When looking at the radiator on the Light Loop it is obvious that it sticks to the same design principles of most all-in-one liquid coolers. Be it size, shape, or FPI (fins-per-inch) which is 20, everything here is fairly typical. Even the tubing is essentially in the prototypical length at 400 mm. That said, there are a couple differences with be quiet!'s design. First the outside has a stamped design that adds a bit of visual flair over the typical smooth shell. The second is the fill port at the bottom that is hidden under a sticker, allowing you to refill the unit over time should you need to. While the former isn't a make-or-break inclusion it is still nice to see that attention to detail. However, the fill port is a different story. I applaud be quiet! for going this route since it should in theory give the unit a much longer life compared to 100% closed units. I will also make note here that while not perfect the various materials on this white version are fairly well-matched. While I can spot minor differences nothing stands out.
The pump design is not all that different from the usual but be quiet! did try and make it unique to them. First the top is semi transparent to allow the ARGB lighting to shine through and has an appearance similar to heatsink fins with the be quiet! logo in the middle. It looks fairly good, and it's a visual element that while unique won't clash with other components. Looking at the tubing and wiring both exit from the same area on the pump block with the tubing being fairly close and the wiring being stuffed in between. I would prefer the wiring exit elsewhere with more space between the swivel fittings as the current design is a bit limited regarding swivel range. While I don't see that being a major issue it is something I have seen cause issues with SFF builds. As for the cold plate it is nickel-plated copper and is slightly convex with no machining marks being visible on my sample.
The fans have a rated max CFM of 61.8 and a max RPM of 2100. They do feature ARGB LEDs with the fans being center hub illuminated rather than the outer frame. Considering the 9-blade design the fans are more of a hybrid design over pure airflow or static pressure.