Thursday, May 30th 2013

ASUS Launches PQ321 Monitor with 3840 x 2160 IGZO Display

ASUS today announced the PQ321 True 4K UHD Monitor, a desktop display with a stunning Ultra HD 3840 x 2160 resolution that's equivalent to four Full HD displays stacked side-by-side. The PQ321 has a 31.5-inch LED-backlit 4K Ultra HD display (140 pixels-per-inch) with 16:9 aspect ratio, and supports 10-bit RGB 'deep color' for vibrant images with more natural transitions between hues.
Cutting-edge IGZO panel technology
The ASUS PQ321 True 4K UHD Monitor uses cutting-edge Indium Gallium Zinc Oxide (IGZO) rather than traditional amorphous silicon for the active layer of its LCD panel. IGZO panels support much smaller transistors than amorphous silicon, which in turn gives much smaller pixels and the 3840 x 2160 resolution of the PQ321 is four times that of a 1920 x 1080 Full HD display.

176-degree wide viewing angles on both vertical and horizontal planes minimize onscreen color shift, while the 350cd/m² brightness rating and 8ms gray-to-gray response time ensure smooth, bright, and vibrant moving visuals. IGZO technology also gives reduced energy consumption compared to amorphous silicon and reduces bulk - at 35mm at its thickest point, the PQ321 is the thinnest 4K UHD monitor available today.

Comprehensive video inputs for UHD content
The ASUS PQ321 True 4K UHD Monitor features DisplayPort and US models offer dual-HDMI ports inputs with Picture-by-Picture support. Built-in 2W stereo speakers remove the need for additional desktop clutter and, in addition to being wall-mountable, the monitor stand offers full height, swivel, and tilt adjustment.

AVAILABILITY & PRICING
ASUS will be exhibiting the 39-inch and 31.5-inch True 4K UHD Monitor models at Computex 2013 in Taipei.
Add your own comment

81 Comments on ASUS Launches PQ321 Monitor with 3840 x 2160 IGZO Display

#51
Steevo
People only believe that as they also believe the artificially implemented limitations of hardware and software to prevent users from doing what they want on a mac is a "feature", and occasionally what they don't mean to (no video drivers installed and a 1024X768 display resolution on a 23" 1080 panel, I have seen it. After fixing it the person complained that "I moved their icons" and "Why are the items so tiny!!" makes a PC bad. Right click on desktop and change your setups, windows has allowed it for longer than many were out of diapers.
Posted on Reply
#53
MadMan007
FrickWhat about cheap 2560 x 1600/1440???? :(
Under $600 isn't cheap enough for you for an IPS panel with 2560x1440 resolution? The Dell U2713HM is regularly available at $600 and has been $550 a few times.
Posted on Reply
#54
Frick
Fishfaced Nincompoop
JDG1980In response to Frick and McSteel: Yes, there are definitely issues with DPI scaling on Windows, but the problems aren't with the OS itself. Windows 7 scales just fine, as does IE and almost all the other stuff built into Windows. The problem is with ill-behaved third-party applications. If 4K monitors start to become commonplace, there will be pressure on these vendors to fix their applications to be DPI-aware (Microsoft has actually been urging them to do it for years, but most haven't). Adobe Lightroom 5 now does DPI scaling properly and Adobe claims that Photoshop will be updated to do so in the not-too-distant future.
Yeah well yes and no. The Windows 7 log in screen for example doesn't scale at all. At least the last time I tried (Win7 SP1) there were some elements that didn't look right. And as others have said, the major advantage of Windows is the software library. You can run anything. Some, not all, major applications works fine, others don't. Look at these images, it's Chrome and Firefox. FF renders the site in the middle of everything, Chrome is fuzzy all over. Yes those things are probably pretty easily fixed for the devs, and the probably will be, but still. Now multiply that for every program (well most programs anyway) ever written for Windows and you see the problem.
MadMan007Under $600 isn't cheap enough for you for an IPS panel with 2560x1440 resolution? The Dell U2713HM is regularly available at $600 and has been $550 a few times.
Not really no. It's a good price, but I want TN monitors to get to $200. Seriously, we've had 1080p for ages now.
Posted on Reply
#55
pokazene_maslo
3D support

I hope that this display will support passive 3D (the one where even lines are polarized in one direction and odd lines in other direction).
Posted on Reply
#56
buggalugs
Res looks great but response time doesn't. No good having a high res monitor if your gaming is blurry. Will need to see a proper review of its gaming performance.

The other thing is, not sure I would pay top dollar for 4K right now, with OLED coming soon.
Posted on Reply
#57
midnightoil
bencrutzother than the fact that IGZO uses rare earth mineral that most likely it will sustain it's high price? no, i don't :roll:
This is an IPS monitor. As mentioned in the article, IZGO refers to what the active layer is physically made from, not the type of LCD.

As for those speculating that this will be 'cheap' compared with the Sharp ... absolutely not. This is the Sharp monitor. It's exactly the same panel (made by Sharp), possibly with different backlighting (though I doubt it) and a different case and OSD software. You might see it 20% cheaper, but I doubt even that unless these units are many pegs lower on QC scale.

P.S. IZGO has been said to be able to improve pixel responsiveness significantly, so I'm more excited to see if some 'real' 120+hz IPS monitors finally appear. Then I'd finally be able to use one monitor for producivity / gaming AND photo editing. Such a pain to use TN for the former and IPS for the latter.
Posted on Reply
#58
nemesis.ie
And a 39"?

Did anyone else notice at the very end they will also be exhibiting a 39" model?

Now THAT sounds tempting, but +1 for the 120Hz/BL strobing.

I also wonder if this will have that fancy "moth eye" anti-glare and RGBY pixels Sharp has developed, if not, a 4k Sharp TV might be even better, e.g. a 50" pushed to the back of the desk ... droool.
Posted on Reply
#60
radrok
Let's hope they don't go overly aggressive with the anti-glare coat.

10bit panel, good.

Count me in for one if it's under 2,5k.
Posted on Reply
#61
McSteel
10bit panel means jack with a standard gamut backlight...
Posted on Reply
#63
NdMk2o1o
FrickWhat about cheap 2560 x 1600/1440???? :(
Shimian/Catleap , problem solved :toast:

I'm gonna need a magnifying glass to use this thing as already on a 27" 1440p monitor I have to increase the DPI to 115% and set internet browsing at 135% zoom just so I'm not straining, do I do sit back about 3 feet from the monitor if that makes a difference, think I need an eyetest, always had perfect eyesight but sitting at bright monitors for the last 10 years has definitely had an effect on them :( anyway, I digress...
Posted on Reply
#64
midnightoil
NdMk2o1oShimian/Catleap , problem solved :toast:

I'm gonna need a magnifying glass to use this thing as already on a 27" 1440p monitor I have to increase the DPI to 115% and set internet browsing at 135% zoom just so I'm not straining, do I do sit back about 3 feet from the monitor if that makes a difference, think I need an eyetest, always had perfect eyesight but sitting at bright monitors for the last 10 years has definitely had an effect on them :( anyway, I digress...
Reduce the brightness significantly, I suggest. Not only is it better for your eyes, but you won't squint / narrow your pupils so much and text / details will seem much clearer.

I sit about 2 feet from a 23" 1920x1080 and usually zoom out 2-3 steps from default on most webpages (I don't fiddle with global settings).
Posted on Reply
#65
NdMk2o1o
midnightoilReduce the brightness significantly, I suggest. Not only is it better for your eyes, but you won't squint / narrow your pupils so much and text / details will seem much clearer.

I sit about 2 feet from a 23" 1920x1080 and usually zoom out 2-3 steps from default on most webpages (I don't fiddle with global settings).
I have decreased the brightness as at factory default it can literally light up a dark room, the problem with that is that colours then become washed, white being the most prominent and ends up looking a slightly washed out grey tint, my chairs a recliner and I like to lean back on it as it's comfy lol if I sat up I would be about 2 feet from it and could easily deal with standard DPI though that extra 1 foot away from it really makes it hard trying to make out text.
Posted on Reply
#66
Frick
Fishfaced Nincompoop
NdMk2o1oShimian/Catleap , problem solved :toast:

I'm gonna need a magnifying glass to use this thing as already on a 27" 1440p monitor I have to increase the DPI to 115% and set internet browsing at 135% zoom just so I'm not straining, do I do sit back about 3 feet from the monitor if that makes a difference, think I need an eyetest, always had perfect eyesight but sitting at bright monitors for the last 10 years has definitely had an effect on them :( anyway, I digress...
Doesnt exist in sweden and with monitors i want to go as local as possible.
Posted on Reply
#67
NdMk2o1o
FrickDoesnt exist in sweden and with monitors i want to go as local as possible.
I bought from Korea as have most others with these monitors and most speak highly of the quality and sellers etc though if you only buy local that's your prerogative and I respect that, just don't think 1440p/1600p monitors will be cheap in the western world anytime soon, let alone these beasts when they come out, though hopefully we will see more mfr's follow suit with 4k displays :toast:
Posted on Reply
#68
Brusfantomet
FrickDoesnt exist in sweden and with monitors i want to go as local as possible.
Check dustin, they have a Dell U2713HM for 4000 nok (680 usd, but that includes 25% VAT) for the last couple of weeks.
Mabanaccessories: RS-232V conversion cable
Now that is not quite normal accessories for a consumer display.
midnightoilThis is an IPS monitor. As mentioned in the article, IZGO refers to what the active layer is physically made from, not the type of LCD.

As for those speculating that this will be 'cheap' compared with the Sharp ... absolutely not. This is the Sharp monitor. It's exactly the same panel (made by Sharp), possibly with different backlighting (though I doubt it) and a different case and OSD software. You might see it 20% cheaper, but I doubt even that unless these units are many pegs lower on QC scale.

P.S. IZGO has been said to be able to improve pixel responsiveness significantly, so I'm more excited to see if some 'real' 120+hz IPS monitors finally appear. Then I'd finally be able to use one monitor for producivity / gaming AND photo editing. Such a pain to use TN for the former and IPS for the latter.
Ok, so it is a ISP, was a bit confused with the viewing angels at only 178 degrees as opposed to 179.

and you are saying minimum 4000 USD as launch price? That could bee a bit steep

120Hz IPS, this screen is only getting better.
Posted on Reply
#69
Frick
Fishfaced Nincompoop
NdMk2o1oI bought from Korea as have most others with these monitors and most speak highly of the quality and sellers etc though if you only buy local that's your prerogative and I respect that, just don't think 1440p/1600p monitors will be cheap in the western world anytime soon, let alone these beasts when they come out, though hopefully we will see more mfr's follow suit with 4k displays :toast:
I just don't see what the holdup is. When Apple bought along their "retina" stuff I thought the rest of the market would follow pretty soon, but nooooo. Instead more 1920 x 1200 monitor have come out again, which is just weird.
BrusfantometCheck dustin, they have a Dell U2713HM for 4000 nok (680 usd, but that includes 25% VAT) for the last couple of weeks.
It's 4390SEK as of now, and it is a good price for that monitor, but I want a regular old TN panel for 2500SEK. :(

There is a new one though, the PHILIPS 272C4QPJKAB, which is less than 4000SEK (€430).. Hmm.. Getting there..
Posted on Reply
#70
jihadjoe
FrustratedGarrettWhen are we gonna get back-light strobing displays. Even at 60Hz, motion picture would look a lot clearer than a 120Hz monitor without strobed back-light.
A strobe at 60Hz would be a bad idea. It'd eliminate ghosting, but then it would also flicker like an old CRT.

Pixel persistence is the main reason 60Hz is considered acceptable for LCDs, whereas back in the day you pretty much had to aim for at least 85Hz if you were going to be staring at the screen for long amounts of time.
Posted on Reply
#71
Prima.Vera
Refresh rate for LCDs and refresh rate for CRTs are like comparing lemons with melons.
Posted on Reply
#72
McSteel
He isn't. He's comparing CRT electron beam scanning with LCD backlight strobe and makes no mistakes in doing so. This is what BL strobe looks like, and it's exactly like what the CRT monitors do, to the human eye.
Posted on Reply
#74
Prima.Vera
McSteelHe isn't. He's comparing CRT electron beam scanning with LCD backlight strobe and makes no mistakes in doing so. This is what BL strobe looks like, and it's exactly like what the CRT monitors do, to the human eye.
Is similar but not exactly. CRT and LCD are completely different technologies. There are physical limitations in place here, common.
Posted on Reply
Add your own comment
Apr 19th, 2024 23:39 EDT change timezone

New Forum Posts

Popular Reviews

Controversial News Posts