Wednesday, April 13th 2016

Phanteks Announces the PowerCombo - Power Your Rig with 2 PSUs

Phanteks today announces the release of their patented Power Combo. The Power Combo is design to maximize your power output by allowing you to connect two power supplies. The Power Combo will be a true plug and play that requires no splicing and cutting of the wires. The Power Combo is design to be safe and secure. The Power Combo features a redundant power supply architecture concept, this prevents the system from shutting down when one power supply fails. This ensures that all your vital information and data will not be interrupted or lost.

The Power Combo can run high end systems that requires more power output by combining 2x top tier PSUs. The Power Combo is fully compatible to Mini ITX, mATX, ATX, and E-ATX motherboards. The Power Combo features a unique soft start circuit that limits the inrush current to help improve stability and reduce transient voltage drops. The Power Combo will help share the load current of the two power supply and improve the power efficiency. The Power Combo is cost efficient and provides maximum power and efficiency.
Available from April 2016, The Power Combo will be priced at €39.90.
Add your own comment

30 Comments on Phanteks Announces the PowerCombo - Power Your Rig with 2 PSUs

#26
RCoon
EarthDogGeez, missed that it was only 24 pin and CPU 8 pin.... wow
I tweeted them for clarification, otherwise its just a bold faced lie.
Posted on Reply
#27
newtekie1
Semi-Retired Folder
BreitNo, not really. It is more like bringing both PSUs together to act like one (and switching on at the same time). All the auxilliary power connectors (PCIe, SATA, 4-pin Molex) can then be directly used from each PSU. For instance four PCIe 8-pin going from the first PSU into the first two GPUs and then another four PCIe 8-pin cables goinig from the second PSU into the other two GPUs in a Quad-SLI setup.
Yeah, but there have been ways to do that for years. This cable is $15, why would I spend $50 for Phanteks' box?

Heck, this cable is $20 and lets you connect 4 PSUs at once!
Posted on Reply
#28
brian@phanteks
How does the redundancy feature work?



Phanteks’ Power Combo allows two power supplies to combine power to one motherboard. If one of the power supply(A) units develops an internal fault or fails, the working power supply(B) unit automatically takes over and bypass the malfunctioning main circuit of the failed power supply(A) and supplies the load to the Sata and PCI-e devices. In other words, the input (A) on the Power Combo will automatically function as an output (A).


The Power Combo redundancy allows uninterrupted system operation in the event of failure to one of the power supply. This allows the system to be powered up, but only if the available power of the working power supply is higher than the required power from the system.





When a failure occurs in one of the power supply, the status is communicated by:

-The Power Combo’s indicator light changes from white to red.


Which scenarios could cause the Power Combo’s redundancy feature not to work?

In most cases of power supply failures, the power supply’s protection will activate on the main circuit and the Power combo’s redundancy feature is able to keep your system in operation. As long as PSU(B) has sufficient power to supply your PC systems on its own. There are some rare scenarios when the PSU(B) won’t be able to power the devices that are connected to PSU(A). Examples:


1. Water damage to the PSU.

This could cause short-circuit on the entire board (including the connectors unit).

2. When short-circuit occurs in the connected cables (faulty cables)
Posted on Reply
#29
RCoon
brian@phanteksHow does the redundancy feature work?



Phanteks’ Power Combo allows two power supplies to combine power to one motherboard. If one of the power supply(A) units develops an internal fault or fails, the working power supply(B) unit automatically takes over and bypass the malfunctioning main circuit of the failed power supply(A) and supplies the load to the Sata and PCI-e devices. In other words, the input (A) on the Power Combo will automatically function as an output (A).


The Power Combo redundancy allows uninterrupted system operation in the event of failure to one of the power supply. This allows the system to be powered up, but only if the available power of the working power supply is higher than the required power from the system.





When a failure occurs in one of the power supply, the status is communicated by:

-The Power Combo’s indicator light changes from white to red.


Which scenarios could cause the Power Combo’s redundancy feature not to work?

In most cases of power supply failures, the power supply’s protection will activate on the main circuit and the Power combo’s redundancy feature is able to keep your system in operation. As long as PSU(B) has sufficient power to supply your PC systems on its own. There are some rare scenarios when the PSU(B) won’t be able to power the devices that are connected to PSU(A). Examples:


1. Water damage to the PSU.

This could cause short-circuit on the entire board (including the connectors unit).

2. When short-circuit occurs in the connected cables (faulty cables)
I recommend you include this information in your press releases next time. Seems like a rather huge piece of information to inconveniently miss out. Might save your PR people having to make forum accounts to explain a product after-the-fact.
Posted on Reply
#30
cdawall
where the hell are my stars
One just hopes that both powersupplies have internal shunts...
Posted on Reply
Add your own comment
Nov 21st, 2026 04:27 PST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts