Friday, September 21st 2018
Devil May Cry 5 PC Requirements Revealed - 8 Threads, 8 GB RAM Minimum
The minimum and recommended PC specs for Capcom's upcoming Devil May Cry 5 have been announced, and it seems the game will have some thunderous requirements to start. First of all is the fact that Capcom lists as minimum an Intel Core i7-4770, paired with 8GB of RAM and an NVIDIA GeForce GTX 760. There's not much to say on the graphics card and - it's a relatively mundane requirement these days - but the number of CPU threads is slightly higher than usual. Shadow of the Tomb Raider, for example, listed as minimum a Core i3-class CPU.
Interestingly, the recommended specs maintain the RAM and CPU requirements where they stand, and only increase graphics card performance to a GTX 960. An interesting development, to say the least - the minimum is also the recommended. Windows 7 and 35 GB of available storage space round out the requirements for both configurations. Here's hoping this Devil May Cry 5 is as good as Ninja Theory's DmC.
Source:
Guru3D
Interestingly, the recommended specs maintain the RAM and CPU requirements where they stand, and only increase graphics card performance to a GTX 960. An interesting development, to say the least - the minimum is also the recommended. Windows 7 and 35 GB of available storage space round out the requirements for both configurations. Here's hoping this Devil May Cry 5 is as good as Ninja Theory's DmC.
62 Comments on Devil May Cry 5 PC Requirements Revealed - 8 Threads, 8 GB RAM Minimum
The requirements says nothing about requiring 8 threads, it says "Intel® Core™ i7-4770 3.4GHz or better".
As people should know by now, SMT like HT doesn't benefit gaming, it actually hurts gaming. Gaming is a highly synchronous task, anything impacting the threads of the game is a bad thing, either other threads in the game or other things running in the background. If you game at 60 FPS, you have a 16.7 ms window for everything the game have to do to produce the next frame. Things like HT overhead, OS scheduling overhead etc. all have an impact on stutter. It usually doesn't impact average FPS until it's really bad, but stutter is perceivable long before that.
Many people have misconceptions about cores and threads in gaming. First of all, forget threads, cores is all that matters for synchronous tasks. HT only allows cores to switch between two threads, it doesn't in any real way compare to having two cores. Secondly, multhreading is greatly limited by synchronization. It scales nearly perfectly if a workload can be split up in x chunks and processed independently, but that's not how games work. Thread synchronization usually costs 0.1-1 ms, and scheduling in the OS even more, like 1-10 ms. So it should be clear that very little synchronization can actually be done between the various threads of a game.
So how many cores do you need? You need as many cores as the game have threads with real work, plus potentially extra cores to process whatever you are running in the background.
also: oh crap here we go again with the SMT/HT argument again...
Sure there might be games that do use more than 4 threads, but probably not what I play. In fact most of my games could run even on dual core CPUs. :D (but since its good to have something for system and other stuff, then nope.. wouldnt go under 4 core 8 threads today). I think 6-12 or just 6-6 is about perfect for today and future (even very distant future, unless they wont make consoles with something like 20 cores).
A Pentium G4560 wiped the floor with Pentium G3258 @ 4.7GHz when I compared those. Also, i5-7600K @ 4.7GHz was pure crap when playing Far Cry 5 and streaming it. i7-7700K @ 5GHz eliminated all the problems.
Honestly... it's not like CPU specification is secret or something. You think that the whole world beside you is wrong? :-)
That's 5+ core boost and XFR, respectively (@Wiki)
So the base clock is 3.2 Ghz in real usage.
And I've never seen more than 1 core going over 3.2 Ghz when being pushed, even when pushing just 2 cores. That might be XFR 1.1 or whatever is called on Ryzen 2000 series, but not the first XFR on first gen CPUs and chipsets.
OC your Ryzen to 3.8GHz. Is 3.8GHz the new base frequency? :-D
without any manual intervention or overclock or whatever
it never stays at 3 Ghz, no matter what the specsheet says and no matter what load you put it under
CPU frequency should drop to lower p-states under low load.
Nothing wrong with my sample, this is prob AMD's marketing when they say that it's a 3 Ghz CPU with an "all core turbo" to 3.2 Ghz on any type of load
So, regardless of the marking bull, in reality it's a 3.2 GHz base clock CPU. You can check on multiple reviews that it never maxes at 3 Ghz.
Perhaps you should have used the FX line, which was 8 cores but only 4 FPUs for your hypothetical argument instead of a true 8 core.
If a game has hard-coded limit for threads, it won't run on CPUs with less. A hard-coded limit for frequency would work exactly the same way. If it's 3.4 GHz, game won't run on 3GHz - no matter if it's 4, 8 or 20 cores.
Not that I think this will be true here, but I recall a game that didn't want to install on my notebook and the error message precisely said that I have less than some desired frequency. So it surely happened before. :-)
I hope you understand that for a single-threaded process a 4-core 3.4GHz CPU is faster than an 8-core 3 GHz one (ceteris paribus). :-)No one says it maxes at 3 GHz or that it should stick to this frequency. 3 GHz is the base value - end of story. A CPU will drop below in low load and - if some kind of "boost" is provided - will go above the base under heavy load.
Boost idea is not a new one and certainly not exclusive to Zen. It always behaves like that.
My i7 has a true base clock of 2.8 Ghz and will boost up to 3.8Ghz under optimal settings, but if they're not met it defaults to 2.8 Ghz. Ryzen 1700s n-e-v-e-r use the 3.0 Ghz frequency, their base clock is 3.2 despite whatever marketing oriented spec sheet says.