MSI's design choices for the MPG CORELIQUID P13 360's aluminium radiator are a bit different from the norm. The textured finish doesn't end up covered in fingerprints and adds a unique feel when handled. While this doesn't enhance performance, it does leave a favorable impression. The tubing is roughly 395 mm of sleeved EPDM rubber, which is durable and flexible. The black fittings have a matte finish much like the radiator. As for fin density the MPG CORELIQUID P13 360 is prototypical at 20 FPI (fins-per-inch).
The pump has a curved glass top with a 2.1" IPS display that has a resolution of 480 x 480 pixels and a peak brightness of 600 nits. Looking at the swivel fittings they have a good range of motion with the wiring for the pump and display being routed behind the sleeving to the radiator, helping mitigate cable clutter around the CPU socket. Meanwhile, the full-plane and screwless copper base, while slightly convex, is smooth to the touch. However, my sample had a sticky residue left over from the protective film which required cleaning with isopropyl alcohol to remove.
This AIO utilizes MSI's CycloBlade 9 fans which have a CFM rating of 64.89 and a PWM RPM range of 500-2050. They also use a rifle bearing which has a life expectancy of 40,000 hours at 40°C. As you may have guessed from the name it has 9 blades, with all of them joined together via an outer ring. The fans are also daisy-chained together and while the connector is non-standard it does terminate into standard connectors.