ID-Cooling Zoomflow 240 Review 4

ID-Cooling Zoomflow 240 Review

A Closer Look »

Packaging


The packaging ID-Cooling uses is quite large, measuring in at 40.3 cm long, 21.2 cm wide, and 13.7 cm tall. On the front, you will find the Zoomflow 240 front and center, along with its RGB sync support and a mention of a few of its features, such as its premium sleeved tubing, high performance pump, and addressable LEDs that work with MSI Mystic Light and ASUS Aura sync. Looking at the side, you will just see the product and company names with an RGB circle. If you were not aware of it by now, it is in fact RGB/LED-equipped. Once flipped over to the back, you will find the specifications and supported sockets listed, which just so happens to include AMD's TR4.


On the right side we find a similar design as on the left. The only major difference is that the left side has the barcode, while the right lists the addressable LEDs and supported motherboard software. Mechanical drawings on the top list the unit's measurements for the pump and radiator. Flipping it over and checking the bottom, users will find the Zoomflow 240's various features in multiple languages.

Contents


Unlike ID-Cooling's Daskflow 360 which comes in a foam enclosure within the box, the Zoomflow 240 comes in a typical cardboard shell with a piece of foam on top. While I am a sucker for good packaging, having reviewed numerous all-in-one liquid coolers, this packaging has proven more than adequate thus far.


Like most liquid coolers, the Zoomflow 240 offers support for every modern socket you can think of, including AMD's TR4 socket, which was a surprise, to say the least. ID-Cooling has also made sure to cover their bases in regards to RGB LED support with both an RF remote and motherboard software support. This gives users options and allows for the cooler to function in any system.

Common parts supplied for mounting include:
  • 8x Radiator fan screws
  • 8x Radiator screws
  • 4x Mounting nuts
  • 4x Threaded standoffs
  • 4x Backplate screws
  • 4x Insulating washers
  • 4x LGA 2011 thumb screws
  • 4x Phillips-head nuts
  • 2x 120 mm RGB fans
  • 1x Intel mounting bracket
  • 1x AMD mounting bracket
  • 1x Tube of thermal paste
  • 1x Backplate
  • 1x PWM splitter
  • 1x Pre-filled liquid cooler
  • 1x User's manual
  • 1x RGB splitter
  • 1x RGB power cable and receiver
  • 1x RGB remote
Next Page »A Closer Look