Report an Error

3dfx Voodoo5 5000 PCI

Graphics Processor
VSA-100 x2
Pixel Shaders
2 x2
Vertex Shaders
N/A
TMUs
2 x2
ROPs
2 x2
Memory Size
16 MB x2
Memory Type
SDR
Bus Width
128 bit x2
The Voodoo5 5000 PCI was a graphics card by 3dfx, that was never released. Built on the 250 nm process, and based on the VSA-100 graphics processor, in its Napalm 26-220 variant, the card supports DirectX 6.0. Since Voodoo5 5000 PCI does not support DirectX 11 or DirectX 12, it might not be able to run all the latest games. The VSA-100 graphics processor is an average sized chip with a die area of 112 mm² and 14 million transistors. Voodoo5 5000 PCI combines two graphics processors to increase performance. It features 2 pixel shaders and 0 vertex shaders, 2 texture mapping units, and 2 ROPs, per GPU. Due to the lack of unified shaders you will not be able to run recent games at all (which require unified shader/DX10+ support). 3dfx has paired 32 MB SDR memory with the Voodoo5 5000 PCI, which are connected using a 128-bit memory interface per GPU (each GPU manages 16 MB). The GPU is operating at a frequency of 166 MHz, memory is running at 166 MHz.
Being a single-slot card, the 3dfx Voodoo5 5000 PCI draws power from 1x Molex power connector, with power draw rated at 30 W maximum. Display outputs include: 1x VGA. Voodoo5 5000 PCI is connected to the rest of the system using a PCI interface.

Graphics Processor

GPU Name
VSA-100
GPU Variant
Napalm 26-220
(355-0026-220)
Architecture
Voodoo Scalable
Foundry
TSMC
Process Size
250 nm
Transistors
14 million
Die Size
112 mm²

Graphics Card

Release Date
Never Released
Generation
Voodoo5
Production
End-of-life
Bus Interface
PCI

Clock Speeds

GPU Clock
166 MHz
Memory Clock
166 MHz
166 MHz effective

Memory

Memory Size
16 MB
Memory Type
SDR
Memory Bus
128 bit
Bandwidth
2.656 GB/s

Render Config

Pixel Shaders
2
Vertex Shaders
0
TMUs
2
ROPs
2

Theoretical Performance

Pixel Rate
332.0 MPixel/s
Texture Rate
332.0 MTexel/s

Board Design

Slot Width
Single-slot
TDP
30 W
Suggested PSU
350 W
Outputs
1x VGA
Power Connectors
1x Molex
Board Number
210-0393-001

Graphics Features

DirectX
6.0
OpenGL
1.1
OpenCL
N/A
Vulkan
N/A
Pixel Shader
N/A
Vertex Shader
N/A