Thermal Grizzly Details WireView Pro II Extended GPU Warranty Conditions
Thermal Grizzly has published an FAQ clarifying the conditions of its WireView Pro II extended GPU warranty, covering cables, settings, adapters, and claims. Neither the USB cable nor the motherboard Y-splitter has to be connected for coverage. The Y-splitter lets the WireView shut the PC down through the power-button header, but Thermal Grizzly only recommends it. Monitoring has to stay enabled, though. Lowering the current, temperature, or power thresholds is fine, but raising them above the defaults or switching monitoring off is not.
Third-party extensions between the WireView and the GPU are allowed as long as each 12 V line stays separate. Adapters that bridge those lines internally stop the WireView from reading the current on each GPU power contact, so those builds aren't covered. A 90-degree connector isn't a problem by itself, since it comes down to the internal wiring. On the PSU side, cables approved for that exact PSU model are fine. Coverage runs for 24 months from the WireView purchase, even after the GPU's own warranty ends, but only for the original buyer with proof of purchase.
Third-party extensions between the WireView and the GPU are allowed as long as each 12 V line stays separate. Adapters that bridge those lines internally stop the WireView from reading the current on each GPU power contact, so those builds aren't covered. A 90-degree connector isn't a problem by itself, since it comes down to the internal wiring. On the PSU side, cables approved for that exact PSU model are fine. Coverage runs for 24 months from the WireView purchase, even after the GPU's own warranty ends, but only for the original buyer with proof of purchase.





