Sandisk is one of the most established names in the NAND flash industry, with decades of experience developing storage technologies for both consumer and enterprise markets. Leveraging its long-standing partnership with Kioxia and its advanced BiCS NAND technology, the company continues to deliver high-performance SSD solutions that combine strong reliability, efficient power consumption, and competitive performance for modern datacenter workloads.
The Sandisk SN861 series represents the company's high-performance PCIe 5.0 x4 enterprise SSD lineup, available in both 1-DWPD and 3-DWPD endurance variants under the same SN861 family. This generation is built around FADU's FC5161 controller and Sandisk's own NAND flash, utilizing 512 Gb Sandisk BiCS6 TLC (FXZ5 512G) dies rather than the company's newer BiCS8 TLC 512 Gbit or 1 Tbit generation. Despite using an earlier NAND architecture, the SN861 is designed to deliver the high performance, low latency, and reliability expected from modern datacenter SSDs.
Sandisk introduced ago the SN862 a few weeks ago, a refresh of the same enterprise compute platform that incorporates newer BiCS8 NAND and DDR5 DRAM. According to Sandisk, the SN862 maintains the same level of performance as the SN861 while providing improved power efficiency, with the newer NAND contributing to these gains. The SN862 was showcased at the Future of Memory & Storage event.
The SN861 lineup is currently available in several capacities and form factors, split across both endurance classes. The 1-DWPD models are offered in 1.92 TB, 3.84 TB, and 7.68 TB in the U.2 form factor, while the 3-DWPD variants are available in 1.6 TB, 3.2 TB, and 6.4 TB capacities. The SN861 is also available in E1.S and E3.S form factors, although these variants are offered exclusively in the 1-DWPD configuration. The E1.S models range from 0.96 TB to 15.36 TB, with 0.96 TB, 1.92 TB, 3.84 TB, 7.68 TB, and 15.36 TB capacities, while the E3.S models are available in 1.92 TB, 3.84 TB, 7.68 TB, and 15.36 TB capacities. Unfortunately, obtaining accurate pricing for enterprise SSDs such as the SN861 remains extremely challenging due to the strong demand within the datacenter market. As a result, manufacturers are often unable to provide stable retail pricing, and publicly available listings vary widely, ranging from approximately $3,900 to as much as $8,000, depending on the seller and configuration. However, enterprise customers purchasing directly from the manufacturer or placing large-volume B2B orders can typically secure significantly lower pricing per unit.
As expected, the 1-DWPD models are rated for 3,504 TB, 7,008 TB, and 14,016 TB of total bytes written (TBW) for the 1.92 TB, 3.84 TB, and 7.68 TB capacities, respectively. Meanwhile, the 3-DWPD variants offer substantially higher endurance ratings of 8,760 TB, 17,520 TB, and 35,040 TB, making them better suited for write-intensive enterprise workloads. Naturally, these higher-endurance models also command a higher MSRP due to the additional over-provisioning and increased write durability.