A Closer Look
The C5 cu is much heavier than you might expect given its small size which is partly due to the pure copper construction. In terms of the heatsink design it's relatively conventional on the surface since it consists of 61 copper fins. Where it differs from other designs is the use of a vapor chamber base rather than a copper base, with heatpipes that conduct heat to the fins. This makes the entire design crisp and clean to say the least.
To allow the fan to securely hook onto the heatsink there are two lips protruding from the copper fins on each side which let the fan snap down onto the heatsink, making for an effective fan mount without the need for extra screws or clips, again further keeping the overall design visually appealing. Even the copper with no fancy coating or plating has a unique charm of its own.
Looking down from the top the fins are straight with no unique patterns and only some folded tabs to keep the spacing consistent. Meanwhile, the vapor chamber base has a unique crosshatch like pattern with a slightly convex design. Furthermore, while the pattern is visible it feels smooth to the touch. That was a bit strange, since visually its striking enough in that you expect it to have a noticeable difference in feel, but that is not the case.
When it comes to the fan CRYORIG is using a 97 x 97 x 31 mm fan with a max RPM of 3200 and a max CFM of 51.81. No identifiable model number was found. That said, it does have cutouts in the sides of the fan frame which do allow for airflow that can radiate outwards to help with cooling for system memory and the VRMs, to a minor extent.