Chieftec Iceberg PRO 360 DARK Review 0

Chieftec Iceberg PRO 360 DARK Review

Installation »

A Closer Look


Chieftec opted for a tried-and-true aluminium radiator for the Iceberg PRO 360 DARK. While not fancy by any means, it gets the job done. The fit and finish are spot-on, with the radiator looking pristine until I inevitably smudged it with fingerprints, but they were not as noticeable thanks to its matte textured finish. The 400 mm black tubing, while very stiff, is sleeved for a more refined appearance, with the fittings having an octagonal design. The radiator's fins-per-inch (FPI) came in at 19 to 20, which is pretty standard.


The pump features a centrifugal ARGB-illuminated VRM fan which should provide a great deal of airflow to the entire CPU socket. I am also happy to see the wiring for the VRM fan is separate from the pump itself and all the wiring is located away from the tubing. What is a bit interesting is that the tubing features roughly 45° swivel fittings. As for the copper cold plate, only minimal machining marks are visible, with the base itself being very slightly convex.


The fans are where Chieftec decided to be a bit different compared to their competition. One fan has the wiring harness for connecting to the motherboard. Meanwhile, the other fans have snap-on locking tabs that not only hold them together but also transfer power and the PWM signal for controlling speed, while keeping the wire mess to a minimum. As specified, the fans are rated to provide a max airflow of 64.72 CFM with a PWM RPM range of 500–2200. In general, I actually like the design features; the only downside is that there is no way to use the fans later on in other projects without a custom solution, but this isn't a huge deal.
Next Page »Installation
View as single page
Nov 16th, 2026 15:13 CST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts