Packaging and Accessories

Noctua sent over a few different SKUs of the NF-A12x25 G2, although I suspect what most people will go for is the one pictured above—a single fan with PWM control. It ships in a relatively large product box adorned with traditional Noctua colors, with the product name and a render of the fan on the front to go with salient features listed. A blurb about the various tech that has gone into the making of the fan is seen on the back, along with a P-Q curve that helps compare this to the predecessor at a few different typical airflow impedance sources. Noctua doesn't include a manual—not that you really need one—albeit a QR code on the inside leads you to an online one going over the accessories and installation. Here we also see the fan right away, with the accessories neatly packed in a separate cardboard box to the side.


This might be the first time I have received a fan which comes with a protective strip of cardboard placed in the thin gap between the rotor and the inner frame. While I know this is to help prevent any mishaps during shipping, it also does an excellent job of showcasing just how small that gap is, given this circular piece is quite thin. The accessory box comes overloaded with quite a few things, including an anti-vibration rubber gasket that helps seal the fan when up against a radiator, for example. It has nibs that are inserted into each of the four corners on the fan, which help with keeping it in place even before the fan is screwed in, so I appreciate this small and user-friendly touch. We also get four rubber mounts when using this as a case fan, and these more than suffice in keeping the fan in place when used correctly. There are four self-tapping metal screws too if you prefer the old-fashioned route. Helping justify the price point are also three cables—a 30 cm long extension cable, 4-pin Y-splitter cable, and a low-noise adapter (LNA) which reduces the rated speed of the fan from 1800 RPM to 1500 RPM, presumably via an in-line resistor. This is handy for those wanting a slightly quieter fan that you simply connect the power to and not bother with fan control thereafter, although these days motherboard manufacturers make fan control so simple and mostly automated anyway. All included cables come sleeved in a heatshrink application with all-black sleeving and terminals and a label I would rather Noctua not add, since it takes things more to where it is an ad rather than a means of brand recognition inside of one's PC.


If 1500 RPM is still too much for you, Noctua also makes a low speed version aptly named the NF-A12x25 G2 LS-PWM. The fan and unboxing experience is the exact same as the regular version, except the motor is now re-worked to run at a maximum rated speed of 1100 RPM which then goes down to 850 RPM with the low-noise adapter. More interesting to me, however, is the NF-A12x25 G2 PWM Sx2-PP. It's a mouthful to type and say out loud, and yet this is not just a two-fan SKU. The fans inside are deliberately set to have one be offset by ~50 RPM from the other at 100% PWM duty cycle, meaning one fan will spin at 1800 RPM max and the other at 1750 RPM. This can be beneficial to reduce the negative effects of standing acoustic waves and vibrations, especially if you plan to use these fans in push-pull or even next to each other on a radiator. When I first saw this at Computex, I was skeptical given fans tend to have an operating speed that can be beyond 50 RPM from the rated value at most PWM duty cycles. However, Noctua claims the NF-A12x25 G2—as with the NF-A14x12 G2 before—has extremely accurate and precise RPM control for every single fan to help make this feature not only realistic, but also desirable for those who prioritize optimizing not just absolute sound levels, but also the sound signature itself.