Cougar Poseidon Vistek Pro ARGB 360 Review 4

Cougar Poseidon Vistek Pro ARGB 360 Review

Installation »

A Closer Look


Upon first glance you wouldn't likely notice it, but Cougar has opted for an entirely different radiator design with the Poseidon Vistek Pro ARGB 360. The aluminium radiator they are using keeps the typical exterior design of its peers but uses contoured right angle fins. Basically rather than fins that are slightly curved and touch the coolant pathways at a point, the UTTERIGHT fins make a 90° bend creating a larger contact patch for heat transfer. While I have seen similar designs in the past that was many years ago. It will be interesting to see if impacts performance. As for the radiator's FPI (fins-per-inch) I measured 18, which is a bit lower than the usual range of 20-21 FPI.

Moving on to the tubing it was nylon sleeved with a length of 390 mm according to Cougar which my own measurements on the review sample corroborate. As for the fittings, they have a gray color and a completely different look compared to the usual offerings. While you're not likely to be staring at them all that much I still enjoy the novelty of seeing unique design elements such as these. With the square look and rounded edges it adds a bit of contrast and uniqueness that you typically don't see on an AIO.


The pump block has a recessed area for the 3.95" IPS display to sit in and is held firmly in place via magnets. As for the swivel fittings they have the same unique look as the ones on the radiator, which is a nice touch. Meanwhile, the wiring for the display and pump exit the housing between the two fittings. Since the wires sit low enough they won't cause any issues with overall range of motion. Finally, the copper cold plate has a slightly convex shape with only the faintest of machining marks being visible.


Cougar really looks to set themselves apart with the Unity ARGB 360 fan setup. All three 120 mm fans are enclosed in a singular frame to simplify wiring and installation. While the fans themselves are illuminated there is also an ARGB strip down the side of the frame as well, for added visual flair. As for the specifications the fans are listed to have an RPM range of 700–2500 RPM while moving 78.2 CFM of air at a noise level of 38 dBA.
Next Page »Installation
View as single page
Nov 19th, 2026 01:33 PST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts