Packaging
The Card
MSI has refreshed their Expert theme slightly, it looks extremely nice. Both the main cooler shroud and the backplate are made from high-quality metal with a nice matte gold surface texture. The cooler is designed so that hot air gets exhausted out of the card by the back fan and the front fan pulls air through the card.
Dimensions of the card are 32.0 x 15.0 cm, and it weighs 1885 g.
Installation requires three slots in your system. We measured the card's width to be 58 mm.
Display connectivity includes three standard DisplayPort 2.1b and one HDMI 2.1b.
All GeForce RTX 50-series Blackwell cards feature a new display engine supporting DisplayPort 2.1b with UHBR20, as well as HDMI 2.1a. Both interfaces support DSC (display stream compression). With DSC enabled, a single DisplayPort on this card can drive 4K 12-bit HDR at 480 Hz; or 8K 12-bit HDR at up to 165 Hz. The RTX 5080 features an updated media acceleration engine with support for 4:2:2 video formats, AV1 UHQ, and MV-HEVC. There are two independent NVENC and NVDEC units.
The card uses a single 16-pin connector, which allows a maximum power draw of 600 W, but the board power limit is set much lower of course, at 360 W, with a manual adjustment range allowing up to 400 W.
There is no lighting on the MSI RTX 5080 Expert.
Teardown
The card consists of three main pieces. The front golden cooler shroud, the PCB and heatsink assembly in the middle, and the black backplate. You can remove both outer components while the main heatsink remains in place—this is great for maintenance.
MSI's cooler shroud is made from metal and looks fantastic. I like the subtle details and robust build, which makes the card feel nearly indestructible.
MSI's thermal solution uses seven heatpipes and a vapor-chamber (the seventh heatpipe is a short one that goes towards the left on the second picture above. The heatsink assembly provides cooling not only for the GPU, but also for the memory chips and VRM circuitry.
The backplate is built from thick metal, too, like the cooler shroud. It protects against damage during installation and handling.