Monday, September 17th 2018

AMD Ryzen Embedded V1000 Processor to Power SMACH Z Handheld Gaming PC

Remember the SMACH Z? Me neither. It was a long attempt in the making, with multiple Kickstarter campaigns that finally resulted in an actual product coming to market later this year. The SMACH Z is a handheld gaming PC with an x86 processor, that was originally supposed to use a 5" 720p screen powered off an AMD G-series SoC (System on a Chip). It was then updated to use an AMD Merlin Falcon (Excavator) R-Series RX-421BD clocked at 2.1 GHz SoC with an integrated Radeon R7 series GPU at 800 MHz to run a 6" 1080p display, that was in turn embedded in a handheld gaming console, effectively making it a portable gaming PC. Perhaps it was a good thing that the product took its time, since they have now decided to use updated internals for the final product- once more from AMD- in the form of the Ryzen Embedded V1605B SoC with AMD Radeon Vega 8 graphics.

eBOM reports that AMD has announced it will be showcasing the SMACH Z in their booth presence at the Tokyo Game Show which commences later this week. This marks yet another gaming platform that AMD will be powering, although it is less powerful than the other ones. The SMACH Z isavailable for pre-order in three different variants (Z, Z Pro, and Z Ultra) which have different starting configurations, but can be customized as with most pre-built PCs. All variants can run off the Linux-based SMACH OS or Windows 10, retain the 6" 1080p touch screen, support up to 16 GB of dual channel DDR4 memory and 256 GB of solid state storage, and have an optional camera as well. Prices begin at $699 and go up to $1199, with a 10% discount for pre-order for the console expected to be available December, 2018. For those interested, there are some preliminary benchmarks released by SMACH from earlier this year.
Source: eBOM
Add your own comment

56 Comments on AMD Ryzen Embedded V1000 Processor to Power SMACH Z Handheld Gaming PC

#26
king of swag187
lexluthermiesterNot sure where all this "vaporware" talk is coming from, but I'd love to have one.
This has been proven to be a scam multiple times over
Posted on Reply
#27
lexluthermiester
So AMD's faking it then? That's what you're all going with? Think that over for a few more minutes..
Posted on Reply
#29
silentbogo
lexluthermiesterSo AMD's faking it then? That's what you're all going with? Think that over for a few more minutes..
We'll just have to wait and see. TGS starts tomorrow.
king of swag187I'm not seeing what your seeing, let me back up. The actual product being talked about, the Smach Z, not the APU, has been proven many times over to be a scam. The V1000 exists and L1Techs have even done a video on it
level1techs.com/video/amd-v1000-embedded-sapphire-fs-fp5v-exclusive-first-look
What he meant, is that AMD made a press-release (a weird one, cause there is no word on either AMD or Smach websites) that they are attending Tokyo Game Show 2018. Supposedly they are showcasing Smach as a part of OpenPC tech.
Not sure if it makes it to the livestream, but some sort of info must pop-up somewhere afterwards.
Posted on Reply
#30
lexluthermiester
king of swag187I'm not seeing what your seeing, let me back up. The actual product being talked about, the Smach Z, not the APU, has been proven many times over to be a scam. The V1000 exists and L1Techs have even done a video on it
level1techs.com/video/amd-v1000-embedded-sapphire-fs-fp5v-exclusive-first-look
Oh, ok. Let's review;
VSGAMD has announced it will be showcasing the SMACH Z in their booth presence at the Tokyo Game Show which commences later this week.
Yup, that's what it says. Hmm...
Posted on Reply
#31
king of swag187
Except, its been proven to be fake. So again, how could that even be possible?



There we go. Even if they somehow have made a legit product, its just a garbage one in general and not worth its nearlly $700 price tag
Posted on Reply
#32
lexluthermiester
king of swag187Except, its been proven to be fake. So again, how could that even be possible?



There we go. Even if they somehow have made a legit product, its just a garbage one in general and not worth its nearlly $700 price tag
Every one of those videos are opinion pieces that have no credible citations. If you're going to provide examples, use credible examples, not click-bait fluff.
Posted on Reply
#33
silentbogo
lexluthermiesterEvery one of those videos are opinion pieces that have no credible citations. If you're going to provide examples, use credible examples, not click-bait fluff.
Smach Z themselves? I believe they've also wanted to showcase a proto on AMD's stand during Gamescom 2018, but....never attended.
Before that, it was supposed to be a working prototype at Embedded World, which ended up being an empty shell, a custom PCB with LEDs and an AMD Dev Kit, not even suitable to go into the shell.
The same setup (only w/ USB and HDMI hotwired to a laptop, cause you can see both wires and all you had inside was a MIPI driver w/ USB passthrough from gamepad), was used to showcase a "gameplay performance" during E3 in a shady hotel room press-conference.
Here's what one of attendees had to say about it:
translate.google.com/translate?sl=auto&tl=en&js=y&prev=_t&hl=en&ie=UTF-8&u=https://www.factornews.com/preview/e3-2018-premieres-inquietudes-a-propos-de-la-smach-z-page-1-44118.html&edit-text=

The most insight can be gained from their own reddit post (this includes some awkward mentions of their critics on youtube):

So, I'm not sure whether AMD is even gonna be hosting anything, cause that's the only semi-official piece of info on either Smach or AMD website confirming TGS attendance...
Posted on Reply
#34
VSG
Editor, Reviews & News
That Reddit post itself mentions the TGS attendance though.
Posted on Reply
#35
king of swag187
lexluthermiesterEvery one of those videos are opinion pieces that have no credible citations. If you're going to provide examples, use credible examples, not click-bait fluff.
There is a decent amount of credible evidence, summarized in the posts above
Posted on Reply
#36
silentbogo
VSGThat Reddit post itself mentions the TGS attendance though.
Possible TGS attendance, possibly by Smach. It all boils down to whether the prototype is ready.
"Aiming to present" and "attending fo'reelz" are two different things.
Posted on Reply
#37
lexluthermiester
king of swag187There is a decent amount of credible evidence, summarized in the posts above
All I see is a rhetoric from nay-sayers about company trying to get a product to market, having a lot of challenges along the way and getting a lot of flak for some of it's missteps and failures. And yet they keep trying. What this reminds me of is Apple, Nintendo, Sony and oh yeah, AMD.

What is clearly absent from anything discussed or displayed thus far is any actual evidence of deception or fraud.
Posted on Reply
#38
StrayKAT
lexluthermiesterAll I see is a rhetoric from nay-sayers about company trying to get a product to market, having a lot of challenges along the way and getting a lot of flak for some of it's missteps and failures. And yet they keep trying. What this reminds me of is Apple, Nintendo, Sony and oh yeah, AMD.

What is clearly absent from anything discussed or displayed thus far is any actual evidence of deception or fraud.
Even if it was real, it's not a good design. It's billed as a handheld, but not handheld at all. At that point, you're just better off with a gaming laptop or something.
Posted on Reply
#39
king of swag187
Them stating multiple times that they had a working prototype when it has either been just a laptop routed to a small screen or a off the shelf tablet board. That is deception, and againest Kickstarter's rules
Posted on Reply
#40
lexluthermiester
StrayKATEven if it was real, it's not a good design. It's billed as a handheld, but not handheld at all. At that point, you're just better off with a gaming laptop or something.
To me is seems like a different take on an existing example of a gaming focused ultra portable, like the GPD Win or Win 2. The Win2 is the more refined of the two, obviously, but both are based on Intel parts. The SMACHZ looks more ergonomic and is based on AMD parts. While the touch-pad parts of the controller section might be questionable, it may also be a more refined and better functioning version of the Steam controllers. Thus my optimism. I am reserving judgment until the final product is reviewed.
king of swag187Them stating multiple times that they had a working prototype when it has either been just a laptop routed to a small screen or a off the shelf tablet board. That is deception, and against Kickstarter's rules
Prototypes not being the same as the final proposed unit is not a deception by any ethical, legal or moral description. No company EVER has produced a final product in a single go. There have always been concept, proof of concept, prototypes, near final prototypes and the retail ready products. Know your facts before speaking with a sense of authority.
Posted on Reply
#41
silentbogo
lexluthermiesterPrototypes not being the same as the final proposed unit is not a deception by any ethical, legal or moral description. No company EVER has produced a final product in a single go. There have always been concept, proof of concept, prototypes, near final prototypes and the retail ready products. Know your facts before speaking with a sense of authority.
You are getting confused again. A prototype is an early version of the product which has its core functionality, but may not look the same as the final product.
A dumb/empty shell that looks like a final product is called a mockup. Mockups are not prototypes. A shell with a screen and a MIPI/LVDS driver is also technically a mockup of a console.
Posted on Reply
#42
StrayKAT
I don't see how it's going to be much smaller if he keeps those Steam trackpads on (sidenote: Those are horrible btw.. the worst thing about them is they don't sustain movement, like a stick does. You find yourself dragging over and over to spin, unlike a stick which just lets you hold it in place. Not to mention that holding something in place has a better tactile feel to it. There's a sort of natural feedback to it).

edit: I'll also just point out what a bad idea PC based handhelds are because they inevitably NEED control and tweaking. They're not turnkey systems.. no matter how dumbed down you make them. You have manipulate text and configuration with PC gaming. Be it Windows or Linux.

Just having a gamepad as your only means of interaction is worthless. Just get a laptop and be done with it.
Posted on Reply
#43
king of swag187
Hell, if you want something small, get something proven not to be a scam, the GPD Pocket
Posted on Reply
#44
StrayKAT
king of swag187Hell, if you want something small, get something proven not to be a scam, the GPD Pocket
I never heard of it before, but yeah.. that's pretty cool actually.
Posted on Reply
#45
king of swag187
Check out Linus's video on it, it's pretty neat, the price is pretty high for it, but it's really cool device
Posted on Reply
#46
StrayKAT
king of swag187Check out Linus's video on it, it's pretty neat, the price is pretty high for it, but it's really cool device
Yeah, I just saw a listing at $800 for a gaming version. That's not cool. But the idea itself is very cool. If I was more enthusiastic about handheld gaming, I'd get something like that. With that price, that's probably all they are going to get (enthusiasts).
Posted on Reply
#47
Medallish
silentbogoYou are getting confused again. A prototype is an early version of the product which has its core functionality, but may not look the same as the final product.
A dumb/empty shell that looks like a final product is called a mockup. Mockups are not prototypes. A shell with a screen and a MIPI/LVDS driver is also technically a mockup of a console.
Read the kickstarter update #2, it was never hidden that the prototype wasn't running on final HW, the whole "it's fake" nonsense comes from the fact that it turns out it didn't use clickarm tech by the guys who made the prototype, a company called Rhomb.io despite them claiming it was. The functionality was there though.

And yeah those SD&R videos are pretty embarrassing, why is he so focused on the investor being a doctor or not? The guy was never part of the campaign.
Posted on Reply
#48
king of swag187
The whole "its fake" idea comes from the large pile of evidence that the prototypes where nothing more than the dust under my bed. Can you screenshot that update, as I wasn't able to find it or it was for backers only

Those videos are pretty pathetic IMO but they do provide a detailed case of the whole thing, albeit biased
Posted on Reply
#49
StrayKAT
Still a bad idea, fake or not.

Wait, I said that already.

But seriously.. all kinds of people have great ideas. Ideas are a dime a dozen. Why is this getting attention? It's not even good.
Posted on Reply
#50
Medallish
I don't see what's particularly bad about it?
king of swag187The whole "its fake" idea comes from the large pile of evidence that the prototypes where nothing more than the dust under my bed. Can you screenshot that update, as I wasn't able to find it or it was for backers only

Those videos are pretty pathetic IMO but they do provide a detailed case of the whole thing, albeit biased
Here's the link. It's public. and no it wasn't fake, it using clickarm turned out to be false, but the specs, and the intentions of it wasn't.
They haven't aired the dirty laundry, but I think we can see why rhomb.io(the guys who made the prototype and owns clickarm) Isn't part of the team any longer, and why they decided to hire their own engineers instead.

It's pretty much a coincidence but I was a subscriber for SD&R before the Smach Z thing, so I was a little extra disappointed seeing that latest hatchet job of a video.
Posted on Reply
Add your own comment
Nov 17th, 2026 14:01 CST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts