VRM Overview
It's always a little concerning with lighting paraphernalia sat on top of the VRM heatsinks hindering airflow, but the 16+2+2 power phase design was kept fairly cool, only peaking above 60°C on one section, with the other areas sitting below. This was with minimal airflow over the VRMs too in a worst case scenario so even a modestly-cooled case should see better results, and it's good to see those attractive heatsinks aren't a case of form over function either.
The rear backplate cools both banks of VRMs and also the rear of the chipsets too. The VRM heatsinks are linked using a heatpipe, and we can see the large thermal pad linking them to the USB4 controller heatsink below.
The VRMs are a significant climb down from the 90 A phases on the X870E Aorus Pro X3D Ice. In fact, it's the lower-end stages it used for MISC that we find across the board for the 16 vCore and two SOC stages here in the form of OnSemi NCP 302155R 60 A stages, with MISC here using two more of them.
There are two PWM controllers, both from Richtek - the RT3672EE and RT3678BE.