and I'm not afraid of giving even more! These just fking kick ass!

Holy gobsickles, dat CPU voltage 0_o
How is it not cooking itself...

 

[Ruru]

Holy gobsickles, dat CPU voltage 0_o
How is it not cooking itself...

Is dat much? Everything under 1.5 isnt nothing..

I can pull 1.6+ without being afraid

 

[JATownes]

Clean Desk! It is rare, so a picture is needed.

 

[R00kie]

Is dat much? Everything under 1.5 isnt nothing..

I can pull 1.6+ without being afraid

I'm pretty sure 1.35 is the safe limit...?

 

[Ruru]

I'm pretty sure 1.35 is the safe limit...?

Probably, haven't broken yet (it won't go 5GHz dammit!)

e: Won't go even 80C in full load

 

[Ruru]

Now I think it's the limit

The language is Finnish on the Aida64 screen, memory latency benchmark.

 

[Random Murderer]

Now I think it's the limit

The language is Finnish on the Aida64 screen, memory latency benchmark.

What voltage are you pushing through the RAM to reach that speed? You're just a stone's throw from DDR3-2000, if the headroom is there on voltage, I'd go for it. Either that, or drop the speed to 1866 and tighten up timings a little bit.

 

[Laurijan]

My PC and PC desk

 

[Ruru]

What voltage are you pushing through the RAM to reach that speed? You're just a stone's throw from DDR3-2000, if the headroom is there on voltage, I'd go for it. Either that, or drop the speed to 1866 and tighten up timings a little bit.

1.69V, I'm not afraid until 2V so I might try

 

[peche]

@Laurijan its that a vaporizer"?

 

[GreiverBlade]

Temporary before a good cleaning and a arrival of fresh tubing and led strip tomorrow ...

soo i decided to remove all my Corsair AF and SP from the rig ... back AF140 replaced by TY-147, front 120 AP and AF replaced by Sharkoon Sharkblade 120

but then i got the idiotic idea to remove my Triton from it ... since my only air cooler around is a Scythe Katana 4 ... i do with what i have ... HIGH RAM IS NOT KATANA FRIENDLY! oh well workaround ...


playing with no-flash and flash pics ... (same settings the rig was running at both moment...)


either a good cleaning and complete disassembly/reassembly or ... a Thermaltake Core P3 or 5 ...

 

[Laurijan]

@Laurijan its that a vaporizer"?

Yes - electronic cigarette

 

[peche]

Yes - electronic cigarette

i have one too,

Spoiler: peche's vapo

This one!

how much do you have with it?

 

[GreiverBlade]

i have one too,

Spoiler: peche's vapo

This one!

how much do you have with it?

user should hide any vape while taking pc pictures ... that's not the 1st time this happen...
i have nothing against but it's "your PC ATM" not "your vape ATM" ... (or you can contact him via PM to discuss that @peche )

oh almost forgot ... top fans : Noiseblocker Blacksilent Pro PK-2 (140mm) oh well they were lying on the shelf .... temporary use is still a use


edit... surprised the Katana 4 hold my 6600K @4.4 easily under 66° during gaming (well i repasted with Thermal Grizzly Kryonaut, 1st test )

well couldn't sleep so ... i advanced a bit ...

finally found a use for my Games Workshop Citadel Tank Brush ... de-dusting ... and the sculpting tool was also useful ... pardon me the mess on my desk ...


oh well ... looks nice, except the fittings ... might need to find some more adapted ...


overloaded front? naaah..., cable salade... annnd set...


oh well ~ 6hrs before i get my tubes might need some sleep ... (3:54am ....)

 

[dorsetknob]

To Be Continued in another Thread

 

[peche]

To Be Continued in another Thread

Tag me if possible, i like to watch project logs!

Regards,

 

[GreiverBlade]

shuuucks ... delivery did not happen ... so i am stuck with my main rig on standby .... so i took the bait and ordered some fittings and stuffs in addition (hopefully i will get both package tomorrow ... )

well i still have my Alpha to kill time .... (that and my pencils ... )
out of topic ... updates can be reaaaal long ... 28 min to kill ended in a speed draw ... (well ... even 15minutes updates, for me, are long ...)
seems to be missing something ............. not anymore ... luckily my update took 10minutes more ...



on topic
way less dusty tho ... i need to buy more GW Citadel Tank Brush ... even the flash does not show them (compared to previous shots where ... well ... you know, i didn't saw dust until i took a pics with the flash )


a bit more to wait ...

To Be Continued in another Thread

interested in the build log ... i love "oldies but goodies"

 

[stinger608]

To Be Continued in another Thread

Does that overclock?????? Bhahahaha

 

[GhostRyder]

It is time.

 

[GreiverBlade]

It is time.

View attachment 77766

meh... you didn't get something with a better real Price/Perf ratio?

joking aside .... nice one nonetheless

albeit not worth the price at all imho not even for the 12gb or the performances, hell ... nvidia really did good to sell us GPU series that didn't even existed before ... (well ... that was Maxwell and then Volta but no Pascal until AMD did show they would do Polaris/Vega ) more and more i am inclined to call Pascal, Maxwell 1.5 which would make sense of that Titan X calling being same as the Mawell one and not Titan Y or whatever nvidia would have come with ...

looking forward the installation and run of your new toy

nahhhh i am fine with my 1070, thanks nvidia (and domestic insurances ... )

 

[GhostRyder]

meh... you didn't get something with a better real Price/Perf ratio?

joking aside .... nice one nonetheless

albeit not worth the price at all imho not even for the 12gb or the performances, hell ... nvidia really did good to sell us GPU series that didn't even existed before ... (well ... that was Maxwell and then Volta but no Pascal until AMD did show they would do Polaris/Vega ) more and more i am inclined to call Pascal, Maxwell 1.5 which would make sense of that Titan X calling being same as the Mawell one and not Titan Y or whatever nvidia would have come with ...

looking forward the installation and run of your new toy

nahhhh i am fine with my 1070, thanks nvidia (and domestic insurances ... )

Yea I know I am a bit of a hypocrite, but I wanted one and decided since one of these basically is better than the three 290X's it was ok

Yea I am not a big fan of the series in general mostly because of the way they used to be (Still a bit overpriced in my book) compared to today even. But I took a gamble and decided that the GTX 1080ti may not come out this year (Or even at all) and I wanted the highest card to upgrade to for BF1. Alcohol also had something to do with it (Though I had to redo the order twice LOL so maybe its brain damage instead).

I plan on making a thread about the card so be on the lookout for it

 

[GreiverBlade]

I plan on making a thread about the card so be on the lookout for it

tag me in!

but I wanted one and decided since one of these basically is better than the three 290X's it was ok

fair point ... me ... it's a lightning that decided for me (with a delay ... unlike the rest of my previous rig )

I wanted the highest card to upgrade to for BF1. Alcohol also had something to do with it (Though I had to redo the order twice LOL so maybe its brain damage instead).

BF1 is not a bad argument alcohol neither ... i often get that as i am Walliser ... and lucky you didn't get 2 (or even worse 1 received and 2 charged )

edit: YES!

1. 6m Alphacool tubing? 3m is already overkill for a single CPU loop i know, but they did a 2 for 1 promo and you can't ever have enough of them ... plus i can do a little longer connection to avoid kinking and still have margin on the reserve length, also new black fittings since chrome fitting seemed out of place ...


2. this..... because that ... was downright ugly (even hidden in the back chamber ... )


3. assembling, leak testing... finger crossing


3. HELL F*CKIN YEAH, IT'S ALIVE (well ... dunno why but my best moment came from loop assembly, during the 4690K and 290 time, the 980 Poseidon Platinum and now that one ... it's ... exhilarating when all runs fine. )


a little more will be on the second post (10 img limite )

 

[GreiverBlade]

on the liquid used ... lesson learned i should have avoided Mayhems (still have a 1L bottle aside ... nope never again, only in the Triton it behaved right ...)
Phobya ZuperZero Red (well UV Red but i am not a UV fan, white is enough ) also the point of having more than enough length, no kinking indeed, some little pressure point on some connection but nothing reductive


a 120mm led strip? (BitFenix Alchemy 2.0 Magnetic White, 6, 120mm ) what's the point? well 1st: testing (i use 2 Phobya 300mm on the top of the case ) and also 2nd point: ... more light for Takoko . (special @peche ) will surely order more of them as Magnetic is way more practical than adhesive.


almost forgot ... how to feel epic while assembling ... (well also because of noisy neighborhood) ...
a neat playlist

 

[P4-630]

on the liquid used ... lesson learned i should have avoided Mayhems (still have a 1L bottle aside ... nope never again, only in the Triton it behaved right ...)
Phobya ZuperZero Red (well UV Red but i am not a UV fan, white is enough ) also the point of having more than enough length, no kinking indeed, some little pressure point on some connection but nothing reductive
View attachment 77805

a 120mm led strip? (BitFenix Alchemy 2.0 Magnetic White, 6, 120mm ) what's the point? well 1st: testing (i use 2 Phobya 300mm on the top of the case ) and also 2nd point: ... more light for Takoko . (special @peche ) will surely order more of them as Magnetic is way more practical than adhesive.
View attachment 77806 View attachment 77807 View attachment 77808

I like your Takoko
Too bad your GTX1070 didn't come with a backplate

 

[GreiverBlade]

I like your Takoko
Too bad your GTX1070 didn't come with a backplate

mah ... the 1070's PCB is literally perfect ... "DAT MAT BLACK!"