• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Your PC ATM

^ a single rad? how are those temps sol? Mine where unacceptable with an XSPC Delta V3 on my quad using a single 12cm rad :ohwell:
 
^ a single rad? how are those temps sol? Mine where unacceptable with an XSPC Delta V3 on my quad using a single 12cm rad :ohwell:

45c idle in a 35c ambientt room load is somware around 63ish but im swapping it out with my E7200 gonna sell the quad this mobo doesn oc it wirth a damn
 
stupid paypal and newegg problems.. i won't be having my mobo until next week!! ARGGG

my new pics will have to wait
 
Leak testing at the moment, just put it all together roughly, the black Tygon comes next a little more cutting here and there, then the hardware goes in. :)

DSCN0382.jpg

DSCN0383.jpg

DSCN0384.jpg
 
That looks awesome! I am eager to see if your cable management skills match up to your water cooling :D
 
@erocker... what tubing is this?

looks great, man! :cool:
 
Indiana Jones helped me with the current. Note:it did look nicer......
son.jpg


mydesk2.jpg


mydesk.jpg


Little Miss Ruby laying some ashes on a His Ice Video card.:toast:
onhis.jpg




/No worries below:) it just sucks(I was going to start taking pics of old hardware)

And then after I took these.....I got up and grabbed my tri-pod with the camera and to walk off with it still plugged in.....

Now the camera works, but I can't connect to my PC with the USB anymore. Tried two cables, and both cables work with other USB hardware. So it looks like I'll be opening my camera and installing a new female usb plug if I want to use it again.......(wish it had blue tooth)
 
Last edited:
The silver tubing is pimp:pimp:
 
Now the camera works, but I can't connect to my PC with the USB anymore. Tried two cables, and both cables work with other USB hardware. So it looks like I'll be opening my camera and installing a new female usb plug if I want to use it again.......(wish it had blue tooth)[/I]

Cardreaders ftw :D
 
I second Thrackan.

@erocker: That tubing looks great! :)

off-topic: Why don't we have a :thumbsup: emoticon? I always find myself wanting to give somebody a thumbs-up for some reason :confused:
 
I always enjoy tuning into this thread.

Lastnight I totally re-did my "computing environment"

I usually have my Techstation out in the shop..but it's too damn cold to enjoy it...so it came in for a few months...along with the Bad Ass 2.1 Speaker set up...so now I can JAM in the comfort of my own home lol...

I also got tired of the constant confusion and folding tables and all the random PC crapola everywhere in the Music Room so I did a major cleaning...this is a rare event for me :D

Managed to weed it down to just 5 rigs:roll:

Two are shipping out . The Green A900 is my Son's. The Red A900 is for my Brother-InLaw and family for Xmas. The Lian Li is headed to Canada. The Black tower under the desk is my SOldam Case and SKullTrail rig...the techstation is the Asus Blitz Formula.

pcroom022qd9.jpg


pcroom019oq9.jpg


pcroom020ui1.jpg


pcroom021rp9.jpg


pcroom027fp1.jpg


pcroom028ee8.jpg


pcroom026lw2.jpg


pcroom025ax7.jpg


pcroom024dl1.jpg
 
I always enjoy tuning into this thread.

Lastnight I totally re-did my "computing environment"

I usually have my Techstation out in the shop..but it's too damn cold to enjoy it...so it came in for a few months...along with the Bad Ass 2.1 Speaker set up...so now I can JAM in the comfort of my own home lol...

I also got tired of the constant confusion and folding tables and all the random PC crapola everywhere in the Music Room so I did a major cleaning...this is a rare event for me :D

Managed to weed it down to just 5 rigs:roll:

Two are shipping out . The Green A900 is my Son's. The Red A900 is for my Brother-InLaw and family for Xmas. The Lian Li is headed to Canada. The Black tower under the desk is my SOldam Case and SKullTrail rig...the techstation is the Asus Blitz Formula.

pcroom022qd9.jpg


pcroom019oq9.jpg


pcroom020ui1.jpg


pcroom021rp9.jpg


pcroom027fp1.jpg


pcroom028ee8.jpg


pcroom026lw2.jpg


pcroom025ax7.jpg


pcroom024dl1.jpg
Sweettt:D
 
thought id post while its tidy lol

100_2955.jpg


100_2953.jpg
 
umm, a piano, I believe edit: wow I need to start refreshing old tabs before I reply :o

Very nice and clean setup CD, too bad you have to ship away that beast :laugh:
 
It'd be easier to ship the piano I think.

To give you an idea ofhow much work I put in... The Big Black Bastard under the desk was on a folding work table to the left where the Red Beeyotch is in the pics...that Red station is thick steel...:twitch: And the Black Rig has 5 HDDs, 4 pounds of copper pn the two GFX cards, and is attached by about five feetof tubing to the Large white box to the left that the printer is on. That Summamabitch has got 3 PA 120.3 rads, Two Iwaki RD 30's and 9 S-FLex, two reservoirs, and two power supplies. THat was under the FOlding Worktable on the right:wtf:

My wife pulled the table away as I Held the hugelyheavy Soldam. I then Lifted the Huge white COoler Box over the desk and placed it on the right (which is where the Red Techstation was LOL). This twisted the tubing up...which is attached to 8 brass ball valves with 6 tubes runninginto the PC...OMG. SO I had to flip the Soldam over threes times to straighten them out.

FInally I couldput the Soldam under the desk .

Not to mention the HUGE pile of PC parts on the FOlding work table ...which went down to the shop (three trips). Plus two 40 gallon bags of trash (mainly boxes and packing materials).

It was a helluva day.

Oh and I had to trot the Bigass 2.1 speaker set up from the shop.

Too much fun.
 
CREDIT to all of you, nice machine's you got :)
 
It'd be easier to ship the piano I think.

To give you an idea ofhow much work I put in... The Big Black Bastard under the desk was on a folding work table to the left where the Red Beeyotch is in the pics...that Red station is thick steel...:twitch: And the Black Rig has 5 HDDs, 4 pounds of copper pn the two GFX cards, and is attached by about five feetof tubing to the Large white box to the left that the printer is on. That Summamabitch has got 3 PA 120.3 rads, Two Iwaki RD 30's and 9 S-FLex, two reservoirs, and two power supplies. THat was under the FOlding Worktable on the right:wtf:

My wife pulled the table away as I Held the hugelyheavy Soldam. I then Lifted the Huge white COoler Box over the desk and placed it on the right (which is where the Red Techstation was LOL). This twisted the tubing up...which is attached to 8 brass ball valves with 6 tubes runninginto the PC...OMG. SO I had to flip the Soldam over threes times to straighten them out.

FInally I couldput the Soldam under the desk .

Not to mention the HUGE pile of PC parts on the FOlding work table ...which went down to the shop (three trips). Plus two 40 gallon bags of trash (mainly boxes and packing materials).

It was a helluva day.

Oh and I had to trot the Bigass 2.1 speaker set up from the shop.

Too much fun.

You should have a TPU garage sale!
 
Holy sh*t CD, that's insane! :eek:

edit: mlee raises a valid point!
 
I am pretty much down to crap. I'vedecided to hang onto the ST rig and not upgrade and Te Techstation is my outlet :D. The Pile of parts has a home...And frankly it's more like pay for shipping and it's your's kind of stuff. I mean I have at least 3 dozen sata cables. I don't even keep IDE cables anymore...I've got a dozen Lian Li fans I have cut the leads off...a bazillion Chrome FingerGuards (120mm)....crap. I've got a deep drawer full of nothing but piecesof wire and anything that has a plug on it :p..it's all crap.

I should be on Dr. Phil like those PackRats. Two totes filled to overflowing with acrylic scraps.:twitch:
 
Holy crap I would toally rummage!!!!!!!
 
Back
Top