Thermal Grizzly DeltaMate CPU Block - MPII Review 10

Thermal Grizzly DeltaMate CPU Block - MPII Review

Closer Examination »

Packaging and Accessories


While not necessarily adhering to the physical prettiness, if you will, of a retail unit, Thermal Grizzly was kind enough to provide me with a complete retail kit, so I can show everyone what a paying customer will receive. The product box is clean and minimalist, with a black banderole over the cardboard and a wrapper that has the product name on the front and specifications in multiple languages listed on the back. The box itself comes adorned with the red Thermal Grizzly logo as well, and opens from the side where we see a double flap helping secure the contents in place during transit. Opening the box immediately shows this is not your typical CPU block, as this is the first time in over 300 different water block reviews that I have seen a handwritten note confirming a leak check being done on this particular unit. To be clear, this isn't unique to Thermal Grizzly. All reputable brands do rudimentary leak testing, usually at the factory the blocks are assembled at, yet this helps add confidence in the product and doesn't add much cost. Accompanying this is a multi-language user manual (online copy here) which goes over the installation of the block. A thank you note with customer support information rounds up the first layer inside the box.


Remove the thin foam sheet and you will see a thicker one. This time, it has two compartments to snugly hold a generous 6 g tube of Thermal Grizzly Duronaut thermal paste and the CPU block itself. The block is substantial in both mass and volume, so be careful when taking it out. You may also experience something here that could surprise you, but more on that later. The gaps around the tube and block help remove these easily, and also lift this layer to access the bottom compartment that houses the remaining accessories.


The installation hardware includes a zip-lock bag containing two sets of different thickness plastic washers, a CPU socket backplate for Intel LGA 1700/1851, a 2 mm Allen key, a 2.5 mm Allen key, four knurled metal locking nuts, four steel springs, and four UNC 6-32 standoff screws. Based on the product page and manual, the retail units should be shipping with only one set of four M4 plastic washers, but you will in fact use both sets as seen later. We also get a spreader tool to use with the thermal paste, which is a nice touch.
Next Page »Closer Examination
View as single page
Nov 18th, 2026 15:59 PST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts