ASRock's Monster Hunter Wilds card looks great, the blue color theme works very well and matches the colors of the Arkveld monster in the game. The metal backplate has more MHW artwork and a cutout for air to flow through.
Here's a closeup of the backplate—good-looking, high-quality print.
Dimensions of the card are 29.5 x 13.0 cm, and it weighs 1160 g.
Installation requires three slots in your system. We measured the card's width to be 57 mm.
Display connectivity includes three standard DisplayPort 2.1a and one HDMI 2.1b port.
With RDNA 4, AMD put effort to improve its standing with game streamers and creative professionals. It's done this by giving Navi 48 a dual VCN solution, so the GPU has two concurrent hardware accelerators for encoding and decoding. Perhaps the biggest changes at the silicon level is that AMD improved the encoding quality of its hardware H.264 and HEVC codecs. This was a niche complaint streamers had with AMD GPUs, and would avoid the brand altogether. The company also updated its AV1 hardware acceleration with support for B-frames, which are frames that lack image information, but math data that let the decoder reconstruct image data by comparing with the image data from adjacent I-frames containing it. This technique vastly improves streaming bitrates since half the frames lack image data.
The card uses two 8-pin power connectors, which allow a maximum of 300 W power draw, plus 75 W from the slot. The board power limit is set to 304 W, with a manual adjustment range allowing up to 333 W.
Right next to the power inputs you can find a dedicated switch to turn off the RGB lighting—no software required. Below that sits a header that lets you sync the ARGB effects of the graphics card with the rest of your system.
ASRock has added an RGB illumination zone along the long edge, near the Arkveld logo.
Teardown
The ASRock cooling solution uses seven heatpipes. The heatsink provides cooling not only for the GPU, but also for the memory chips and VRM circuitry.
The backplate protects the PCB against damage during handling and installation. Here you can also see that the backplate metal surface is blue, not just a sticker.